Safari causes freezing requiring a hard restart

Similar Questions

• Firefix 23.0.1 freezes requiring a hard reboot the computer.

  I'm running a machine oldest, but with a new installation of Windows 7. Until the last update, I have not had any problems with versions of Firefox since my last OS install. Now, when I'm in the latest Firefox 23.0.1, I sometimes get gel that blocks the whole machine and need a hard reboot. I'm always diagnose, but so far the only constant I know is Firefox. I have not experienced the same freezes using IE.

  Sometimes I think that freezing that happens when I lose control of the keyboard or the mouse during a session of Firefox, but after 1-2 seconds, they both return. Usually, it just freezes. Most of the time, it so happens that I'm away from the keyboard get coffee or something. It is so transparent, the only thing that tells me that the gel is produced (other than the loss of the mouse and keyboard) is the time of the system is still a few minutes ago.

  I saw the other message forum for Firefox 21 and 22 of Firefox, but I thought I have ask in a new message on Firefox 23.

  I did the reset for Firefox from last night. I rebooted Ghostery as my only add-on, which was the only consecutive add-on over the previous versions of Firefox. Already this morning, I had the 1-2 second pause, but not yet freezing. (Now the convenience store has been added because of this message.)

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• The CPU usage reaches 100% and the system locks requiring a hard restart on Windows Vista

  All of sudden the CPU usage reaches 100%, which makes the system dead slow and finally the system stops responding. I have to do a hard reboot to continue using the system.

  I tried to open the Task Manager to see if there are programs or services running that can consume resources and found nothing. The remains of number of CPU use, the graph to use but less than 10 years is hovering at 100%.

  I did not change my system.

  The problem appears on the two accounts that I installed on my operating system.

  I removed all the unwanted programs since the system was started.

  I have McAfee Antivirus installed for more than a year now, and the latest antivirus patches have been installed.

  Help, please.

  Thank you in advance!

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Something Apple regarding 10.11.4 gel and requiring a hard reboot?  I had several incidents since the upgrade (supposedly) gel to 10.11.4

  I'm having a problem with my Pro MacBrook retina (end of 2013).  Since the upgrade is supposed to 10.11.4, I eperienced several system freezes; all

  that required a hard reboot.  The machine is Core i7 to 2.3 gHz, 16 GB 1600 mHz DDR3 ram, 512 GB ssd.  Safari v.9 (1).  It is obvious that the other users are

  having the same experience - any word from Apple regarding a solution?  I expect this kind of thing from Windows, not Mac machine...

  There is no systemic problem with 10.11.4 gel. Where are you this information? If you get it from forums like this one do not forget that the few people who post here post about issues they know. Their messages do not represent millions of people, not problems.

  A lot of questions like yours goes back to 3rd party apps incompatible or drivers that have not been updated for 10.11.4. Provide details of your question and we will try to help you.

• iOS 9.3 - Safari/Mail freezes after clicking links on iPhone 6s

  Hello

  Never had any problems with my iPhone 6. Just upgraded to iOS 9.3 without any problem. After the upgrade, I can't click on links when you search something on Google in Safari or by clicking on a link in the E-mail, the apps just freeze.

  I tried to wipe data/cache of Safari history, close all applications and restart the phone (ordinary and now the two key power-house), by disabling form of all sorts of settings settings of Safari, but no luck... Anyone with an idea how to sort?

  I have the same problem with Safari, mail and messages. The links work with the app gmail links work in Chrome, but only with a long click to get the option to open in a new tab. It seems that this already happened with 9.2.1 but I couldn't find an answer that solved the problem. I don't think that has begun until 24 hours after the update. iPhone 6 s + 128 GB 9.3.

• Internet Explore screen becomes milky and occasionally freezes forcing me to restart the computer

  Original title: freezes

  Internet Explore screen becomes milky and occasionally freezes forcing me to restart the computer.  now the Bureau is milky and freezes from time to time.  whenever the circle of 'thought' continues to 'think' without success.  Sometimes it fades, but most of the time I have to stop and restart.

  Hello

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  Try to start in safe mode and check if you are able to stop normally. To start in safe mode follow the link given below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2:

  If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Method 2:

  Also, try to optimize the performance of Windows 7. Follow the link below which evokes the different ways to optimize the operating system.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• temporarily, the computer freezes and buzzes then restarts then simultaneously using spider solitaire and play itunes worked fine util is about 2 weeks.

  Fix a computer temporarily freezes and buzzes, then restarts when simultaneously using spider solitaire and playing itunes worked fine util is about 2 weeks. Dell vostro, windows 7, office 10, itunes 10.6.3

  Help!

  Hello

  1 done only if you use iTunes and solitaire spider together?

  2 have you made any changes to the computer before the show?

  Method 1: Uninstall and reinstall ITunes and see if this is useful:

   

  Reference:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Method 2:  Put the computer in a clean boot state and see if that helps.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 3: Restore the computer to a date when it was working fine before.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Safari windows/tabs closure after computer restart

  Before all the tabs in Safari would remain open (even after restarting the computer) until I have to stop them, which was a feature I really enjoyed. As of today, it closes after every stop, and I don't know why. I made the Version 10.10.5 security update and update of Safari Version 9.1, cleared cookies and history, and nothing seems to fix. Any ideas would be greatly appreciated!

  Safari-> Preferences-> general is the "Safari opens with:" pull down together to 'all windows from last session "?

  

• E-mail & Safari are freezing / crashing when I arrived at links.  When is this corrected?

  E-mail & Safari are freezing / crashing when I arrived at links.  When is this corrected?

  We do not know. As far as we know is that apple is working on it.

  For now, here is a list of the workarounds that have worked for some:

  Re: Links, Hanging Apps: an overview of solutions

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• HP 600-1350 PC: erronious warning message that is causing me to have to restart without reason

  AT & T has had a wide spead failure last week that caused an interruption of 27 hours of my Uverse cable - int. - phone. After this event, which started my Hp 600-3550 PC, he displayed a warning message stating basically that I had a defective Ethernet cable connected to my all-in-one wireless Desk Top. This message is not until I left my CV go quiet for an hour or two. When I go back and press the space bar to continue... There is the warning, causing me to have to restart. I ran my diagnosis/Hp recovery disk and it reports all is well except anything to do with the 3D which I never use. I say the message is erronious is because there is no no. Ethernet cable going into my desk Top. Only a printer - Scanner (usb) and antenna (co - ax) broadcast (for cable outages) and of course the power cord.

  Any suggestions on how to get rid of the warning of Billboard?  Oh! Of course, there is the Ethernet cable from the ATT case on the side of my house... in the House and my wireless modem.

  maneman

  Comments and ideas

  You can restart all - everything connected to the AT & T bits and which includes the Modem and your box AT & T U-Verse, too, if you can't stand to do.  The problem with the U-Verse stuff is that he doesn't like outages of electricity and stuff tends to miss a bit catastrophic subsequently.  I realize your computer and your printer are not connected to the U-Verse box is said by the way.  The smile.

  When you shut it down, wait a few minutes - say about three minutes.

  Things U-Verse, modem - box, then you started home router if you have a separate system... Then the computer.  Finally, assuming that the computer starts and allows you to start the printer.

  If you have one of your own cables connecting all to nothing, consider replacing them.

  ---------------------------------------------------------------------------------------------

  You must make sure that your file system is healthy.  Look for other problems in the system.

  Take a look at the following - and really watch the suggestions, take appropriate action:

  Improving the performance of the system without adding memory (Windows 7)

  ===============================================================

  If errors not stop, call U-Verse and complain until get you your hands on an agent who will tell you to send a tech level second (not a student) and see what happens.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Crash - screen goes blank white, or clear & requires power to restart.

  Original title : Windows Vista crashes?

  I have a Dell Inspiron 1501 running Vista with SP2, IE9, on a local network using a D-Link wireless router.  Crash - screen goes blank white, or clear & requires power to restart.  Not particularly at some point, everything seems to happen.  The msconfig poster system log event viewer critical errors at the time of the accident - the event log source indicates "plateau of WLAN, & R300? Also just today a new - source of journal of the events 'DistributedCOM' & 'Application Hang. So, whats happening & what to do?

  Hello

  ·         You get the error message?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  Follow these steps and check if that helps.

  Step 1:

  I suggest to start the computer in Safe Mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

   

  Step 2:

  You may also start your machine in a clean boot State to rule out the involvement of a third party software conflict.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

  Method 2:

  Follow the form of measures troubleshooting article and check if that helps.

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Method 3:

  I suggest to optimize windows and check if the problem still persists.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Method 4:

  I also suggest you to improve the graphics and motherboard chipset and drivers on the manufacturer's Web site and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• computer keeps freezing. When I restart, it checks for consistency.

  original title: computer keeps freezing. When I restart, it checks for consistency. who is wrong?

  my computer keeps freezing all the time. When I turn it off and turn it back on I get tell screen

  audit system C type NTFS file system for consistency

  CHKDSK checking files and index

  She then removes and retrieves a number of files. also every now and them my computer just stops saying its to protect my computer.

  can someone help and tell me what is the problem and how can I solve this problem?

  Here is the correct information on how to set your computer to another date and time.

  The other poster told you how to make a backup of files!

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Adding RAM causes freeze or blue screen. RAM works well with Win XP

  I upgraded from Win XP to Win 7.  I had problems with the installation so I removed all non-essential equipment and was able to complete the installation.  When I add more RAM, I had emoved (two DIMMs of 512 MB) to the current 1 GB DIMM, Win 7 either freezes or I get a blue screen after boot up (it does not boot up to the desktop computer).  Even RAM works very well with my old XP OS (I did a disk clone before moving to Win 7).  The card motherboard BIOS is up to date (according to eSupport) and DIMMs are the same characteristics (a 1 GB DIMM and two 512 MB DIMMS for a total of 2 GB).  Windows 7 works very well with just the 1 GB DIMM in memory 1 of 3 location, but any combination of causes freeze or blue screen.  Is there something on the way Windows 7 manages RAM which is causing the problem?  If so, is there something I can do to solve the problem?

  try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
  confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
  http://www.memtest.org/

• Safari stops everything requires hard restart

  Safari on late 2009 iMac after works very well for some time, unexpectedly brings all of a sudden stop. The cursor moves, but clicking on does nothing. Keyboard does not work so force quitting is not accessible. Ideas?

  Hi Robert,.

  Thank you for using communities Support from Apple. Sorry to hear that you are having these problems with your iMac. I'm a little unclear on the exact nature of the issue you describe (how many times it happens, if there is some kind of trigger, etc.), but if the freezing of the whole system seems to be linked to Safari, you can try to reproduce the problem under a test user to see if it happens again. You can find information and troubleshooting procedures described in the following article useful:
  

  How to test a question in another account on your Mac - Apple Support

  You can also see if what you are experiencing is a question of depletion of resources (memory/RAM pressure, high utilization of the processor, available disk space, etc.). If so, then this article can also be useful:

  Use the monitor activity on your Mac - Apple Support

  Kind regards.