S10e - no WiFi after 14CN94WW

Similar Questions

• slow to connect to WiFi after sleep

  I have a Mac Book Pro late 2008. Just installed a new SSD Yosemite running. It takes up to 30 seconds to connect the ti WiFi after sleep.

  Try to purge your list of favorite networks and dragging the networks you really want at the top of the list

  System Preferences-> network-> wireless-> advanced-> preferred networks

  The Mac will go through the list looking for networks to connect to in the order that they are in the list.  Reduce the size of the list and make sure that those you really want is near the top of the list.

• HP deskjet 3052 has works on my wifi after I reset the printer / modem/router - but failed later

  I had my HP Deskjet 3052 a work from PC, MAC, iphone / ipad on my Airlink wifi after a reset on the printer - router - modem.

  It fails when I try to use it later in the day - unless I'm resting again.

  Do I have to reset each time I print?

  New modem/router solved my disconnect problem - but I still cannot connect my imac running Mac OS X 10.5.8.

  I am connected to the wireless - i.e. - accesses the internet, I cannot connect deskjet - is told by the way now I hace a 3520e model - instead of the 3052.

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• HP Pavilion dv6 Notebook PC: I can not turn on Wifi after upgrade to windows 10. Having to uninstall my VPN system

  No wifi after windows 10. Uninstall my VPN afterwords, but still a problem of sam.

  The keyboard button vill not turn blue. Tryied the Microsoft solution

  

  Hey @Lajen,

  You will need to return the system to Windows 7 using your diskettes. All this work and then upgrade to Windows 10 has.

  Thank you.

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Pavilion p256ur: problems with Wifi after waking up (only)

  I have a problem with my new laptop Pavilion p256ur. After he wakes up (only) the wifi (Broadcom BCM 43142) adapter does not. turned on in device management, it can not find any network. WiFi button (in the system settings menu and status bar) don't respond - it seems that the wifi is turned off. I try to:

  1 power off and power on this card in Device Manager

  2. turn off power off (to save energy) option in the settings of the adapter

  3 (default) old uninstal and install the most recent drivers

  4. install the latest driver for chipset

  5 control wlansvc service-, she strives to after wake up

  but his do not solve the problem.

  If I try to reinstall the drivers wifi after last stride upward of his works, but until the next morning to the top.

  In an event list management device devices there is a message:

  Bcmwl64.inf_amd64_0f3430bbd776c163\bcmwl64.inf installation driver for device with ID PCI\VEN_14E4 & DEV_4365 & REV_01\0000E2FFFFCDD85D00 & SUBSYS_2230103C, supplemented by the following condition: 0x0.

  After the system restart wifi works correctly, so if I want to use the wlan I must not sleep notebok. but restart it every time (or reinstall the drivers) is not comfortably. can you help me please?

  Hi @Medvejo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15-p256ur HP Pavilion Notebook and Wifi problems after wake up. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button. Figure: 13 choose what the power buttons. -Uncheck allow the computer to turn off this device to save power under the management of the power supply of the wireless adapter.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Aspire E1-731 Atheros ar956x driver display Code 52, no. WiFi after Windows 10 Upgrade

  I have no wifi after upgrade from 8.1 to 10 Windows Windows on this machine. I made several delete/undelete, install/uninstall such operations suggested by the people here and elsewhere. What is happening is the driver information continually show error code 52: «Driver not signed...» "I also ran the usual troubleshooting suggestions to Microsoft, including the verification of compatibility and there is no problems found. Then... there at - it workaround, a patch or driver Windows 10 Acer available or what should I wait until MS comes out with another update? Thank you!

  Russ

  Uninstall any driver Atheros, download this:

  http://www.station-drivers.com/index.php?option=com_remository&Itemid=352&func=FileInfo&ID=1895&lang...

  (100% trusted Web site)

  Unzip the file and run the installer.

• HP Pavilion Notebook: No more Wifi after update realtek wireless LAN drivers

  Thus, HP support Assistant said I had to update the 7 things. Including RealTek Wireless LAN drivers. After having done that, I've disconnected my wireless network. When I click on the internet icon in the bar below, it shows only a "Airplane Mode" button and that's it. Before, it would also show all available networks. I don't know what I have to do, but I need a quick fix!

  Peppers

  Hello;

  Let me welcome you on the HP forums!

  I read your post about the loss of WiFi after a driver update and wanted to help.

  I see that you are running Win10.  Then, click the start menu and open the Device Manager.

  When you find the wireless network device, try rolling back the drivers to the previous version.  With a little luck, after you do this and you reboot, the WiFi will work again.

  And if it works, then disable HP Support Assistant so it won't mess up your drivers more.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• dysfunction of the WiFi after update iOS 10

  I updated my iPhone iOS to iOS 10 6. Now, I can not connect to any wifi. I reset the network settings, but it still does not work. Help please.

  Thank you Apple support communities, city of angelicafromquezon.

  I see that your iPhone 6 is unable to connect to a Wi - Fi network after upgrade to iOS 10. I'll be happy to help you.

  If your iPhone, iPad or iPod touch connects to a Wi-Fi network - Here are the troubleshooting steps to help you connect your iPhone to a Wi - Fi connection.

  If a Wi - Fi connection is gray or Sun on your iPhone, iPad or iPod touch -here's some information for you if your WiFi settings are grey or Sun.

  I hope this helps!

• iPad and iPhone 6 disconnection from the Wifi after IOS 10 improvement

  A problem with maintaining connectivity to my home wifi network, I noticed on my iPad and my iPhone 6.  I'll do an alert on the iPad (which is Wifi only, not LTE) that it cannot detect the Internet. He sees my router but says 'no Internet connection '.  Same thing is happening with the iPhone 6, which translates by he's going to LTE and eat in my data plan.  In both cases, I have to re - start devices and reconnect to my wifi network.  I'm having no problems with non - IOS devices (Samsung Nook, a Roku player and a Smart TV) with my wifi network at home - two Apple devices I am owner of running IOS 10.  Is there a problem with the maintenance of wifi connections?

  Hello rm2static,

  Thank you for using communities of Apple Support. It is my understanding that your iPad and iPhone 6 have been disconnect from your home network after updating to iOS 10. I can surely see how it would be about, so much more than other devices are connect well. I'm happy to help you to get this resolved with you.

  First of all, I recommend you to reset the network settings. Tap Settings > general > reset > reset network settings. This operation brings back all the network settings to the default settings, including the Wi - Fi networks and passwords, cell settings, VPN, and APN.

  If the problem persists, try with another Wi - Fi network. Additionally, make sure that your Wi - Fi router has been updated with the latest firmware.

  See you soon!

• My Wifi after downgrading to iOS to iOS 9.3.4 10 does not work

  Hey guys,.

  So today, I got my iPad 2 beta Air 10 5 IOS to iOS 9.3.4 because iOS 10 didn't really fit me. in any case immediately after the decommissioning of my iPad, I had to put my wifi password which I did but then he says that he was incorrect, so for the next 15 minutes I tried just to put my wifi password correctly (I have 100% know) and it kept coming up with pop - up 'incorrect password '. I was wondering if anyone had any idea of this.

  You should start with the usual suspects. First settings > general > reset > reset network settings. Who should empty all junk. Then restart, hold down the sleep and home buttons until the Apple appears. Try again and see what are the symptoms.

• Why 2009 MacBook says "no hardware installed for wifi" after the update to El Capitan?

  I just updated today and after that he finished the wifi icon had the message "no hardware installed" I checked a few other places to see what I could do and I tried to reset the SMC two-way and the NVRAM and does not always help. I also tried to make the miracle of the network solution, but it doesn't even have a wifi network option. Please help, I need to use my laptop for school work on very bad Internet.

  A few things to try...

  http://osxdaily.com/2015/10/16/fix-Wi-Fi-problems-Mac-OS-x-El-Capitan/

• Why my MBA don't reconnect to WiFi after sleep?

  So whenever I put my Mac to sleep (the lid), it refuses to connect to my WiFi at home.

  I have try the diagnostic assistant, who tells me that I need to reset my router. I know that this is not the case since I'm logged in on other devices.

  I did a little research and am looking for a solution that doesn't require me erase all previous WiFi access points.

  Anyone know anything?

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

  1. If possible, test at another network, such as a public access point or hotspot created by a mobile phone. Some Wi - Fi routers are not fully compatible with Apple devices. More specifically, the security mode for the network, as shown in the network preferences window, should be 2 personal WPA or WPA 2 Enterprise. If the router doesn't support either of these modes, it should be replaced with another.

  2. make sure that the network is on the list of favorites by following these instructions. It is important to read the article, as it is the starting point for further efforts to solve the problem. If you skip any step, the problem cannot be resolved. Make sure that the box marked

  Remember this computer has joined the network

  is checked.

  3 follow the instructions in this article to support.

  4. reset the PRAM.

  5. take note of all your parameters of connection Wi - Fi in the network preferences pane, then remove the connection in the connection list and re-create it with the same settings. This by clicking on the icon of the lowest sign from the list of connection, select Wi - Fi as the interface in the form that opens. Select join the other network in the network name menu, then select your network. Enter the password when you are prompted, and then save it in the keychain.

  6. in the menu location at the top of the network preferences window, select Edit locations. A sheet will fall. Click on the plus sign to create a new location. Give it the name of your choice. In the new location, set up the Wi - Fi service with the same settings that you used before. Click on apply and test.

  7. run the Keychain Access application. Find and remove all the network password AirPort elements that refer to the network. Make a note of the password first.

  8 turn off the Bluetoothand the test.

  9. reset the system management controller.

  10. This step should not be necessary, but he has been advised by the Apple Support in some cases, apparently as a solution for a bug. Open the energy saving pane in system preferences. If necessary, click the lock icon in the lower left corner to unlock the settings. When prompted, enter your administrator login password.

  Select the Power Adapter tab and uncheck the boxes marked

  Continued access to the Wi - Fi network

  and

  Enable the NAP...

  If it is present. Then, if the computer is a MacBook, select the stack tab and uncheck the box

  Enable the NAP...

  11. reinstall OS X.

• ProBook 470: ProBook 470 poor WiFi after upgrade to Windows 10

  Hi all

  There are so many issues report on WiFi on Windows 10 problems, but I'm not really mine.

  I'm running the ProBook HP 470 with WiFi Atheros 9000 series card. It worked fine with Windows 7 Professional 64 bit.

  A couple of weeks, I decided to upgrade to Windows 10. Everything works fine, except the WiFi. I can connect to the WLAN and network speed and the signal strength is perfect, but after a while (minutes or even hours), he falls abruptly to the bottom and my router WLAN even States disconnected, but he'll fix itself after a while. I can force the "self-repair-speed" of disabling and enabling WiFi again.

  But, this is no good solution, WiFi has to work reliable all the time when not moving and it work perfectly with Windows 7. I was hoping that Microsoft and hardware vendors manage drivers after one year of version 10 of Windows, but seems not to be the case.

  I have already installed the latest driver for HP download site, but it is already a year old, and it was the same thing as Windows / Microsoft has done while Windows Upgrade. Therefore no change to be expected.

  Before that I go down again to Windows 7, what can I do? There are a few other pilots who could interfere with WLAN and might not be updated? (More of the WLAN driver I don't have other day manually because I count for the Windows upgrade process.)

  Volker

  The laptop is to date, according to the release of Windows 10.

  Anyway, it doesn't work well, that's why I decided to downgrade to Windows 7. Now it works again as it is supposed to.