RV082 disable firewall remote management AND

Similar Questions

• Need help for remote management and SBS 2003.

  I can manage the server remotely, but try to make the computer customer is a bust. don't know if I'm missing a plugin or something else. all customer mailboxes are XP sp3.
  Do you need a SMS server just for 7 boxes?  Go ahead, change is grouped bot not SMS?
  IDK, I inherited this network.
  I can install 3rd pty software on all the boxes, but then why do I a remote on the server management option?
  I'm confused & pretty angry atm

  Your question would be better in the Technet forums where the network and system administrators to wander and have a lot more experience with Small Business SERVER 2003: http://social.technet.microsoft.com/Forums/en-us/categories/

  RDP ports are open on the XP boxes? The RDP service runs on them? I'm not too familiar with it on SBS, but could check those.

• Intel wifi adapter xps m2010 disabled in Device Manager and in the network and sharing Center

  Original title: intel wifi adapter xps m2010

  for some reason any my intel pro wireless network adapter not turn on using the shortcut keys or by selecting with the mouse. Says its disabled in device in network and sharing Center Manager yet it does give me the option to activate it. Im confused

  Hi pillowgod,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  You can check the following link and try to run the manual Intel WiFi diagnostic tool to check the functionality of your WiFi adapter.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025780.htm

  You can also try uninstalling and reinstalling the Intel wireless card and check.

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the network adapters in the Device Manager

  c. right-click on the device, and then click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  e. restart the computer and check.

  You can also see the Intel Web site and try to download the latest version of the card wifi drivers.

  http://Downloadcenter.Intel.com/default.aspx

  You can also check out the link:

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025807.htm

  Hope this information is helpful

• Enable remote management on FVS336gv2 through CLI

  So I did something incredibly stupid to try to solve a problem, that we had and I have disabled HTTPS remote management in the GUI and now I am not able to make the interface of the routers.

  I can however, Telnet to the router from Telent is activated.

  How can I enable https remote via the CLI management? I can't find anything in the CLI PDF or I'm missing something.

  Thanks in advance!

  Hey,.

  Should be enough for;

  # remote_management https system set up

  # access_type all

  y # enable_ipv4

  # ip_version ipv4

  # Save

• How to disable Lenovo energy management

  I have Vista Home Premium on my Y430. Once I disabled Lenovo Energy Management and used the Vista build-in power management. My impression was that the battery lasted longer when you use the build-in one than Lenovo Energy Management (4 hours from 3 hours in symmetric mode).

  I activated there is Lenovo energy management. But now I don't remember how to turn it off. Does anyone know how to disable? Thank you very much.

  I found a way to disable management of the energy of Lenovo using Windows Defender. Click 'Start'--> 'All programs', right click on "Windows Defender", select "run as Administrator". Click the 'tools' at the top of the window, and then click "Software Explorer". Click on 'Show for all users' in the lower left corner. In the "Category" list, select "startup programs". Select "Lenovo Battery Management Software VerX.X" on the left panel. At the bottom of the Panel, click the button 'Disable' (or 'Remove'). Lenovo Energy Management this will prevent to run the next time that you start your laptop.

  To activate it, just follow the steps above and click 'Activate' to the last step. Or you can go to 'Control panel'--> 'Power Options'--> 'change plan settings'--> "Change power settings advanced"--> "Lenovo Energy Management" to enable it.

• Administrator has disabled regedit/Task Manager

  Until 3/12 my computer was fine, then suddenly, it presents the message that the administrator has disabled the Task Manager and registry editor. I did not anything that would affect other files only by using the Task Manager to monitor the activity. I'm unable to fix this problem and need help. Thanks in advance for any help.

  Your computer is infected. You may be able to clean it, but based on your user name and your message, I would say that you would be better to take it to a competent local professional. I don't mean to hurt your feelings, just to be practical.

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• You run the remote Manager

  Friends,
  as I prove the Manager remotely to run successfully.
  I followed the installation documentation and start the remote remotemanager.bat Manager, then when I can prove that it is running, it loads a console and designer
  
  Thank you.

  Remote Manager allows you to run code on a remote box. You can create a jar file that performs a task. Copy it to the JavaTasks folder on the server of the IOM and the Manager remote server. When you perform your connection by using a resource, you select a remote control for the type of task, then it shall provide the values of Manager remotely as well as the resource.

  An example of what it does: Let's say a 3rd party host your servers, but they can not just open all the ports you need. Instead, you install remote manager and then they have to open 2 ports Manager remotely (if you are using SSL) and all information will be sent through this port.

  You can test that it is running by accessing the console design and open distance element manager to make sure it contains running.

  -Kevin
  Give points where points are earned

• I looked in the addons Manager and I seem to have 5 versions of java installed console, do I have all or can I disable all, but later?

  I see 5 versions of the java console addons, 6.0.04, 6.0.07, 6.0.10 6.0.12 Manager and 6.0.14.Do I need all these or should I disable all, but later?

  If properly uninstalled plugins for Adobe Reader and Foxit Reader should also uninstalled in the process.

  Be careful with the Windows registry, unless you know what you're doing.

  • Always back up the registry to another source; not the current hard drive.
  • Use a program that will offer to back up the registry keys that you delete.
  • Always have a boot disk (CD/DVD, USB key) just in case you make a mistake.

  You can use Windows search to locate the plugin files and delete them if they are on your hard drive and leave the single registry. Find and delete the following files while Firefox is completely closed. After you delete the files, launch Firefox, look at your plugins, addons > Plugins, to see if the two plugins are gone.

  • The Adobe Reader plugin name: nppdf32.dll
  • Foxit Reader plugin name: npFoxitReaderPlugin.dll

  A few links for you to watch:

  1. Foxit Reader:
     • http://www.foxitsoftware.com/support/showfaq_technical.htm
  2. Adobe Reader:
     • http://kb2.Adobe.com/CPS/400/kb400769.html
     • http://www.Adobe.com/cfusion/search/index.cfm
     • http://kb2.Adobe.com/CPS/836/cpsid_83690.html

• Time to update the BIOS and firmware of remote management?

  I'll put up a 'new' ThinkServer RD630 (2954A6U). It was purchased for a project that never happened, and we are now dry and reuse to replace an old Office Server. The current firmware versions are:

  • BIOS: 2.05
  • ME: 2.1.5.73
  • BMC 1.7
  • IPMI 2.0

  Page 61 of the User Guide ThinkServer says, "update the BIOS on your server only if the new BIOS version specifically solves a problem you have. We don't recommend updates to the BIOS for servers that do not need. [...]"

  As far as I know, we have no problems. The system starts fine and runs Windows Server 2012 well enough.

  HERE'S MY QUESTION:

  Should I update the BIOS and firmware IMM (remote management) to the current version? Are there hidden problems, security issues or other concerns that it is worth?

  Other indicators of initial configuration that you can share with a new admin would be much appreciated, too! Thank you.

  With the help of the Lenovo Support, I was able to fix my problem where I couldn't get to the menu of the BIOS of the 630 RD (in F1) and all I saw was a cursor on the screen. I describe the procedure in detail here:

  https://forums.Lenovo.com/T5/ThinkServer-rack-mounted/BIOS-settings-blank-with-cursor-after-BIOS-UPD...

  Thank you to all those who commented above and especially to those who have sent me suggestions via PMs.

• Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Jim Eckland

  Jim,
  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Run and disabled the Task Manager... What do I do?

  I'm running a windows 2000 XP Professional and LONG time ago my race and my task manager has been disabled. I couldn't find the answer, so I need help on how to solve it. So my question: how to unlock the Task Manager and run?

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• (Management and port number) firewall rules

  Someone at - it information on how to get management and port number for a given ESX host firewall rules using the 'VI Perl Toolkit?'

  For some reason, I can't work this one on. I can get to:

  $host - & gt; config - & gt; Firewall - & gt; set of rules

  and from there I can get the label and the State enabled, etc., but I want to delve into the section rule to get the port number and the management as well as for each service.

  For example, from the CROWD:

  HostFirewallRule	Name	Type	Value
  Direction	HostFirewallRuleDirection	"entrants".
  dynamicProperty	[DynamicProperty]	Unset
  dynamicType	string	Unset
  endPort	int	Unset
  port	int	5989
  Protocol	string	"tcp".

  |

  How can I get this information for each service?

  Thanks in advance

  If you found this helpful, please consider awarding points

  Hi Paul,.

  You will need to first loop through the array rule set of firewall and from there you will get some properties this State if it is active, service, etc. and you will also have access to an array called rule that contains the rules within each of the ruleset. Once you go through the rules, you will find information about the direction, endPort, port and Protocol

  Something like this should work (there will be values that will not fill as endPort, so make sure you check before printing/etc.)

  my $fw_ruleset = $host->config->firewall->ruleset;
  
  foreach(@$fw_ruleset) {
       my $rules = $_->rule;
       if($_->enabled) {
           print "Firewall Rule: ", $_->label, "\n";
           foreach(@$rules) {
                print "Direction: ", $_->direction->val, "\n";
               print "End Port: ", $_->endPort, "\n";
               print "Port: ", $_->port, "\n";
               print "Protocol: ", $_->protocol, "\n";
            }
            print "-------------\n"
       }
  }
  

  Here's a quick snippet out:

  Firewall rule: SNMP Server

  Direction: inbound

  Use of uninitialized value, catalogue in ligne./vmwareHealthCheck.pl 1748.

  Ending port:

  Port: 161

  Protocol: udp

  Direction: outgoing

  Use of uninitialized value, catalogue in ligne./vmwareHealthCheck.pl 1748.

  Ending port:

  Port: 162

  Protocol: udp

  -

• Change the settings for the Windows Firewall remotely

  Is there a way to change the Windows Firewall remotely stand-alone setting? I read that I can disable the firewall service using computer management and the connection to the remote PC but what I want is to change the settings.

  Best regards.

  You could do this with PowerShell as you have administrative access to the remote computer.  I would spend the TechNet forums, since it is outside the scope of this consumer site.

  http://forums.technet.Microsoft.com

• Unable to connect to remote PowerShell and get error message.

  I have two computer to Windows 7.

  Unable to connect to remote PowerShell and this error message

  nvoke-command - computername XXXXXX - scriptblock {}
  get-process} - administrator credentials
  [XXXXXXX] failed to connect to the remote server XXXXXX with the
  error message: WinRM client cannot process the request. If the
  authentication scheme is different from Kerberos, or if the client computer is
  not joined to a domain, then HTTPS transport must be used or the destination
  machine must be added to the TrustedHosts configuration. Use winrm.cmd
  to configure TrustedHosts. Note that computers in the TrustedHosts list might
  do not be authenticated. You can get more information about it by running the
  following command: winrm help config. For more information, see the
  about_Remote_Troubleshooting help topic.
  + CategoryInfo: OpenError: [XXXXXX], PSRemotingT
  ransportException
  + FullyQualifiedErrorId: ServerNotTrusted, PSSessionStateBroken
  PS C:\windows\system32 >

  PS C:\Users\Administrator > Invoke-Command - ComputerName XXXX - ScriptBlock {get-process} - administrator credentials
  [XXXXXX] failed to connect to the remote server XXXXX with the following
  error message: the client cannot connect to the specified destination in the
  request. Verify that the service on the destination is running and that he accepts the
  applications. Consult the logs and documentation for running management service
  on the destination, most IIS or WinRM. If the destination is the WinRM
  service, run the following command on the destination to analyze and configure the
  WinRM service: "winrm quickconfig". For more information, see the
  about_Remote_Troubleshooting help topic.
  + CategoryInfo: OpenError: (XXXXX:String)], PSRemotingTranspo
  rtException
  + FullyQualifiedErrorId: CannotConnect, PSSessionStateBroken

  # Outgoing connection is fine because I can connect to a different machine here. However incoming connection does not work

  # Tried several things like "Enable-PSRemoting - Force." and it starts Properperly

  # And since I put the machine in workgroup, as well run "Set-Item WSMan: \localhost\Client\TrustedHosts * ' (it is running successfully as well)

  # Infact WinRM QuickConfig will not work.

  # And tried with and without firewall. and also applied several patches, but has not solved the problem

  Please notify

  Original title: WinRM

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it