Running commands in vMA

Similar Questions

• do not appear my "RUN COMMAND" under Xp in startup items

  I need to recover the option "Run command" in my list items in the start menu?  How should I do?

  Hi GermanTrade,

  You can follow these steps and check if it helps.

  a. right-click on the Start button, and then click Properties to open the window "Taskbar and Start Menu Properties".

  b. click "Customize" to open the "Customize Start Menu" window.

  c. click on the "Advanced" tab

  d. in the list of "Items on the start menu", check the box "run the command.

  e. click 'OK' to close the window "Customize Start Menu", then "OK" to exit the "Taskbar and Start Menu Properties" window.

  Hope the helps of information.

  Please post back and we do know.

• How to restrict the running command prompt?

  How to restrict the running command prompt?

  I already know the method: HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System DisableCMD: 2

  but, but, it is possible to change reactivate cmd used much the system tool software

  So I want to deny the change of registry value by the software used, I changed all permissions to the registry [System] refusal keys with my account.

  but after a modified registry key permissions denied, disableCmd was inactivated more.

  It is impossible that the two parameter [disablecmd: dword = 2] and [{System} lock keys: administrator of the deny all permissions in my account]?

  This issue is beyond the scope of this site which is for the consumer to related issues.
  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How can I get run command Wizard in windows 7

  How can I get run command Wizard in windows 7

  Help & Support:

  That became the command run?

  The run command no longer appears on the start menu in this version of Windows. The search box that appears in the start menu provides much of the same functionality as the command run. However, the command run is still available if you prefer to use. You can even add it to the start menu for easier access.

  To add the run command to the start menu
  Click to open the taskbar and Start Menu Properties.

  Click the Start Menu tab, and then click Customize.

  In the list of options on the start menu, select the command box run and then click OK. Run the command will appear on the right side of the start menu.

  Tip:
  You can also access the command run by pressing the logo Windows + R key.

• How to run commands inside a virtual machine?

  Hey,.

  I train hard run commands inside a machine virtual on vSphere (batch scripts) and could not find a good way to do it,

  in ESX 3.5 "vmrun.exe" did the job, but it does not work on vSphere for some reason any.

  I also tried to do with PowerCLI but could not find any help for this command.

  Am I missing something?

  Maybe my syntax of the command is wrong and someone can give me the proper syntax?

  Im sure there is a way to do it and would appreciate any help that anyone can give me.

  Thank you very much in advance,

  Omer

  vmrun must work with vSphere, in fact, vSphere is the only version of ESX that vmrun (and the VIX API, on which is built vmrun) officially supports. ESX 3.5 is only experimental support.

  Please make sure you have the latest version of VIX installed; You can find it at www.vmware.com/go/vix.

  Once you have installed, if you still see an error, please post what this error is and what kind of host you are using vmrun.

• commands using vMA

  I have installed and configured the vMA 5.x.  I added and saved my server vcenter and two hosts (ESXi01, ESXi02).  When I connect to the vMA using vi-admin and target host ESXi02 I can run all my orders with numbers.  However when I connect to the host ESXi01 and I try a command like resxtop, I am prompted credentials of the user, credentials I try fails with "connection failed, reason: vim.fault.NoPermission" or "connection failed, reason: vim.fault.InvalidLogin.  Although when I connect all first using the vi-admin account I tried to provide the vi-admin account, I also tried to use my windows credentials and it does not work, also I tried using that account from the root of the host and which fails as well.  The two hosts are exactly the same, so I do not know what are the credentials for a host and not the other.  It's really irritates me so any help is greatly appreciated. clair

  Check permissions in the vSphere Client that connects directly to the host, if users of vMA went just to run another vifp reconfigure.

• scripts running remotely from vma to esxi

  try to run a file on a server esxi bash to take snapshots of vma with ssh commands. is this possible?

  2 esxi servers. a standyby of an asset. a day before two scripts that backup host1. I have no problem running it locally from Server 2

  but when I try to run the command remotely via ssh of vma, it does not

  Check the script to make sure that the full path to the 'my text file' exists. I would never use spaces or special characters in the warehouses of data, files, name vm, etc. Use underscores if you want to separate words for clarity. Spaces require a lot of additional error control and programming. To use spaces or special characters, you must escape at all.

  my text file would be my\ text file

• How to run commands from the Terminal from the Finder?

  I would ask a series of Terminal commands in a file, then run the commands by double-clicking on the file in the Finder.  I found a number of sources on how to do on the internet, but most include comments from other users by saying: "this has not worked for me.  I have not found a definitive 'it's how

  I created a test file, use TextEdit, named test.commandand saved to my desktop.  The file contains these commands:

  ! / bin/sh

  chmod + x ~/Desktop/test.command

  echo 'Hi. ' here

  echo 'Hi' once again

  When I double-click the file, however, it sometimes just opened in the Finder.  Other times, I get an error message saying I don't have permission to run the file.  I thought that the chmod command was to manage the authorization, but maybe I'm not using it correctly.

  Can anyone help?

  #! / bin/sh

  You must # follow-up by the! as the very first 2 characters of the file.

  And as bash is the default shell, you should probably actually tell

  #! / bin/bash

  The chmod + x command should be performed after you have created the file test.command, not inside her.

  Another way to run shell commands is via Automator-> run the Shell Script

  Automator has no need to open a Terminal Services session to process orders.  But if you want to have the command display something, it might be simpler to use a .command file, although there are ways to view things in an Automator app as well.

• lThe cannot run command

  When attempting to open attachments to emails, I get the window that says: "the command cannot be run."  Help!

  Hi Inkydo,

  Thank you for using answers Forum.

  What mail client do you use?
  What Internet browser is your default? (Internet Explorer, Firefox, Chrome, etc.).
  What kind of attachments are you try to open it? (Document Word, PowerPoint, photo, etc.)
  Can you post the file of the attachment (.doc - .docx - .jpg) extension

  If your use of Windows Mail, I suggest you upgrade to Windows Live Mail.

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All the tools of Management\Administrator has disappeared - restore disabled, no run command, msconfig, etc..

  My daughter has run an .exe file on her netbook and has been infected. The antivirus (MS Essentials) got off, restore power off, msconfig and the management of all tools would appear on the screen and then disappear. Online scanners didn't work, even if it was said he had a virus: the great W32/CEP.worm! ini.  I have restored from the partition hidden (from Acer erecovery) and have been updated to the new facility. I installed and run AVAST a couple of times during this process-OK. All of a sudden, I noticed the command RUN is missing from the start menu, and he withdrew some advanced options. Still once the restore has been turned off and all management tools only Flash on the screen before disappearing. I just ran AVAST on 'more sensitive' settings, and he comes clean.

  I lose these tools because of one of the many updates or could a virus has infected the erecovery partition (Avast does not see this partition)? Thanks for your informed reply.

  Michael

  Michael,
  According to the recovery option, it is possible that the virus was not completely removed.  I suggest that you restore the system and use the option that formats the hard disk before starting the installation.  Once it is in place and I executed would then put a few antivirus programs on a disk or a USB stick and then run them before getting online.  Then once you get online just updated windows update and drivers of material and then scan your system.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Running command-line Windows (path problem)

  Hello

  It's kind of weird, but I can't run the command line in windows 7 due to the long way and spaces...

  I want to run the command:

  Hey,.

  Here is a link to a page that should help you figure the number of channel and fix it manually:

  http://superuser.com/questions/12695/javac-command-not-found

  the instructions are on Windows XP, but should be able to transfer to Windows 7. Good luck!

• Cannot run command to config the NAC perfigo service

  I have a new Server Manager of the NAC for a deployment costs. I logged in using the root with a connection password set on the server.

  I can't be able to run the 'service perfigo config' command to perform the initial configuration of the CAM.

  [[email protected] / * / /] # start service perfigo

  perfigo: unrecognized service

  [[email protected] / * / /] #.

  No idea what could be the problem?

  Thanks in advance.

  Have you installed the CAM software on it, or it was already installed?

  If it was already, I recommend you the image with the DVD.

• User cannot make a sh run command

  Hello

  Recently, we have configured a version 4.2 GANYMEDE. and I create profile readonly to a group with the privilege level in the 5. now, users are unable to issue a command "sh run". except that the user is able to run all show commands.

  Someone help me please in the present.

  If possible someone please send me the document on the levels of the different privileges and acceptable control in this level from 1 to 15.

  To see the race, you will need to give private 15. ACS works differently compared with setting up local priv lvls on router/switch.

  Best way to put in place is to give all the user priv lvl 15 and then define what orders user can run.

  Note: After having 15 private does not mean that the user will be able to issue orders.

  We will configure permission command on acs to have control over users.

  This is how your config should look like,

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + authenticated if

  AAA authorization commands 1 default group Ganymede + authenticated if

  AAA authorization commands 15 default group Ganymede + authenticated if

  AAA authorization config-commands

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

  Kind regards

  ~ JG

  Note the useful messages

• ExtendScript Toolkit running command-line - approved place message

  I run the following in a command line of Windows 7:

  "C:\Program Files (x 86) \Adobe\Adobe ExtendScript Toolkit CC\ExtendScript Toolkit.exe"-run "C:\Users\john\AppData\Roaming\Adobe\InDesign\Version 11.0\en_US\Scripts\Scripts Panel\example.jsx".

  However, I get the message "you are about to run a script in Adobe InDesign CC 2015. You should only run scripts from a reliable source. "You want to run the script", with Yes/No options.

  I was wondering if there is a way to remove this message from appearing. According to Indesign Java Script running error, this message is deleted if the jsx script is located in a trusted location. I thought that C:\Users\john\AppData\Roaming\Adobe\InDesign\Version 11.0\en_US\Scripts\Scripts Panel is a trusted location.

  In my documents

  Folder.myDocuments; ~/Documents?

  Do Folder.myDocuments.execute ();

  Should see a folder called it Adobe Scripts.

  If it not is not, create it.

  HTH

  Trevor

• CDF to run commands / Shell scripts

  Hi friends,

  I need help serious here regarding the CDF function.

  I created a JAR file to run batch/shell scripts via the calculation script.

  I tested the JAR file and it works perfectly well that run without the calculation script, but I get errors including in Calc script, I get the error message.

  Initially, the error was: error of Machine virtual Java and later, it is class not found.

  Here are the steps to register the CDF:

  1. place the JAR file in the location: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\udf\

  2. update the file udf.policy with the following statement:

  Grants all permissions to BatEx

  give the code "file:${essbase.java.home}/BatEx.jar" {}

  permission java.security.AllPermission;

  };

  3 restart the Essbase services.

  4. I am trying to create this function at Global level so no mention is not the name of the Application in the MaxL at registration:

  create or replace function '@BatEx' as

  "BatEx.

  Spec '@BatEx(Complete path in double quotes) '.

  Comment "Functions A CDF that runs the batch file in Essbase Server";

  5 this is the calc script:

  @BatEx 'E:/Oracle/Middleware/EPMSystem11R1/common/utilities/Test.bat '; -It gives an error: error: invalid syntax 1012000 - not a command CALC [@BatEx]

  I tried another way:

  RUNJAVA @BatEx 'E:/Oracle/Middleware/EPMSystem11R1/common/utilities/Test.bat '; -Gives an error: problem running [@BatEx 'E:/Oracle/Middleware/EPMSystem11R1/common/utilities/Test.bat']: [can't find @BatEx class]

  Where I am wrong here? Please help me out here.

  Kind regards

  RB

  Thanks much Amit and Jake! I finally cracked!

  Sad thing is that I have found no OTN correct information regarding function Java Custom, rather there was a lot of information about CDFs pre-existing provided by Oracle, so I decided to write a complete solution of CDF, where Java code too was created by the developer of Essbase applications.

  The requirement that I had was to trigger the batch file in the calculation script. Here is the detailed requirement:

  Update Variable of Substitution by planning web form.

  1. the user enters the data in the form of the planning web and saves it.

  2. the calc script attached to the web form, extracts data and records the flat file on Essbase server.

  3. earlier we were executing the script batch on the web server as the workflow will identify the lots on the web server and not on Essbase server, but after the development of this CDF to run the batch job, the batch files can be run directly Essbase server.

  4. the idea is to keep the user limited to the tasks list, so that it does not jump to the to-do list to SubVar web form, workflow and then return to the task list for a simple job to change SubVar.

  There were a few challenges that I encountered during the development of this JAVA function, namely:

  1 function CDF records do not : I tested JAVA code separately using command line and the executable Jar file will execute the batch, as expected. But I couldn't get why my CDF is not have recorded trace. After a lot of searching on Google and analysis, I found that it was the difference between the Version of JAVA (the JAVA compiler I used to compile and create my JAR file) and JAVA (JVM Essbase) virtual machine. I used JDK 1.7 update 65 to compile and create my POT so that the JVM used in the Essbase Server Update 1.6 is 35. I uninstalled JDK 1.7 of my machine, downloaded Update 1.6 35 archives of the Oracle and recompiled the code. Guess what! My CDF function was recorded first.

  So always check the compatibility of the Version of the JDK you used to compile and create the JAR file and JVM on your Essbase server.

  You can check the version of the JVM in console EAS-> EssbaseCluster-> right click-> Edit-> properties-> tab environment. There is a line that appears something like:

  ; JvmModuleLocation $J (EPM_ORACLE_HOME)-...-jdk160_35\jre\bin\server\jvm.dll (the bold is your version of the JVM).

  2. "main class not found" error after successful registration of CDF:

  I haven't had that one category of Public in my JAVA code and this error took me by surprise. I also checked the "public static void main" section in my code and everything seems to be OK. Please note that JAVA is case sensitive - 'hand' and 'Hand' aren't even in JAVA.

  I did some further research and one of John's response to a CDF request, I came to know that I need to include another argument (context) in the main section of my Java code and recompile with classpath "essbase.jar" (I will explain the controls in the next steps). I changed the main section of my JAVA code and included the argument:

  Public Shared Sub main (paramContext context, String [] paramArrayOfString)

  The following JAVA code to perform the batch in Essbase Server:

  import com.hyperion.essbase.calculator.Context;

  import java.io.BufferedReader;

  import java.io.InputStream;

  import java.io.InputStreamReader;

  import java.io.OutputStream;

  import java.io.PrintStream;

  public class BatEx

  {

  Public Shared Sub main (context, paramContext, String [] paramArrayOfString)

  {

  Try

  {

  String str1 = paramArrayOfString [0];

  LocalProcess process = Runtime.getRuntime () .exec (str1);

  InputStream localInputStream1 = localProcess.getInputStream ();

  OutputStream localOutputStream = localProcess.getOutputStream ();

  InputStream localInputStream2 = localProcess.getErrorStream ();

  BufferedReader in = new BufferedReader (new InputStreamReader (localInputStream1)) localBufferedReader;

  String str2;

  While ((str2 = localBufferedReader.readLine ())! = null) {}

  System.out.println (str2);

  }

  System.out.println ("package executed successfully.");

  }

  catch (Exception localException)

  {

  System.out.println ("error!:" + localException);

  localException.printStackTrace ();

  }

  }

  }

  Install the (compatible to Essbase JVM) compatible version of the JDK on your machine. Compile the above code by using the following command:

  C:\ >javac - classpath essbase.jar BatEx.java - please specify the path to the file "essbase.jar". It generally to the location: : \Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\

  The code should compile without any problem, and a .class file must be created with the same name.

  Now is the time to create the JAR file. Use the following command:

  C:\ >jar cf BatEx.jar BatEx.class

  Now the executable JAR file must also be created.

  Place this JAR file: : \Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\udf\

  Restart the service of Essbase and application (the only Application Restarting should work, but I didn't take any chances to restart both).

  Check the log of function CDF recording applications. The application log should be at the location:

  : \Oracle\Middleware\user_projects\epmsystem3\diagnostics\logs\essbase\essbase\app\-

  The CDF enrollment message should be something like:

  External function of [GLOBAL] [@BatEx] saved OK

  I used the following MaxL to register my function in Essbase:

  create or replace function '@BatEx' as

  "BatEx.

  Spec '@BatEx (StringArray).

  Comment "Functions A CDF that runs the batch file in Essbase Server"

  I used the following script to calc to run my CDF (fairly simple however):

  ESS_LOCALE English_UnitedStates.Latin1@Binary

  RUNJAVA BatEx "": / Oracle/Middleware/EPMSystem11R1/common/utilities/Test.bat ";" -Note: please replace with the name of the physical drive.

  I went and checked the logs that the Test.bat written and "wallah! The log file had some content and 1 KB in size. I deleted the contents of the log file and checked again, the result was the same.

  Hope this answer helps all of us who work on CDF that is clean.

  Please like this post if this can help you in some way.

  Thanks again to Amit, Jake and John for helping me solve this puzzle.

  Kind regards

  Amit Kumar Singh