S3-391 selective startup mode

Similar Questions

• Computer is stuck in selective startup mode

  My computer is stuck in selective startup mode. I had a problem of reinstallation of office 2010 after a fraudulent copy was downloaded by crooks who hijacked me for a secure Ms page and took me for $ 50 is not the problem. I have a MS software warranty, so I had a technician help me with office and got it works, but I'm stuck in this restricted mode and need help to return to the normal mode. Bootrec/ect... did not work it says no found windows system or corrupt files load all the drivers which is not available in selective mode. Please help as this is getting frustrating that I can't work with the applications minimum programs ect... If nobody answered, then this guarantee will be useful ;)

  Original title: the System Configuration

  Hello

  Long term, that could actually be better... Especially after the publication of office...

  You will lose all your programs except those provided with windows...

  You cannot save those install you, but remember to back up all your important data and other things...

  Just in case...

  You could study later get an imaging program that you are running from a CD...

  Make an Image to an external HARD disk... If something happens then windows, simply reload the image and make it like new... MUCH easier then reinstall...

• Win 7 msconfig will not remain in normal startup mode when selected.

  What would cause msconfig to normal startup mode when selected? He returned to the selective mode when you try to return to the normal node.

  Thank you, Doug

  We have reloaded OS to fix the problem.

  Thank you, Doug

• Configuration of the system "access denied" Error Message When change of selective startup to Normal startup

  I tried to get my XP to start without using the XP CD. I changed my system Config of selective startup to Normal startup, but I get the following message:

  "ACCESS DENIED ERROR WAS RETURNED WHILE ATTEMPTING TO CHANGE A SERVICE. YOU MAY NEED TO LOG ON USING AN ADMINISTRATOR ACCOUNT TO MAKE THE SPECIFIED CHANGES. »

  How, where and what is my administrator account. I'm the only one using this pc. What is my normal name & passowrd normal or what?

  Thank you

  Thomas

  Thomas,

  Follow the step on the next page to start the computer in Mode safe.
  Start the computer in Mode safe
  Once you start the computer Safe Mode, the built-in "Administrator" account should appear. I'm not saying that your user account is not an administrator account, but just to be sure to use the one built for all purposes it may serve you.
  
  See you soon ~!

• Impossible to retart Window XP as an administrator with the same "selective startup" newspaper (with some third party being disabled services) with an administrator account.

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  Repair facility and get rid of Norton once you are able to get into your computer again.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• I rebooted my machine yesterday and now when it comes to the screen with the scroll bar it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.

  I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop.  Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode.  Startup Repair is unable to repair.  She argues that the onus of a BadPatch.

  Startup Repair shows the following:

  Problem event name: StartupRepairV2
  Signature of the problem 01: external Media
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:262148 problem
  Signature of the problem 05: BadPatch
  Signature of the 06 problem: BadPatch
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Hello

  I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
  remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
  not tighten, effectively remove and replace them with care.

  Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.

  By manufacturer diagnostic utilities
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  ----------------------------------------------

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  No new chances.
  Rob - bicycle - Mark Twain said it is good.

• I tried to update to service pack 2, the power went out during the reboot, and now my computer goes directly into the startup mode

  Whenever I start my computer, it goes right to the repair/startup mode. Windows Vista. I really need my computer back! ANY HELP! I've tried safe mode, reboot, almost everything I know! :/

  Hello AthanasiusGeorgy,

  Thanks for your post.  Try to contact the manufacturer of your system to see if you can get a recovery for your computer disk.

  See you soon

• When we turn the or after mode 'sleep' my motherboard will load but then nothing else... White screen. If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  When I turn on my PC or after mode 'sleep' my motherboard will load but then nothing else... White screen.  If I reboot and select Safe mode it loads. If I reboot in safe mode then everything works. Windows loads, everything works.

  I have this pc for 3 years.  My system was full of unused and unwanted programs, so I rebooted to Vista, deletted all my old files that Vista had moved into the "old." This is when I started having this disorder.

  (I made this process more yet to see if it would help with no luck)

  My first thoughts were video driver... downloaded the new drivers 3 times.  scanned all the other drivers for updates ect. nothing seems to help...

  Anyone have any ideas?

  Thank you

  Dave

  I have

  I was able to download these files.  Rthl64.sys point - one component of your network cable in pictures device driver memory.  Interestingly, the dates of the 2006 pilot (Rtlh64.sys my Sep 26 07:20:23 2006 (45190CF7)), so it's most likely your problem.  Follow these steps:

  -Download a new copy of the software/drivers on the website of Realtek here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=7&PFid=10&Level=3&Conn=2

  -Uninstall the current software/drivers on your system

  -Install the newly downloaded drivers

  -Monitor for more BSOD

  Here is a summary of the BSOD:

  BSOD BUGCHECK SUMMARY

  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 16:23:07.947 Sun 31 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 13:18:38.380
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03de3a30 fffffa80 '05bf1050 fffffa80' 072dc010
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6002.18267.amd64fre.vistasp2_gdr.100608 - 0458
  The debugging session: 22:49:49.007 sat 30 Oct 2010 (UTC - 05:00)
  System Uptime: 0 days 5:12:31.440
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03def060 fffffa80 '05bdf050 fffffa80' 04aeb2d0
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  By: 6001.18000.amd64fre.longhorn_rtm.080118 - 1840
  The debugging session: 21:48:58.144 Wed Oct 27 2010 (UTC - 05:00)
  System Uptime: 0 days 9:49:32.487
  WARNING: Unable to verify timestamp for Rtlh64.sys
  ERROR: Module load completed but symbols can be loaded for Rtlh64.sys
  Probably caused by: Rtlh64.sys
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  BUGCHECK_STR: 0X9F
  Nom_processus: System
  Code 0000009F error checking
  Fffffa80 00000000 00000003' arguments'03a1ca30 fffffa80 '05-99050 fffffa80' 039c8c60
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

  -John ( http://www.carrona.org/index.html )

• Whenever I start my computer I am able to get to the loading screen, but the computer reaches the login screen it restarts. This happens all the time. It does not matter what I try to start if no failure or normal startup mode

  This happens all the time. It does not matter what I try to start if no failure or normal startup mode. I tried to use the repair from the vista cd. It's 64-bit computer with AMD phenom processor and an Asus motherboard there is a HDD 500 GB and 4 GB of memory.

  you have AVG Antivirus?

  If so, these instructions will fix it: http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=94159

  teengeek.freehostingcloud.com

• Payment service returns 'purchase successful' without selecting the mode of payment (in sandbox mode)

  Hello

  I'm testing in-app purchase in my app (BB10). I added my id in sandbox mode. I go through all the messages of payment and without selecting any mode of payment (paypal/credit card), it returns successfully. is this correct behavior?

  There is free of charge with the sandbox test, so flow you state sounds as it should. Direct mode test load actually does more validation would occur before returning a result.

• Beep when starting and past in startup mode

  Hello. I currently have problems associated with the startup mode. When I turn on my laptop, the laptop starts beeping loud and it automatically goes in boot by itself mode.  I, not having as much knowledge about the technology and do not know which of these options to choose from, I just pressed the Esc key and then my laptop automatically goes to the normal start screen and beeps constantly. I did no changes to my laptop and it's bugging me. BTW, my laptop is Lenovo G480 running on Windows 7. Is there a way I can disable this automatic start mode? Please help me.

  NN

  The model of the beeps should help you diagnose the problem.  Sound signals are specific to the computer so when you find the boss go to Lenovo (or Google search of startup beep sense) and check the most likely cause

  Read about it here https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Identifying-BIOS-beeping-BIOS-beeps/ta-p/335421

• Boot Manager Windows problem asit always starts with a selective startup under the Startup tab

  Whenever I start my laptop I get Windows boot manager options in which it highlights the option of windows 7 and I have to press Enter and continue with this option selected.

  I tried to change my boot options in msconfig, but once again the configuration back to selective Starup of Normal startup. Also I disabled some startup applications, but even changes are not get saved when I restart the system after changes. My touchpad no longer works between the two, and then it starts to work. My left and right keyboard arrows keys do not work.

  My change in normal startup is get back on selective startup.

  Please help me to solve these issues.

  Hello

  It is very possible that this is for the reason that you have corrupted files on your system. System File Checker will scan your system for the missing, corrupt or damaged files. In addition, it will try to correct them. If you have changed the important system files, System File Checker will be - make sure you make backups of them!

  How to run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  I would also recommend that you run the Startup Repair to the problems that Windows may be displayed when you start your computer.

  How to run the Startup Repair tool

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/Startup-Repair

  Thank you

  Legaede

• "Enable protected at Startup Mode" to stop printing on RightFax

  I use a printer to print on RightFax.  It uses a separate print processor to direct the output to the printer on the Client RightFax.  As long as I use RFPrint.dll to print processor, AdobeReader 11.1 will not work with a printer using the custom print processor.  The only way around this is to uncheck "Enable protected at Startup Mode".  Is there a way to tell Adobe reader that this printer or the print processor is allowed to print?

  Please after whitelisting the path (c:\ProgramData\Roaming\\SpoolJob) using custom policies.

  http://www.Adobe.com/devnet-docs/acrobatetk/tools/AppSec/ProtectedMode.html#policy-CONFIGU ration

• why I can't get my computer works on the normall startup mode

  When I restart the computer and click to throw the normall mode it stays on the safe mode!

  Hello

  1. What is the operating system installed on your computer?
  2. don't you make changes to the computer before the show?

  Please follow the steps mentioned below.

  a. click the Start button.
  (b) in the search box, type msconfig and press to enter.
  c. Select the Startup tab.
  d. under Startup options, turn off safe mode
  e. click OK and apply.

  Restart the computer and verify if you can boot normally.