SAM failed to start the TCP/IP or SPX/IPX listening thread

Similar Questions

• Windows search Windows failed to start the service on the Local computer

  OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

  I'm on Windows 7 Professional 64 bit
  UAC is set to the lowest level 2

  The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

  Windows cannot find ': search query = cmd'
  
  I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

  Windows search Windows failed to start the service on the Local computer
  Error 161: the specified path is not valid

  The event log showed me this Application error:

  Cannot initialize the Gatherer service.

  Details:

  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
  

  Help!

  Thanks Samhrutha.
  Your proposed solution of editing the registry is the only solution I found to this day and still work.
  The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

  I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

  Only recently, however, discovered one other cause possible/fix to this problem.
  Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

  To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

  After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

  Hope this helps!

  :)

  ~ rx

• DSC error: IAK_SHARED failed to start the service

  When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service.  I'm using LabVIEW 8.6 with DSC 8.6.  I tried to run one of the examples (the example of the heat exchanger).  Any ideas?  I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC.  Shall 8.5 DSC be uninstalled everything first?

  Thank you

  Tom

  Hi Tom,

  This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.

  Gregory C.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Message to the computer startup «failed to start the audio driver of Dolby.» Please restart your computer or reinstall the driver if the problem persists ".

  Original title - help help help me please

  why I opened my computer it appears a message that "failed to start the audio driver of Dolby. Please restart your computer or reinstall the driver if the problem persists ". and I could not open Windows media player. What should I do now? who can help me please?

  Hello

  Go Device Manager... Sound, video and game controllers, and see if you have triangles yellow error next to your audio devices...

  My guess would be that you need to update the drivers for your audio devices.

  You should be able to find the drivers + Support Web site for your computer model...

  If not, find the number\model Audio chip and watch there chip manufacturers website for updates...

  I don't know if the audio problem is a single chip, or is part of your graphics device...

  If you don't find anything wrong in the audio, you can check that.

• Failed to start the computer over HTTP: Error 1000

  I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment.  However, I get this error on half of my offices.  I tried both 2012R2 and for the administration server 2008R2.  It is installed with local SQL.  Desktop computers are Windows 7, floating pool linked clone.  Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ".  Once virtualization fails is disabled and no appstacks cling.

  I have logs from two desktop computers, a successful failure:

  In case of failure:

  [19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)

  [19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response

  [19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)

  [19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)

  Successful operation:

  [19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)

  [19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?

  If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.

  Maybe you try to join an appstack that has some sort of firewall inside rule?

• FRM-18105: failed to start the help system

  Hello

  I'm in Oracle Forms 11.1.2.0 you try to start the help system and getting the error message below.

  FRM-18105: failed to start the help system.

  I have to check the registry entries or system variables?

  Thank you

  This issue is finally resolved. After I compared the FORMS_BUILDER_CLASSPATH variables in the environment vs registry Variables, I found I was missing C:\Oracle\Middleware\oracle_common\doc\online_help\oracle_forms in the registry. After that I added it it still didn't fix it. Then I found that entry C:\Oracle\Middleware\Oracle_FRHome1\jlib\ewt3.jar was pointing at my old House, so I have fixed to point to Oracle_FRHome instead of Oracle_FRHome1 and my forms launched immediately. Thanks for listening)

• Failed to start the bb4.5 Ubuntu 11.02 64 bit client

  I can't get my client to run. BBOUT said "nohup: cannot run command ' BBHOME/bin/bbrun': no such file or directory".

  I checked that BBHOME is correct.

  I checked the path of nohup is correct.

  BBHOME/bin/bbrun exists and is bbuser:bbuser 755

  Anyone have any ideas?

  do you have defined external scripts in bb-bbexttab? If so, comment out for now and try to start the BB.

  If it works, add an external at the same time until you get the error

  or I just noticed something...

  BBOUT said "nohup: cannot run command ' BBHOME/bin/bbrun': no such file or directory".

  Why the BBHOME/bin/bbrun is the command that fails as in the code?

  WHT is the value of BBHOME top runbb.sh? It must be a directory, not '& BBHOME '. If it's '& BBHOME', you probably doesn't bbconfig/install to install the client.

• Failed to start the test

  I have a hp pavilion g7, Windows 7
  
  Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
  
  The display screen reads-
  Memory test: past
  Smart check: past
  Dst short: failure
  
  Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
  Product ID: A7A44UANBA
  
  Hard drive 1
  
  Starting test: failed
  
  Where should I go here for this problem?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...

  Kind regards

  DP - K

• Failed to start the event viewer. Access is denied

  "Failed to start Event Viewer. Access is denied"message with a red x appears when I click on details of view in the event log in the task: advanced tools

  I am the administrater and the only user, the user account is disabled. I checked the register and complete the keys in Services/Eventlog 6 other tasks open OK, only the event log does not open.

  I have never used this service before, running Vista Business SP2 on a laptop HP Compaq8710p (7 years), all the drivers are up to date, I've checked for viruses and malicious software (Symantec Endpoint and Windows Defender). My HARD drive is only 45% used (55% free), 4 GB of memory.

  Would appreciate some help here

  Thank you

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• R12.2.4 cloning - failed to start the server, run oacore_server1 / oafm_server1

  Hi people,

  I am cloning EBS R12.2.4 for the first time. Database is in read/write mode. After clone then managed fs1. But while I was trying to services to run two services named (oacore_server1 and oafm_server1) not upward before clone, and ended with the error:

  ERROR: Could not start the managed server oacore_server1

  ERROR: Could not start the managed server oafm_server1

  Later, I tried to them manually, but the same results as the previous. I paste the details from the journal of oafm_server1.

  
  

  [Journal of the applmgr@abcddb] $ cat adoafmctl.txt

  07/26/15-00: 51:20: admanagedsrvctl.sh version 120.14.12020000.10

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  Validated the arguments passed to the ebs-nmstart-managedsrv option

  The server oafm_server1 is not up. Procedure to start the server.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  The Node Manager is already in place.

  ERROR: Could not start the managed server oafm_server1

  26/07/01-15: 07:57: admanagedsrvctl.sh: exit status 1

  ================================================================================

  26/07/01-15: 19:04: admanagedsrvctl.sh version 120.14.12020000.10

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  26/07/01-15: 20:48: admanagedsrvctl.sh: exit with status 0

  ================================================================================

  26/07/01-15: 21:12: admanagedsrvctl.sh version 120.14.12020000.10

  Call txkChkEBSDependecies.pl to make the dependency checks for oafm_server1

  Perl txkChkEBSDependecies.pl script has run successfully

  Validated the arguments passed to the ebs-get-serverstatus option

  oafm_server1 is in STOP mode.

  Validated the arguments passed to the ebs-nmstart-managedsrv option

  The server oafm_server1 is not up. Procedure to start the server.

  Check if the Node Manager is already in place...

  Connection to the node Manager...

  Connected to the node Manager.

  
  

  The Node Manager is already in place.

  ERROR: Could not start the managed server oafm_server1

  07/26/15-12: 49:18: admanagedsrvctl.sh: exit status 1

  ================================================================================

  Kind regards

  Ali

  Ali and Sandeep, follow these steps:

  starting at $ perl admanagedsrvctl.sh oafm_server1 - Dweblogic.security.allowCryptoJDefaultJCEVerification = true

  ARO

• This error: failed to start the Server Instance because the integrated Weblogic domain has not been built successfully.

  Hi Experts,

  JDeveloper 11.1.1.4.0 version, Windows 7.

  I installed jdeveloper 11g Studio Edition Version 11.1.1.4.0.

  «I'm trying to start the integrated by weblogic server: start run instancei Server weblogic the next ERREURLa get, Server Instance may not start because the integrated Weblogic domain was built not log successfully.the as a result of info"D:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd ' C:\Users\aroy\AppData\Roaming\JDeveloper\system11.1.1.4.0\o.j2ee.adrs\CreateDefaultDomain.py «»

  I tried searching but could not solve this problem.

  Reinstalled Jdeveloper, formatted my system did not work. Different version of JDeveloper also gives the same error in my system.

  One thing when I go to the folder structure, I can see the default domain contains only the config folder. The rest are missing.

  Also, I have all the rights of administrator on all folders/subfolders. I can create a separate domain and run the weblogic. But I can't start the new instance of JDeveloper. I get the same error.

  Thank you

  Roy.

  Also, what OS you are using?  I had a similar problem under win8

• OEM12c - failed to start the Oracle Management Server.

  I can't start the Oracle Management Server.

  The file referenced on has not been updated since October 6^th, I joined this EMGC_OMS1 file.

  The 12.1 database is on a separate server. The database and listener are on the rise.

  No matter what I put the results are the same.

  (Q) what are the correct environment variables to set?

  (Q) Comment can I start up the Oracle Enterprise Manager 12 c?

  I tried this command $OMS_HOME/bin/emctl start SGD

  With the House of WHO defined as:

  $ echo $OMS_HOME

  / u01/app/oracle/product/entmgr/mwhome_1/WHO

  $ $OMS_HOME/bin/emctl start SGD

  Oracle Enterprise Manager Cloud control 12 c Release 4

  Copyright (c) 1996, 2014 Oracle Corporation.  All rights reserved.

  From Oracle Management Server...

  Departure WebTier...

  WebTier started successfully

  Management Server Oracle could not be started

  Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out

  Management Server Oracle is down

  And

  I tried to run the. ./setWLSEnv.sh

  CD/u01/app/oracle/product/entmgr/mwhome_1/who/bin

  Then run:

  $. / emctl start SGD

  Oracle Enterprise Manager Cloud control 12 c Release 4

  Copyright (c) 1996, 2014 Oracle Corporation.  All rights reserved.

  From Oracle Management Server...

  Departure WebTier...

  WebTier started successfully

  Management Server Oracle could not be started

  Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out

  Management Server Oracle is down

  OEM 12 c SGD server.

  $ uname - a

  SunOS 5.10 zone6-03 Generic_150400-03 sun4v sparc sun4v

  Database server:

  $ uname - a

  SunOS 5.10 zone5-03 Generic_150400-03 sun4v sparc sun4v

  $ export AGENT_HOME=/u01/app/oracle/agents/core/12.1.0.4.0

  $ export ORACLE_HOME=/u01/app/oracle/product/12.1.0/dbhome_1

  $ export PATH = $ORACLE_HOME/perl/bin: $ORACLE_HOME/bin: / usr/bin: / usr/sbin: $ORACLE_HOME/appsutil/jre/bin: / bin: / usr/bin / X 11: / usr/local/bin: / usr/kerberos/bin: / usr/local/bin: / bin: / usr/bin: / home/oracle/bin:.

  $ export ORACLE_SID = emg1

  $ sqlplus / as sysdba

  SQL > select * from v$ instance;

  1 emg1 zone5-03 12.1.0.1.0 6 October 14 OPEN NO 1 ORDER

  NO NORMAL PRIMARY_INSTANCE ASSETS ALLOWED NO REGULAR EE 0

  The listener is in place: version is for Solaris LSNRCTL: Version 12.1.0.1.0

  The Agent is running.

  Newspapers/u01/app/oracle/product/entmgr/mwhome_1/logs as wlst_20141008110202.log

  Last login: Tuesday, October 7, 14:58:25 2014 of 10.122.60.160

  Oracle Corporation SunOS 5.10 generic Patch January 2005

  $ export OMS_HOME = / u01/app/oracle/product/entmgr/mwhome_1/who

  $ $OMS_HOME/bin/emctl start SGD

  Oracle Enterprise Manager Cloud control 12 c Release 4

  Copyright (c) 1996, 2014 Oracle Corporation.  All rights reserved.

  From Oracle Management Server...

  Departure WebTier...

  WebTier started successfully

  Management Server Oracle could not be started

  Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out

  Management Server Oracle is down

  $ ls - ltr /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out

  -rw - r - 1 oracle oinstall 19060 6 Oct 21:45 /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out

  Note the EMGC_OMS1.out newspaper do not updated.

  Thank you

  Paul

  Hi Paul,.

  (1) Env variables for who.

  $ORACLE_HOME/bin/emctl is a shell script which handles to define the variables of approx.
  ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME

  We use below

  unset TWO_TASK
  ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
  PATH = $HOME/bin: / usr/bin: / usr/sbin: / bin: / usr/ccs/bin: $ORACLE_HOME/bin. export PATH
  ORACLE_INSTANCE = / oracle/product/gc_inst/WebTierIH1; export ORACLE_INSTANCE
  ORA_TZFILE=$ORACLE_HOME/oracore/zoneinfo/timezlrg.dat; Export ORA_TZFILE

  2.) steps to start SGD

  ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
  Starting at $ORACLE_HOME/bin/emctl SGD

  or

  CD $ORACLE_HOME/bin

  . / emctl start SGD

  or
  ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
  $PATH = path: $ORACLE_HOME/bin. export PATH

  emctl start SGD

  Kind regards

  RAM.

• "Failed to start the sharing service connection of Windows Firewall/Internet (ICS) on local computer. Error 5: access is denied. »

  I had a problem with a virus earlier. I had the problem for most supported but now my firewall is disabled, and whenever I try to turn it on I get this error message. I don't know what to do, I have tried everything I can think of exscept a complete re - format. In addition to that my audio drivers keep uninstall themselves every hour or so sometimes he finally a little more. I tried everything I could to remedy these problems, but nothing has worked.

  Hello purple squirrel.

  You can try to do a upgrade in Place or repair your operating system to Windows XP.
  Click the number of the KB article to bring up instructions to complete an upgrade in Place.

  KB Article ID: 978788 -how to perform an upgrade on the spot (reinstallation) of Windows XP
  You will need to have a Windows XP CD and your product ID to reinstall. It is a long process. You won't have to reinstall programs, but you will
  you need to reinstall the Service Packs and Windows updates.
  Be sure and print the item for you reference, and be sure you understand what is needed before starting the repair.
  Please let us know if we can help with any questions.
  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Failed to start the Windows XP machine.

  Original title: order in the BIOS boot sequence.

  my computer is not start normally and in safe mode and does not attend the order of boot sequence in the BIOS.

  Hi adwaitthosar,

  ·         What is the brand and model of your computer?

  ·         You did it and changing of hardware or software on the machine prior to this problem?

  ·         You receive a code error message when you try to start the computer in normal mode or safe mode?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.