Samsung ATIV Smart PC Touchpad Driver Update Failed

Similar Questions

• When the Samsung Ativ Smart Pc pro device will be updated for windows 8.1?

  I have Samsung Ativ Smart Pc pro device 64 based system XE700T1C-H01SA model number and I want to know when it will be updated for windows 8.1?

  A quick Bing or Google could tell you to October 18.

• Pavilion g6-2002au: USB driver update failed

  I did a periodic update of the system on the laptop drivers.  The last time, I remember it was almost 2 years ago.  And this time I encountered problems.

  This topic follows my request on this thread about SafeMode start/restore after a driver update failed:

  http://h30434.www3.HP.com/T5/notebook-boot-and-lockup/booting-safe-mode-on-HP-G6-2002au/m-p/5690028/...

  And as I said it I begam making one an update to pinpoint what caused the original problem with the bulk update.  After 7 by an updated driver, I found the (or, at least) a cause of the problem.  The following image, 2 PCI to USB host drivers caused an error message from windows after the update.

  

  There are 6 USB drivers linked to this very old/aged list and clear terms the number of items of equipment installed on the laptop.  See this screen shot of the Device Manager list:

  

  Drivers USB 6 update, I have taken these 2 items to be updated first because 1) they seemed to be the oldest (replacements were dated in 2010), and 2) if I understand technology, these bits connect the processor to host chip and the actual hub bus.

  I chose just these 2 PCI-drivers for update (unchecked the selection for all other boxes in the recall list) and proceeded.  When the installation has ended a windows message box reported an error of windows to one of the devices (one, not declared or referenced by a number).  Considering that the originals had worked for years without apparent problems, I started a process of restoration.  It worked, and restored 'very old' pilots work again without any error boxes, while the most recent have not.

  This is a screenshot of the restored Details of driver (work), which seem to be the original objects from Microsoft for XP3. Vista and windows 7

  

  Any ideas why this (the driver update failure) happens?

  Davidk10

  @Davidk10

  There is no update from HP, the prograns you are using is not supported by HP.

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• HP Pavilion x 360 Convertible: the Intel HD graphics driver update fails to install

  Hello

  I got my new laptop for Christmas and a few days ago, HP support assistant told me that there was a Version "Intel high definition (HD) Graphics Driver Update": 10.18.15.4281Ep3. I downloaded the updated, but after that 4 attempts trying to install via HP support assistant I kept getting the same message "installation failed." Then, I went to my downloads through Explorer of files and found the downloaded file. When I click on the file it takes me to the Setup Wizard and I can start the installation, but about 2/3 of the way if the installation I get the same message "the process cannot access the file because it is being used by another process" and then the installation completes without completing. I'm not sure how to find out which process is using the file or how to do the complete installation so I would really appreciate your help.

  Thank you very much, Rich

  Hello

  Follow the steps below to uninstall the driver:

  1. Press the Windows key + R
  2. Type devmgmt.msc
  3. Press Ok
  4. Right-click on the graphics card and select Uninstall
  5. Restart the computer

  After the computer restarts, run the Windows Update and the last update will be installed.

• the sp35174 graphics driver update fails to install and SP37534.exe fails in response resignations:

  Graphic updates failed, two of the three listed.

  SP35174 fails States: error in NVCPL. Entry DLL missing NvCplRestorePersistence - gives same error separated 4 messages.

  SP37534 hangs and will not end after 2 hours of waiting, only the green progress indicator keeps the movement from left to right.  Manager tasks indicates that it does not.

  Pavilion m7750n

  Vista operating system

  NVIDIA GeForce 6150LE graphics
  Computer seems to work OK

  Someone at - it suggestions on how to correct these errors of installation of driver update?

  SP35174 and SP37534 are your graphics drivers and you just install one of them. SP37534 is the most recent of the two, but I would try to install the driver nVidia GeForce 301.42 directly from nVidia. This driver is the latest driver for your 6150LE. I would like to uninstall any nVidia graphics driver currently installed before 301.42 also consider installing the driver nVidia nForce 15,49 chipset, which will good update number other drivers on your computer.

• The driver update failed

  When I try to update my drivers on hp.com, it says I need to download a file to automatically scan my computer. So I download and nothing happens, it opens, downloads, disappears and it is. I downloaded 5 times and I'm still not able to update my drivers.

  Im sure that I need to update, because my computer crashes randomly. Any suggestions would be helpful, but please make it easy for me to understand. I am not very computer

  Laptop HP G62 - 208CA

  captain_kirk_9,

  The error you received since the start of the test, is that the HARD drive has failed.

  Here is a link to a phone number to call HP and see what repair options, they may have for you.

  Also, here is a link to your service manual that has the part number for your disk and show you how to install a new HARD drive.

  Page 47.

  Your HARD drive is a reference number of 320 (7200 RPM) 599055-001

  Here is a link to the HP parts store

  I would like to know how everything goes.

  Nice day.

• The graphics driver update failed: 'WindowsUpdate_800705B4""WindowsUpdate_dt000"

  A long download and install driver for Nvidia ended with the message of this failure. What should I do?

  You should not be installing drivers from Windows Update anyway. I don't know why it failed but maybe because it is the wrong driver for your video card. Often, this happens with the drivers available on Windows Update and is one of the reasons we main technicians say do not install the drivers from there.

  Here is some general information about the drivers. Please note the first sentence of the information, which is the most important part.

  The first law of Driver Updates is "if it's not broken, don't fix it". Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• Reference Dell touchpad driver updated for Windows 10 new gesture

  Hello

  A new major upgrade for Windows 10 has been released a few days ago, and the update included a new gesture that allow the user to pass the workstations with 4 fingers on the touchpad and slide between the left or right to switch workstations.

  This new gesture does not work on my touchpad and I guess this can refer to the current version of the touchpad driver is not yet supported in this function because other gestures as three finger swipe to move all open windows and three finger tap to call Cortana are always works well for me.

  I was wondering if there is no update for the driver for the touchpad to soon, or all those were just my own question...

  Thank you!

  CALVINLAU0914,

  Can you give us the model of the computer you have so that I can look for drivers?

• Bluetooth not detected in Samsung ATIV Smart Pro

  Bluetooth is not detected in ATIV Smart Pro, is there a solution to this? There is no option for me to turn it on in the background. Can anyone help?  Thank you very much, your help is much appreciated

  Hi Lewis,

  Please follow the steps in the link to ensure that airplane mode is disabled and activate the Bluetooth settings.

  Check out the link:

  How to register a Bluetooth device in Windows 8

  http://www.Samsung.com/us/support/howtoguide/N0000504/9856/116930/XE700T1C-A04US

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Windows 8 Pro upgrade on Samsung ATIV Smart PC Pro XE700T1C-A01IN

  Hola,

  Got ATIV Samsung Smart PC Pro XE700T1C-A01IN
   
  Here is the configuration of the system:
   
  Edition of Windows: Windows 8 single language
  Manufacturer: Samsung Electronics
  Processor: Intel Core i5-3317U CPU @ 1.7 GHz 1.70 GHz
  Installation of memory (RAM): 4.00 GB (3.89 GB usable)
  System type: 64-bit, x 64 processor operating system

  Hard disk: 128 GB
  Pen and touch: pen and complete Windows Touch support with 10 Points of contact
   
  I want to upgrade to Windows 8 Pro because I am a .NET developer and I have Visual Studio Ultimate 2012 and SQL Server installed 2012. Also, I had MS-Office and Norton 360 installed. I was only 35 GB left.
   
  I'm working on the Windows Phone 8 App development requiring Hyper-V.
   
  What are the advantages and disadvantages of the upgrade to Windows Pro 8 given that it is a Tablet and also, this Windows Blue is on the cards.

  Should I switch to Windows 8 Pro or not?

  Thank you

  First of all, Windows 8.1 (blue) will be a free update for users of Windows 8 and Windows 8 Pro.

  There isn't really any disadvantages of the upgrade to Pro, just additional benefits;

  -Hyper-V client

  -Remote Desktop

  -BitLocker Drive encryption

  -Network backup

  To the top of Windows 8 for Windows 8 Pro:

  http://Windows.Microsoft.com/en-us/Windows-8/feature-packs

• Windows 8 Samsung ativ smart pc stuck in the bios Setup

  I bought a samsung smart ativ pc 3 months ago, it worked fine, all of a sudden yesterday when I turned on my samsung, came the bios configuration of samsung and me cannot go into windows since yesterday, when I go out, it restarts and return to the configuration of the bios samsung...

  I spoke with some technicians and they told me, I have to start my computer, the case is that I know how to start but I don't know how to make a bootable cd/dvd with 8 32-bit windows.
  Please help me. I really need your help.
  Windows 8 32-bit
  2048 MB of total memory-

  Hi Sajdah,
  
  You can check the suggestions and check them below.

  a. If you have the file ISO in Windows 8 , you can create a bootable disk or bootable flash drive.

  b. Click to open the Windows 7 USB/DVD Download tool installation file.

  c. When you are prompted to either save the file to disk or run it, choose run.

  d.       follow the steps in the installation dialog boxes. You will be able to specify where to install the
  

  Windows 7 USB/DVD download tool.

  
  

  See the following suggestions to use the Windows 7 USB/DVD download tool.

  a. Double click, open the Windows 7 USB/DVD download tool shortcut created on the desktop.

  b. in the SOURCE FILE box, type the name and path of your ISO of Windows 8 file, or click BROWSE and select the file in the dialog box OPEN. Click NEXT.

  c. select USB DEVICE to create a copy on a USB flash drive or select DVD disc to create a copy on a DVD disc.

  d. If you copy the file to a USB flash drive, select your USB device in the drop-down list, and then click BEGIN COPYING. If you copy the file to a DVD, click BEGIN BURNING.

  e. when your ISO of Windows 8 file is copied to your chosen media, try to boot from it and check.

  
  

  You can read the steps below to start your computer from the bootable device (DVD/Flash Player).

  a. procedure to enter the BIOS settings vary depending on the manufacturer. Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts.

  b. go to the Boot Device priority, select the CD/DVD drive / Flash drive as first boot device (use the arrows to change the priority of the unit), press F10, select Yes to save the settings.

  c. now restart your computer, check to see if you can boot from the boot device.

  For more information, see the documentation provided with your computer or go to the website of the manufacturer of the computer.

  I hope this helps. If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• Satellite P200-1 b 6: Sound Driver update fails, and HD-DVD player does not work

  I just bought a laptop Satellite P200-1 b 6 and spent the day installing the updates recommended by the TEMPO programme. One of them was an update of RealTek audio driver but on run this it fails at about 80% of the way through with an error: "install Realtek HD Audio Driver failure!

  Now, the reader of HD DVD, Toshiba will fail with an error "unable to output the video to an external device.

  Please change your display keys of the device by pressing the Fn + F5 after the end of the application "." I tried this but it seems to have no effect.

  I'm now regretting starting to update the drivers installed. Should I try to rebuild the machine using the recovery discs or is there another solution that someone found? Or if others have found the upgrade work?

  All advice welcome

  Hello

  When I started using PC, one of my friends told me something: do not touch the well-executed system. I know that you, like so many other people out there, have updated things but as you can see, it can go in the wrong direction.

  This TEMPO software is good, but if all goes well the leave it as it is. What you can try is to use the System Restore tool and move the BONES to earlier time and hope everything will be OK again.

  Please post the result.

• desire x 2 touchpad driver update does not apply

  My envy of x 2 is updated and works very well. I kept all updates applied by the wizard of Support WIndows 8 HP. There is currently a significant update showing as available:

  SoftPaq SP1934 Version 16.5.3.3

  This update download well but gets an error every time on installation. It is marked as a major update, but no matter what I do (restart first, nothing else running, etc.) it errors on install.

  How to spend it? HP drivers / BIOS shows also recent, they are.

  Try to install the driver for the Synaptics TouchPad on the site: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-119144-1&cc=us&dlc=en&lc=en&os=4131&product=5327932&sw_lang= (Direct download link)

  If is not installed, then go into Device Manager and uninstall the driver + remove the software, and then try to download and install this driver.

• Update SW GPS driver update fails

  I tried to install the GPS driver for months and I continually get the error 'Failed-10' and can not install it.

  Category: essential

  State: Installable

  Size 15.5 MB

  Result: Failed(-10)

  I have a Samsung tablet.

  Can someone help me?  The Help menu does not do this.

  Thank you

  You must contact the technical support of Samsung. We HAVE provided for Microsoft Software user assistance only at this forum.