S12 Bluetooth not working after system recovery

Similar Questions

• Fingerprinting and display does not work after the recovery of the system (Pavilion dv7 4080us)

  Hello.

  This weekend I decided to do a restore of the system on my Pavilion dv7 4080us (LW170UAR), as I have done several times previously, using the built-in HP and the recovery etc. partition manager.

  Operating system is Windows 7 Home Premium 64-bit, and everything worked OK with the new facility, with the exception of two things:

  • I don't see my AMD display driver listed on device listing Manager. Only 'Intel HD Graphics Family' is listed under graphics cards. I tried to download the drivers from the support page, but it doesn't help.
  • The fingerprint reader does not work. I tried to uninstall the drivers and software several times, rebooting and everything else I've seen that suggestions on these forums, with the files found on the support page of my laptop. No luck yet.

  I would appreciate any kind of help. Thank you!

  Excellent!  I am happy that you now have the correct drivers installed.

• Satellite L350D - WLAN does not work after the recovery disk

  Hello

  I just got a L350D. I ran the tool recovery disk, without any other program running. It is on a good way to end the second disc and that: BAM! blue screen. Since start-up, my LAN and WLAN does not work.

  He always says ' WLAN 2.0 bg adapter "to which no driver is found. The driver is a Realtek WLAN and LAN.

  Don't you think that the crash of the WLAN and LAN module fails?

  I tried the things:

  System reset
  Reinstalling the driver

  but nothing has worked.

  Someone at - it advice?

  Thank you very much!

  Mycale

  Hello!

  I put t know what is the reason for this BSOD when installing, but you can post the BSOD code? For example, you can search based on Microsoft Knowledge for this code.

  In addition, I would try to update the BIOS of your laptop that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After you have updated the BIOS to try to update the WLAN and LAN card driver, or try to reinstall Windows using the Toshiba recovery disc.

  Good bye

• Qosmio F10 does not work after the recovery procedure

  Hi, I just bought the toshiba recovery dvd for my qosmio laptop f10, I put the dvd in and it goes through the process of recovery and complete 100% he then told me to remove the dvd, and then press CTRL ALT DELETE to restart the computer.

  In doing so, he gets to the screen were it tells me windows startup and then the screen turns white and flickers a couple of times, and then the computer phone re boots and don't stop doing that, I press the F8 key when it restarts to go save mode, but when it starts in mode it tells me that windows is not completely set and goes no further and tells me that I need to run put in place to new.

  I don't have a windows cd only toshiba dvd that should put my laptop back to factory settings.

  Can aynone help me before I have sound toshiba?

  Thank you.

  Hello

  It's not easy to say why it happens. Usually, the Toshiba Recovery CD should work properly and after any recovery procedure, the laptop should run without any problems.
  You suggested that you ordered this CD from recovery of the ASP.
  Do you have the right recovery CD? Check the description of CD.

  The other possibility is that the device has a hardware failure. In this case, you must contact the service of Toshiba. Sorry, but that's all I can suggest.

  concerning

• RESULTS OF THE PRINTER ARE NOT READABLE AFTER SYSTEM RECOVERY

  HP Pavilion p6740f desktop computer. Windows 7 Home Premium 64-bit.

  PhotoSmart HP 6510

  After a system recovery recent everything works, except the printer does print to look like giberash.  Here's a sample:

  HN #$ () (1 + 29LYI

  Although the documents look good on the monitor, they print it.  It doesn't matter if the document is on Wordpad, Notepad, Word or PDF.

  Please tell me what is the problem, Joe

  I just use a program called REIMAGE to repair the files.  It worked very well, found the bad files and delete them and replaced the files with the new ones.  The printer works fine now.  REIMAGE is a great program!

• computer does not start after system recovery

  Hello, I so got a bad virus on my laptop acer ms2253 so I reinstalled the operating system using the recovery partition. but now it turns on, only the battery indicator flashes. I reseed memory live, hard disk and dvd player and it won't always turn. I have also taken the battery and tried to turn it on, all nothing happens.

  Hello, I so got a bad virus on my laptop acer ms2253 so I reinstalled the operating system using the recovery partition. but now it turns on, only the battery indicator flashes. I reseed memory live, hard disk and dvd player and it won't always turn. I have also taken the battery and tried to turn it on, all nothing happens.

  Hey fluffytuzki

  If you experience any problems during or after the use of the acer recovery partition, you will need to contact acer directly

  It's their recovery process not microsofts

  http://support.Acer.com/us/en/default.aspx

  Walter, the time zone traveller

• Satellite A100-011 - Bluetooth not working after installing Windows 7

  Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

  I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

  Let me add that the WiFi is working normally.

  Hey,.

  I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

  Check Toshiba Bluetooth portal for the latest versions:
  http://APS2.toshiba-tro.de/Bluetooth/

• Bluetooth not working after installing XP on Satellite P100-286

  I have a P100-286, which has bluetooth laptop.
  It worked fine earlier. I used it with my cell phone.

  I have re-installed Windows XP SP2 and I need to use the bluetooth but I can't make it work. I have installed all updates latest BIOS and drivers but still nothing.

  How can I get Windows to recognize the bluetooth? Nothing in the Manager of hardware or control panel for the moment.

  Thanks in advance.

  Hi dan

  I found another thread that you created on the same subject.
  I think you should follow the first thread and shouldn't t divided the whole discussion in two different messages:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=34785&TSTART=0

• Cannot install Office97pro after system recovery using windows XP. System does not seem to recognize the drive.

  After system recovery cannot reinstall dvd office97pro. It seems that windows XP does not recognize the program on the disk.  Tested the dvd on my computer laptop windows 7, charges fine. Help!

  Hi Fred Chandler,.

  1. What happens when you insert the DVD in the drive?
  2. You receive an error message?
  3. You are able to use the other DVDs on the computer?
  4. Do you have any third-party DVD burning software installed on the computer?

  If you are facing a similar problem with all DVDs on the computer, refer to the article below and then try the steps mentioned, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you face this problem with the Office 97 DVD then I would suggest that you post your request in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum

• Automatic updates do not work after the repair of the windows XP operating system

  automatic updates of Windows do not work after the repair of the operating system

  Hello

  What exactly is the error message? Updates download? Are they trying to install but do not?

  Here are some common steps that you can take to solve the problem:

  http://support.Microsoft.com/kb/883614

• Bluetooth not working not not after installing the drivers for bluetooth in windows 8.

  My Bluetooth was working after I upgraded to windows 7 to windows 8, but only shows not in the settings of computer laptop Panel only Wifi showed but blutooth worked. After I installed my bluetooth driver, I'm not able to use wifi only. I did start methods in minimum mode and uninstalling the driver and reinstalling the windows 8 OS. Plese help fast...

  Hi Agastya,

  Thank you for the update on the question and sorry for a delayed response.

  This problem can occur if the drivers already installed for the device are corrupt. To resolve this problem, you will need to completely uninstall the driver/device and then reinstall it.

  Please, try the steps to uninstall the Bluetooth device from Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand Bluetooth Radios and other devices .
  • Find the Bluetooth device Driver.
  • Bluetooth device driver right-click and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Bluetooth device Driver.
  • Right-click Bluetooth device driver , and then select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the Bluetooth device on the website of the manufacturer or on the CD that you received from the manufacturer,.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• LR - CC does not work after installation with creative cloud. I run a W7 64-bit system

  Hello

  LR - CC does not work after installation with creative cloud. I run a W7 64-bit system.

  I got LR 5.7 running and is not installed by the CC.

  What to do

  Thank you.

  Hi Ridder,

  Please visit the solutions proposed in the following article.

  Lightroom does not launch or closes automatically after the splash screen

  I hope this helps.

  Kind regards

  Sumit Singh

• Satellite U400-17Y - Bluetooth does not work after upgrade to win 10

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "Error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

• Windows Update and System Restore does not work after that the virus

  I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

  Hi TedDanson,

  1. do you get an error message when you try to run the restore system or Windows updates?

  I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

  Microsoft safety scanner

  I hope this helps.

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!