Mac Pro RAM, Audio, Bluetooth mouse problems

Similar Questions

• Bluetooth mouse problems with windows 7 ultimate

  I have two laptops which, without reason, all of a sudden loses connectivity of bluetooth mouse, it just stopped working and then I have to reboot to get it working again.  Two of these computers also have a bluetooth keyboard that is not assigned, the mouse.  I don't find anything wrong with bluetooth and have tried several different mice with the same results.  Windows 7 ultimate on two laptops.  a laptop computer used to run vista ultimate with the same mouse windows and it never happened, it started with windows 7.

  Hello

  These used laptops are relatively very close where they can interfere with each other?

  Will there be electrical/electronic or other types of interference in the region?

  Check with the bluetooth device to the manufacturer for known issues and possible solutions

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Norton and other security/antivirus/antispyware programs are known to cause problems with
  BlueTooth/mouse devices.

  =================================================================

  It is extremely difficult to solve the intermittent problems.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some: (not directly related to this issue)

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Mac pro RAM

  Apple mac pro, 2009, el captain, 3x2GB RAM installed osx. Can I install another 8GB RAM piece to put on?

  Yes, they can be mixed. Note that the 16 GB sticks can be mixed with small-sized ones.

• What Mac Pro do not suffer the problem of rivet of the Northbridge

  Hello

  What Mac Pro doesn't suffer from the problem of Northbridge rivet, out of 6, 1.

  Thank you.

  Google search only shows that 2009/4.1 is performed by the screws of radiator plastic for not

• 2008 mac Pro RAM

  I have a 2008 Mac Pro 8 Core Xeon 2.8 GHz with 2 GB of ram. I want to upgrade the RAM and reflected on this but let me puzzled is certified Apple and ECC. Regular RAM DDR2 will work in the computer? And I can't just RAM with a heat sink or only a certified Apple one? What are my options and the best results?

  You can use the non - ECC memory, but you cannot mix ECC and non ECC.

  You need a heat sink.

  Macs are picky about the memory if you need to get the memory of a place that guarantees that they will work with your Mac. Just return form is not enough.

• Yoga 13 Bluetooth mouse problem

  I use a Microsoft Bluetooth mouse sculpt with a 13 Yoga and every two minutes, the mouse pointer starts to wander and does not follow the movements of the mouse. This corrects itself after 30 to 50 seconds, but then it repeats every few minutes. I reinstalled on 23 October 2012 drivers wireless LAN and Bluetooth and the control of the Microsoft mouse software but the problem persists.

  I don't have any other mouse driver installed (with the exception of the standard Yoga trackpad). I checked that there are no other devices Bluetooth active on Yoga or even anywhere around.

  Can I do to find out what is causing this problem?

  Thank you, Ken

  Hi ken,.

  Good to know it works. The mouse will continue to use the generic Bluetooth driver, as long as you don't download and install the new driver combo Wireless & Bluetooth.

  See you soon,.

  neokenchi

• Bluetooth mouse problems

  Hi all...

  I have a few quick questions for everyone.  I recently bought my laptop as well as the Microsoft Bluetooth Notebook 5000 mouse.  I tried to get the laptop to see the mouse, but I keep coming up empty.  I guess my questions are, first, that my laptop has bluetooth correct?  Product number is D1E93UA #ABA, model M6-1225DX Envy.  Assuming that I have, someone had problems to make this mouse work?  I took a peek at the FAQ, but I'm running into some discrepancies.  The frequently asked questions seems to indicate that I should have a "Bluetooth settings" menu that is not displayed.  I have the 'add a Bluetooth device' option, so I'm a bit confused.  I began research for pilots and/or cards bluetooth on the computer and empty.

  Any help that someone could throw my way would be appreciated.

  Sorry for the late response... It seems that you have reason... your model do not have Bluetooth...

  HP ENVY m6-1225dx Notebook PC product specifications

  The form doesn't show no bluetooth, but according to the service guide, it supports some bluetooth combo when custom adapters...

  HP ENVY Notebook PC Maintenance and Service Guide of m6

• Alienware Alpha i7: Windows 10 upgrade with keyboard and bluetooth mouse problem

  Hi, after I upgraded my Alpha to 10 Windows x 64, the sytem lost connection to my keyboard and mouse bluetooth (both Microsoft, ironically).

  In the bluetooth Setup screen, the devices of just no longer appear.

  Unistalling the driver HID keyboard and restart has been recommended in many forums. I have not seen a change. Is there anything else I can do?

  TIA

  Hello

  You have probably the Intel 3160 ADAPTER Bluetooth 4.0 or the Intel 7265 ADAPTER Bluetooth 4.0. Try to reinstall the driver for your system and restart the computer.

• Update mac pro 64 g ram RAM 128 g?

  my friends suggested I use mac pro as work pc.however 64g ram is not enough for me.i use a really intensive software that can use photoshop and serval other software even ram.like batch time.isis there a way to upgrade mac pro ram 128g? 64g is not just enough and offeen I max on all the 64g ram.if this is not possible, I am forced to change the rear windows, cuse I need ram of 128g option.

  I really like mac os x, but ram is my problem

  It depends on what Mac Pro you have. Click here and search for your.

  (144282)

• Mac Pro 2009 will not start, no edge

  On Thursday, June 16, I sat to use my Mac Pro early 2009. I noticed that my Mac would not wake up by mouse click or the SPACEBAR on the keyboard. The led on my Mac, so I immediately thought that it was a problem with the graphics card.

  I force shut down the Mac by holding the power button. I waited 10 seconds and turned on my Mac back, everything was fine and I worked on my Mac for 3 hours.

  Last night 18 June I sat watching television when I heard the ringtone on my Mac Pro, I realized was a reboot. I went to the wire and connected and everything seemed fine. However later in the evening, I noticed a flashing LED on one of my two monitors. Once the Mac was on (fans spinning) but no signal to the monitor.

  I made another force off now the power button on Mac, but now when turn on the Mac there is no boot chime or control signal.

  I upgraded the graphics card to an AMD Radeon Sapphire HD 7950 in April 2013.

  Any advice would be much appreciated as I'm in the middle of a big project.

  Could also be a Mac Pro RAM chip inyour failure, sounds almost identical to a question I've had recently, I found the missing question when I removed the memory card.

  If one of the pair of cards, you will need to remove two cards.

  Try taking the memory OUT n test each module one at a time. Also check RAM editing maps, if none of the four lights on the two cards is turned on it idicates a defective module.

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• Start number Mac Pro 2008

  Connected to my Mac Pro early 2008 using a dvi on the graphics card but the monitor port does not detect the Mac Pro, is a graphics card problem? Computer monitor works fine with my windows

  Which version of OSX?

  What model of graphics card?

  What are the output ports are on the graphics card?

  This DVI-d port was working OK with the same graphics card and OSX version?

  The fan on the graphics card?

  Yo hear the phone ring when starting?

• It takes two seconds before first reacts when I take action. It is only on my Imac on my mac pro.

  Any action, I do first (replace the CTI, insert clips...), it takes more or less two seconds before first reacts. It is very boring.  The problem is that on my Imac on my mac pro, that I have no problem.  I work with the first CC.

  Is there a solution for this problem?  Thanks in advance.

  Hi Meg the dog,

  I have re-installed the program, and it seems to work fine now. Thanks anyway.

• No Apps tab / empty House food in a creative cloud on the new Mac Pro

  I just set up a new Mac Pro at work and installed the creative and signed cloud application, but there is no tab apps and my house is empty, displays a button that says 'Install Adobe Apps' which does nothing when you press.

  This new Mac Pro came with creative cloud apps installed from my tech team (we have a broad account University they set up with). The applications work correctly, but I would like to be able to keep everything up to date with the creative application of cloud. I have my own ID for creative cloud that works fine on my home computer and my old work computer, but it does everything just not on this new computer, even if I took out my old work computer. I see a lot of messages online on this matter on the windows computer (look they can delete the OOBE to fix), but I do not have these same files on mac.

  Anyone know what I can do to get the application to work as he does at home and on my old computer to work where I can see, install, uninstall and update all my apps?

  I opened a discussion with Adobe and was able to solve the problem. Please see the transcript below:

  Sansan: I understand that you have no Apps tab on your creative Application of clouds, what it is that correct?

  Brandon Schuk: I tried to solve it through the forum, but the staff and myself were not able to understand.

  Brandon Schuk: That is right. I see solutions in the forum but nothing helps with Mac.

  Brandon Schuk: Everything works fine on my old machine and on my machine at home, it's just this new Mac Pro, which is having the problem. Everything is disconnected on the old machine, so this should be my second computer.

  Brandon Schuk: My computer at home and this one.

  Sansan: thank you for the information, I'll be happy to help you with this.

  Sansan: Click on finder and then simultaneously press shift + command + G keys. That you will get the go to dialog box.

  Sansan: To go to the dialog box, type "~ / library '(without quotes) and click on Go."

  Brandon Schuk: it

  Sansan: Then open the folders > Application support > Adobe.

  Brandon Schuk: Okay

  Sansan: From there you can remove folders OOBE and AAMupdater.

  Brandon Schuk: deleted

  Sansan: Open the dialog folder to once again by clicking Finder > "shift-command-G" on your keyboard.

  Sansan: To go to the dialog box, type "/ library '(without quotes) and click on Go."

  Sansan: Then open the folders > Application support > Adobe.

  Sansan: From there, remove the OOBE and Adobeapplicationmanager folders.

  Brandon Schuk: Got it

  Sansan: Have you been able to remove it?

  Brandon Schuk: Yes

  Sansan: Now back to the Utilities folder and trash: cloud Adobe Creative and files of Adobe application manager.

  Brandon Schuk: File utilities?

  Brandon Schuk: Oh, I see.

  Sansan: Okay.

  Brandon Schuk: Wasn't expecting to be there

  Brandon Schuk: deleted

  Sansan: Okay.

  Brandon Schuk: Should I close Office creative cloud at any time?

  Sansan: https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  Sansan: Download the Adobe CC tool from the link above.

  Sansan: After download you if please run the installer and let me know what options you happen to clean.

  Brandon Schuk: Resembles a certain applications listed

  Brandon Schuk: Clean all?

  Sansan: Please let me know the first two option you get?

  Info: your chat transcript will be sent to [email protected] at the end of your cat.

  Brandon Schuk: Adobe Application Manager for Mac OSX 10.6 and CC Adobe Extension Manager

  Sansan: If please select the first and click on selected cleaning.

  Brandon Schuk: fact

  Sansan: Close the application now.

  Brandon Schuk: closed

  Sansan: http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4774&fileID=4438

  Sansan: Download Adobe Application Manager from the link above.

  Brandon Schuk: Downloaded and appear to be installed.

  Brandon Schuk: He says "update" for awhile and then disappeared.

  Sansan: since the utilities > Adobe application manager > Core > launch PDApp.

  Sansan: I know the status?

  Brandon Schuk: He's almost done--until the progress bar.

  Sansan: Okay.

  Brandon Schuk: He recently completed and the desktop application creative cloud dropped down

  Sansan: Please log in.

  Brandon Schuk: I am, and I now see the applications tab.

  Sansan: Super! Then, the problem is resolved.

  Brandon Schuk: Thanks a lot for your help

• Mac Pro early 2008 adding ram problems

  I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

  Ron

  How are new?

  Where have you bought the new?

  All new are identical?

  All the 'old' are the same?

  What is the size of the old and new?