Sam 2710XDVD, memory upgrade problems

Similar Questions

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• Veriton M498G memory upgrade problem

  I'm trying to age 5 years Veriton M498G memory upgrade my son of 4 GB to 12 GB now when I upgaded to Windows 7 64 bit.

  The original 2 GB key still works fine and the 2 GB key that I added back a bit works very well too (4 GB total).

  But when I remove all the sticks and put in a new 4 GB stick the computer crashes in the POST just after the BIO 1024Mo of RAM (!). Looks like that the BIOS does not like the 4 GB stick! Compensation of the BIOS did not help.

  Back original memory makes the computer works perfectly.

  I am well aware of the memory manufacturer/type compatibility issues.

  I tried 4 different memory of 4 GB sticks from 2 different sources with no luck.

  My questions are:

  1. the Veriton M498G motherboard or BIOS has any limitation on the size of the memory card?

  2 I missed a setup or configuration to let the BIOS see the 4 GB memery stick?

  3. a more recent BIOS help? (the computer uses the original BIOS from 2011)

  4. is there a solution runs the endless trial and error of purchase and return of USB keys?

  The system is:

  Acer Veriton M498G

  Processor: Intel i3

  S/N: PSVAQ03005 *.

  MFG date: 18/01/2001

  Thanks for your help.

  Michaud

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to all names, email addresses, telephone numbers, full of serial numbers, etc.]

  Hello

  The crucial memory modules too.

• X201i 8 GB memory upgrade problem

  I want to update my RAM X201i 2 x 4 GB. I tried second pair of memory chips, but I always get the same result: memory is recognized in the BIOS, memtest86 falls down after a few seconds and restarts and boot OS also fails.

  I tried without success after fleas:

  • Kingston SO-DIMM 8 GB KIT DDR3 1333 MHz CL9 (2 x 4 GB)
  • 2 x Crucial SO-DIMM 4 GB DDR3 1600 MHz CL11

  Faster Crucial chip theoretically should slow down at the required speed, but it has apparently not so. Lenovo memory compatibility info for X201i explicitly suggest PC3-10600 DDR3-1333.

  What could be wrong? Can someone show its configuration of 8 GB?

  
  

• Satellite A105-S2051 memory upgrade problems

  Sorry for the huge block of text...

  This is not my computer, but a problem I need to fix nonetheless.
  I use a Toshiba A105-S2051 and I want to upgrade memory.

  When I have the original 512 and a 1024, it works perfectly, and I can move them to a port without problem.
  I also have a PNY 1024 that I can replace the other 1024 with and it works perfectly even in the two ports, but when I put the two 1024, it does not work (starts and stops quickly and repeatedly).

  Similarly, even if I let one of the 1024 in but remove the 512, computer does the same thing.

  Is the computer laptop for any reason + need + 512 to work?
  This is no logical sense in the PC world, but I have no idea on laptops...

  Hello

  Just a question: last chart shows an empty slot.
  Can you please check if the laptop works with all modules placed in this slot machine only?

• HP Pavilion G6 memory upgrade problems

  How to remove the cover on the memory on hp Pavilion g6 to add memory?  the screws do not seem to want to go out completely, and I hesitate to raise too hard for fear of breaking the plastic.

  Hello:

  Looks like the G7 has the same problem.

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/how-to-remove-cover-over-RAM-compartment-on-a-Pavillion-G7/TD-p/1246039

  Appears to just carefully lift by finding where the tabs are.

  Read your owner's manual. Chapter 4, page 44 shows how to remove the cover. It seems to be in the same way as in the G7 countries.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02968637/c02968637.PDF

  Be careful and good luck.

  Paul

• Inspiron 15R 5520 Memory Upgrade problem

  I have upgraded my laptop from 4GB to 12GB (4+8). After the upgrade, the laptop boots and runs very very slowly.My laptop came with 4GB ram 1600 single stick. I upgraded the RAM by adding another stick of 8GB same bus and same manufacturer. The BIOS shows the total memory as 2288MB instead of 12288MB. Windows detects total RAM of 12GB but boots and runs very slowly.
  
  I have updated the BIOS from A06 to A07 trying to resolve the problem but with no luck.
  
  When installing each RAM stick alone (4gb or 8gb), everything works fine, but the issue comes back again when both sticks are mounted together even when switching the places on the sockets.
  
  Looking for your kind support!
  

  The problem is solved after that last update A11 BIOS

• Vostro 3300 memory upgrade problems

  Two Vostro 3300 comes with 4 GB (2x2gb v1.5).
  Attempt to upgrade to 8 GB, so far without success.
  Most recent Bios A12

  Selector memory from crucial.com claims 4 GB DDR3 - 12800 CL11 1.35v

  I tried three products G-Skill and Samsung, with identical results:

  (1) F3-1600C9D-8GBSL G-Skill (PC3-12800, CL9, 1.35v)

  (2) G-Skill F3-12800CL9D-8GBSQ (PC3-12800, CL9, 1.5V)

  (3) Samsung 4 GB 1Rx8 PC3L 12800 S-11-13-B4

  No start normally, either as a single device, or in combination with existing memory (at the same voltage). All devices are recognized in the BIOS (as in 1066 MHz). After the splash screen of the BIOS, attempts to result in video starting Windows of interlocked block repeated altered in system and model freezes.

  F5 MASTS fails with graphics corrupted after several minutes. System is not responding.
  Memtest 86 + fails almost immediately (permanent or not) with a splash of black character cells

  These characteristics seem to be compatible, but do not work.
  Suggestions of compatibility (ideally based on real experience) would be appreciated.

  The problem is simply that the Vostro 3300 (and probably 3400) require low-density parts, and all samples tested were pieces of high density.

  The distinction of high-density/low-density is not explicitly stated in any literature I can find.

  For critical parts at least, the two latest les deux derniers chiffres figures product code indicates the density.

  For example, CT51264BF160BJ is a high density of part (BJ ends), while CT51264BF160B is a part of low density (ends in B). It seems that G-Skill and many others can use parts of high densities.

• Satellite A660 - 11 M - Memory Upgrade - problem

  Hello world!

  I'm having a problem with upgrading my RAm 4 GB to 8 GB memory ([link crucial 8 GB Kit | http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=28543EEAA5CA7304]) which should be compatible.

  When I turn on the laptop after mounting of the modules to all first all seem to be right and the Bios start, but then it will not load windows and stucks on a black screen.

  Could someone help?

  Thank you!

  Hello

  What to say: it looks like it s a problem with new RAM modules.
  The RAM modules aren t fully compatible or they malfunction.
  You must use other modules I made good experiences with modules from Kingston.

• HP Envy 850-065SE: memory upgrade problem

  HP computer: Envy 850-065SE (memory 4 locations)

  Memory: G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 2 * 16GB

  I just bought 32 GB (2 * 16) G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 memory to upgrade my HP desktop computer (model 850-065SE of envy). My office has a HP mother 2B3A and i7 - 5820 k and HaswellE chipset. The memory of the plant is of Samsung brand with configuration DDR4-2133.

  When I replaced the memory of samsung (trademark) with G.SKILL ones, the computer cannot start with black screen. When I've switched back to factory memory, the computer is back to normal.

  That means G.SKILL RIPJAWS V 16 GB memoryis is not compatible with this HP computer motherboard? or upgrade the BIOS can solve this problem? or do I return these memory and get 8 GB * 2 instead? Your comments are much appreciated.

  This model is limited to only 4 GB and 8 GB modules in the slot.

  B21 HP

  CL15 - DIMMs, 4 GB, PC4-17000, 798033-001, DDR4 COMPLY_2.07

  CL15 memory - DIMM, 8 GB, PC4-17000, 798034-001, DDR4 COMPLY_2.07

  You can buy online modules of 8GB.  Look at the technical on this point.

  https://www.CDW.com/shop/products/Kingston-DDR4-8-GB-DIMM-288-pin/3912220.aspx#Po

• Satellite L10-117 and memory upgrade problem.

  I installed the module of ram kingston 512 MB dedicated for my laptop and my system does not start. Laptop does not see its partition with windows. I tried to salvage the dvd system and he does ' t help. Recovery is going ok but after restart problem is the same. I also tried to install this memory module 256 MB (factory installed), and then my black LCD screen and the computer won't shut down. Akku only delete help to extinguish.
  I tried all combinations of this module in the memory 1 and 2 location.
  I use 1.8 BIOS and there I see almost empty memory.

  Hello

  If you start the unit with the original just module becomes so everything ok?

• Satellite C75-A-144 - Kingston memory upgrade problem

  Hello

  I recently bought a laptop C75-A-144 and wanted to do an upgrade with the bar of memory KINGSTON 4 GB (4GB 1600 Mhz DDR3 Non - ECC CL11 SODIMM SRx 8).
  Unfortunately, the laptop does not start with this module installed. I checked the module in the other laptop (differrent manufacturer) and it works well.
  Then... there at - it some compatibility problem with Kingston memory modules and model C75-A-144?

  In addition, because I really want to do this upgrade, can someone give me a list of the modules that will work with this laptop?

  Thanks in advance for your help.

  According to specification for laptop, that your computer can be upgraded up to 32 GB of RAM.
  Compatible RAM modules (verified by Toshiba) followed part numbers:
  2 GB DDR3L-1600-PA5104U-1M2G
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

  Check it please these part numbers and use them to order of RAM.

  In the past I ve used memory modules RAM Kingston for upgrade and there is no problem at all. Maybe you're trying to use Rams with different specifications.

• G62-407DX portable computer memory upgrade problems

  According to the documentation on my laptop, it supports up to 8 GB of DDR3.  It is currently installed with a key 2 GB of Kingston and a 1 GB of DDR3 Micron as it was configured by HP.  I tried to improve it up to 8 GB of memory PNY last night and met with complete failure.

  When starting the BIOS detected that 8 GB of RAM was installed like Windows.  However, Windows indicates that 3,79 GB of RAM was usable and 8GB has been installed.  About 2 months ago, I got this exactly the same problem on a desktop computer.  The question is not in Windows because it is the 64 bit version of Windows 7.  It's actually the BIOS that is to blame.  On my desk, I had to contact the manufacturer to get a new version of the BIOS (the version I needed was not available on their website).  The problem with the BIOS, is that he lacks the feature "remapping memory."  Without the parameter, Windows will not be able to use all of the memory installed in the system.  The BIOS on this laptop seems to have basically all normal BIOS settings deleted, which is strange, but I can understand since it is a laptop and not a desktop computer.

  After having the problem with memory, I checked my BIOS version and went on HP website to see if there was a newer version.  To my surprise, the version in my laptop (F.25) is newer than the version on the website (F.23)!  It seems that all the drivers and utilities on this laptop HP support page are old.

  Can someone help me find a BIOS with memory remapping?  If there isn't one, I hope that HP sees that their BIOS has a problem...

  snike3 wrote:
  

  According to the documentation on my laptop, it supports up to 8 GB of DDR3.  It is currently installed with a key 2 GB of Kingston and a 1 GB of DDR3 Micron as it was configured by HP.  I tried to improve it up to 8 GB of memory PNY last night and met with complete failure.

  When starting the BIOS detected that 8 GB of RAM was installed like Windows.  However, Windows indicates that 3,79 GB of RAM was usable and 8GB has been installed.  About 2 months ago, I got this exactly the same problem on a desktop computer.  The question is not in Windows because it is the 64 bit version of Windows 7.  It's actually the BIOS that is to blame.  On my desk, I had to contact the manufacturer to get a new version of the BIOS (the version I needed was not available on their website).  The problem with the BIOS, is that he lacks the feature "remapping memory."  Without the parameter, Windows will not be able to use all of the memory installed in the system.  The BIOS on this laptop seems to have basically all normal BIOS settings deleted, which is strange, but I can understand since it is a laptop and not a desktop computer.

  After having the problem with memory, I checked my BIOS version and went on HP website to see if there was a newer version.  To my surprise, the version in my laptop (F.25) is newer than the version on the website (F.23)!  It seems that all the drivers and utilities on this laptop HP support page are old.

  Can someone help me find a BIOS with memory remapping?  If there isn't one, I hope that HP sees that their BIOS has a problem...

  Hello snike3,

  Sorry to hear about your memory problems. I came across your post, shortly after the purchase of 8 GB (2x4gb) of new memory for the same model specifications, and I started to worry that I would have problems too. I installed modules and all the 8GB are recognized and usable. I bought the laptop (HP G62-407DX) last week. Running the version of BIOS F.25 with InsydeH20 Setup Utility Rev. 3.5 and Windows 7 Home Premium 64-bit, like you did. The new modules passed the test of the memory configuration utility (I'll run it through something more rigorous later).

  I know that this does not solve your problem and I apologize, but I hope that it provides an overview. Maybe you received a module of memory of buttocks, or it is not fully inserted into the slot of memory? Maybe the PNY memory modules play well with these laptops? If it's any consolation, the memory that I use is model G.SKILL F3-10600CL9D-8GBSQ:

  http://www.Newegg.com/product/product.aspx?item=N82E16820231342

  If possible, you might want to consider RMA'ing your PNY memory and buy memory, that I linked above. He has been working for the last two hours firmly. Please reply/re-post when you have a solution to your situation.

  HTH!

  ~ GGG121

• XW 8400: xw 8400 memory upgrade problems

  I just tried to improve my workstation to 16 GB of ram to 64 GB of ram.  After installing DIMM modules, I restarted and it made a break with a beep to indicate that he had automatically identified change to 64 GB of ram and you are prompted to restart.  After pressing F1 you are prompted, he stopped with a beep and gave me a 'memory 211 Warnining Condition detected'.  I wasn't able to get around that and continue to boot the system, so I replaced the new ram with the old and hope here for more help in this upgrade.  Your help is greatly appreciated.
  "

  Here are required HP part number:

  398709 071

  There are several officials of this HP memory, as you will see if search you on eBay under this number.  I don't recommend the HP memory, because he is put in a cell for features beyond general specifications.  However, you can succeed looking for sticks 8 GB with exactly the same codes that are on the official HP sticks.  I did it.  For the latter, I personally like the Elpida, Nanya, Samsung and Hynix HP ones.

  From the first page in the xw8400, latest QuickSpecs: "up to 32 GB of memory capacity" and the latest QuickSpecs xw8600: 'up to 128 GB of memory capacity.

  Maybe you can get your money based on print the official xw8400 QuickSpecs and prove to the seller that he was wrong.

  Attach a pic: use the insert image icon (it looks like a mountain) on the message... bar have the image on your desktop for easy navigation and use this icon to navigate to it, and then click Insert.  In the this forum messaging system I don't see a way to attach a PDF file, but JPEG images work fine:

  

• Dell Dimension B110: Memory upgrade problem

  I have problems with my upgrade memory. I bought a few 1GBX2 2 GB of memory, and I know that my computer can take because I had done the research before I bought the memory. But with I put memory he doesn't recognize her, it's like id I have no memory what so ever in the machine. I was wondering if there was something that I'm supposed to do or change to get the ram to read. It takes PC-3200 RAM type.

  And another thing... I have 512 MB of RAM, but he acknowledges as 504 MB of RAM... Any reason why it's like that?

  Specifications of the computer:

  Microsoft Windows XP
  Professional
  Version 2002
  Service Pack 3

  Intel [R]
  Celeron (R) CPU 2.53 GHz
  512 MB of RAM