Samsung Galaxy S2 laptop cannot connect bluetooth for Win 7

Similar Questions

• 15 d 103tx computer laptop need support bluetooth for win 7 x 64

  Hello

  I am facing the same problem of typical like many others on this forum, I bought the new laptop Hp 15A 103tx and installed windows 7 64-bit... but I am not able to connect with any device bluetooth through my laptop. Not able to find drivers for my bluetooth 4.0 I went through a lot of similar position, but unfortunately they are not specific to the model of my own laptop so I had to register and make a post.

  whenever I try downoad driver using windows update, it always leaves some components without a driver... with my current setup, I'm stuck with a loop infintite seeking for any bluetooth device to connect to. In addition, no device can search for my laptop as well. I don't know how to solve this problem. any help would be appreciated.

  [Lack of software components for]

  -Bluetooth L2CAP Interface

  BTHENUM\ {6e0c8f4c-d928-4852-b6b2-f0f0e0d126fa} _LOCALMFG & 0000

  Bluetooth hands-free audio-

  BTHENUM\ {24df01a9-3e4f-4c9f-9f66-5aa8ab14f8f4} _LOCALMFG & 0000

  Bluetooth device-

  BTHENUM\ {84a1e9b8-12ba-4a9c-8ab0-a43784e0d149} _LOCALMFG & 0000

  Hello:

  Have you tried this driver Atheros BT for W7?

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128830_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Peripheral USB MTP cannot be installed when samsung galaxy tab cable is connected in Windows 7.

  Peripheral USB MTP cannot be installed when samsung galaxy tab cable is connected in Windows 7. How to solve this problem? My samsung galaxy tab can even be detected using my laptop and whenever I plug the USB into the laptop, a USB MTP device installation error message failed ejects. What should I do?

  Hello

  1. What is the status of this device in the Device Manager?

  Check if there is a yellow bang sign or any of error code.

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Refer to the article below for the procedure:

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• Samsung Galaxy S3 does not connect to the DELL laptop

  Hello

  I use the operating system Windows 7 Home Premium 64 - bit with the Intel processor i5-2450 M CPU @2.50 GHz. recently the past 4 months, I have observed that Samsung Galaxy S3 does not connect to the Dell laptop

  We could not see the content of Samsung Mobile in the PC. No Popup message is coming

  I tried the options below

  1. connected with different cable to the laptop, the original cable

  2. try with Samsung Kies

  Can you please help us in this regard that I wasn't sure if the drivers problem.

  We have seen the error in the mobile below.

  "Could not find the software on your computer that can recognize your device.service Pack 3, Windows Media Player, version 10 or greater, for Android File Transfer for MAC OS or Windows XP must be installed.

  You can download and install Kies on your http://www.samsung.com/kies computer to synchronize with your device data, back up the data and upgarde your device (Windows and Mac OS are supported). »

  I use Windows 7 and Media player version 12.0.7601.18150.hence was not, of course, why the Samsung Galaxy S3 does not connect to the DELL laptop

  Thank you

  Kalyan

  Hi Kalyan,

  From my research, this error message indicates that you have an old version of Samsung drivers installed on the computer.

  Several clients are faced with this question after that they have updated the version of Android to 4.3, but the version of the driver is not updated.

  I suggest you uninstall all traces of Samsung is installed in the list programs and then reinstall the device drivers Samsung from the link provided in the previous post.

  To uninstall a program see the link below.

  Uninstall or change a program

  Once you uninstall programs related to Samsung download and install the drivers for Samsung devices.

• Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  Problem of PSG - Samsung Galaxy phone does not connect on windows 7 pc

  I have two identical, the Samsung Galaxy phones, it connects to the pc to transfer files either does not connect despite the many possible corrections, I've read online by train.

  The phone tries to connect but is a problem of the PSG, while it is plugged said to install the driver, then momentarily, it says ready to use and then goes back to install driver again, it done a few times and then says failed.

  I tried to reset the phone to factory settings, reinstall the driver etc etc but nothing I tried works.

  I've read other posts of similar questions and have created a mtltrace.etl file, but I don't know where or how to download for investigation.

  Any help appreciated

  Hello Rob,

  Thank you for the update on the issue.

  I suggest you to uninstall all the drivers, that is Samsung as well as Bluetooth.

  Then, restart the computer and plug all phones Samsung three each so install the drivers and software from Samsung kies from the link below:

  http://www.Samsung.com/UK/support/model/gt-S6810PWNBTU

  After installing everything that the Samsung and then restart the computer and then plug the adapter Bluetooth (driver installation) and check if the problem persists.

  Thank you.

• My HP Pavilion dv9720Ous laptop cannot connect to internet

  I installed a new Buffalo-G-CBOA router for home. My HP Pavilion dv9720Ous laptop connects to the router, but the HP laptop cannot connect to internet. Is there something that needs happeon on the PC to connect to the internet? Thank you

  How are you communicating on this forum?

  I suppose that from another PC, correct?

  Download you the driver on the PC that you are using, and you glitches the file on a CD, or copy on a USB key.

  You transfer the driver file that you copied to a flash drive or a CD into the computer that needs the update of the driver, then run.

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• My laptop cannot connect to wireless internet. Ethernet works fine. Wireless is enabled on the laptop.

  original title: portable wireless problems

  Hi guys, my laptop cannot connect to wireless internet. I tried to use ConfigFree Diagnostic tests already installed on my computer, reset the router, and even taking on the router for 30 seconds and put it to. On my laptop wireless switch is turned on, too. Is the only way I can connect to the internet via an ethernet cable and I started to disconnect from the wireless internet just yesterday. I know that my router is not the problem because I have a laptop connected to her brother. Also, I tried the FN + F8 key on my Toshiba laptop. Thank you in advance.

  Hello

  Is this also your thread with a different name?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/wireless-Internet-on-laptop-not-working/aedbda38-a56e-E011-8dfc-68b599b31bf5

  ====================================================================

  To do a hard reset on the router and the modem, you must feed their STOP, wait 3 minutes,
  then then turn on the modem on - when it comes back - router - when it is set to zero
  computers.
  ----------------------------------------------

  Anyway the same answer applies: update WiFi driver that something has probably
  He touched. Make sure that the wireless device is turned on, if there is a switch on the computer.
  Many Toshiba have a WiFi switch on the front or side.

  Update the driver WiFi, use the wired (NIC) to download the driver or do it on another
  system and your transfer on removable media such as CD, DVD or a USB key.

  Control Panel - device - network - WiFi note the brand manager and full
  model information - double click - writing tab Drivers version - then power management tab uncheck "allow the computer to turn off this device...". »

  Then on the tab driver, click Update driver (this can do nothing as MS is far behind
  drivers of certification) - then right click on the device - UNINSTALL - REBOOT - this will
  update the driver stack.

  Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to
  where you put it - make a right click on it - RUN AS ADMIN - REBOOT

  Then go to the site of the manufacturer of the device and get even more recent (Realtek, Intel, or one that makes
  the device) and try the install again.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ====================================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir

• Computer Vista laptop cannot connect to new wireless router

  I had the laptop for about a year and a half, and he has a history of being pretty skittish about the wireless connection.  Often he simply refuses to do so.  During vacation last year, for example, the other three laptops connected family easily to wi - fi hotel, but mine has refused to.  There are a lot of other moments when the laptop could not connect, but I was able to connect to two most important places - home and work - without much trouble, and so I haven't looked too hard to solve the problems of connection up to now.

  This week, I replaced the router in my original configuration.  The old Netgear router kept giving up the connection between her and my ISP.  The new Linksys router looks rock solid in this regard.  I have a desktop running XP computer that is wired to the new router Linksys, and he sees the internet very well.  My laptop Vista unable to connect (wireless), however.  He sees the network with a lot of intensity of the signal, and it tries to connect.  I get a message saying that the connection takes longer than usual, and then another message saying 'connected.'  However, I do not have internet access, and I see other devices (just the XP desktop, really) on the network.  The Network and Sharing Center shows my laptop connected to the 'unidentified network', and then there is a red X between this network and the Internet (represented by a grey globe).  Laptop computer signals its 'access' as "local only".

  From the desktop, I can access the internet, so the router is connected to the points upstream.  From the desktop, I can also access the router configuration pages, and I see that it does not list the laptop as a dhcp client, even if the laptop thinks that it is connected.

  ipconfig on laptop computer displays a wacky IPv4 address: 169.254.2.91 and I guess that the laptop does not get an address passed to the router.  I think that there should be a 192.168. *. * address if it worked properly.

  Now, I was pretty sure my laptop's wireless adapter to work properly.  It always connects to the old router and it always connects to the work.  But to be sure and really test the new router, I went out and bought another USB adapter wireless.  When I plug it into the computer to Office XP, the Office connects to the router and can see the internet (even with the connection cable is disconnected).  So the new router and the new wireless USB adapater properly.  When I plug the USB wireless adapter into the laptop, the laptop still can't connect and still not get a good ip address assigned by the router.

  I've been at this for a few days now, and I could really use some help.  I read a few items in the Microsoft forums that was supposed to fix the problem.  One of them told me to try to start a program called DHCP in the Administrative Tools folder.  I do not have this program on my computer.  Another told me manually change my registry (ouch!) and add a new DWORD value, and set its value to 1.  I did, but it did not fix the problem.

  I would be very grateful for any help.

  Jim

  Alright.  I am home to work and back again.  I have read several posts with people reporting problems similar to mine, so I guess I'm not alone in this.  In a thread, the experts proposed to start in Mode safe mode with networking.  So I gave that a shot.  I still couldn't really connect - just this 'local only' without an assigned IP address.

  One thing I did notice, is that my laptop brand and its wireless adapter seem to get a special mention in most positions.  I have a HP Compaq Presario CQ50 Notebook PC running Vista Home Premium SP2, 32-bit version (even if the processor is 64-bit).  The wireless adapter is an Atheros AR5007.  Several other people with this card have reported problems.  Maybe it's the cause?

  I look into updating the driver for the card, even if yesterday's test with the separate USB wireless adapter showed that the problem could not just be limited to the Atheros card.  To search for a driver update, I connect my laptop to the router with an ethernet cable.  It's nice to see the web on your laptop.  No update driver does.

  For fun, I try to establish a wireless connection with the router, while the wired connection is still in place.  Looks like maybe it worked?  I say a little prayer and unplug the ethernet cable...

  It's a miracle!  I have a wireless connection to the router and beyond, to the internet.  Huzzah!

  The network has a real name, too, instead of just 'unidentified network '.  I want to change the network type from the public to the private, which I was unable to do while he was still 'unidentified '.

  Can I terminate the connection so that I can see what happens when I try to reconnect.

  Another miracle!  It connects to and still see the internet.  Callooh!  Colay!

  Next test: see what happens after a reboot... (please, please, please)...

  Ch-ching!  It works again!

  Final (?) test: reinstall the McAffee internet security suite and restart.

  And it still works.

  Here's a recap of what I found:
  1. laptop could not connect wireless router again, despite dozens of attempts in which I get every available straw
  2. laptop computer could see the internet when connected to the router
  3. laptop could connect wirelessly to the router while the wired connection is in place
  4. Once this first wireless, laptop computer was able to connect to the router even when the wired connection has been removed and the computer restarts

  I would describe my discovery above as a work-around rather than as a solution, however.  It does not always help me stay connected the next time I'm on vacation, for example.  But perhaps the information I provided can help experts to diagnose the real problem a little.

  I look forward to hear something back.

  Jim

• How to transfer photos from phone Samsung Galaxy to laptop

  photos

  can you help me to download pictures from my cell phone from samsung galaxy to my laptop?  I have a compaq presario cq60 laptop. Thank you

  If the phone is not recognized with a drive letter...
  I don't have the answer... perhaps the support of Samsung
  could help you.

  Samsung support
  http://www.Samsung.com/us/support/

• Wireless laptop cannot connect to Photosmart C5180 printer on network

  I recently got a new computer, which is the main connection to our home network.  We have a laptop and a Photosmart C5180 printer.  I can't get the wireless laptop to connect to the printer, even though I have the shared printer on the pc.  I have the printer connected to the pc via a USB cable.

  I see the printer shared and available on the laptop, but get the error message when you try to print.

  Does anyone know what I'm missing that will allow me to print from wireless laptop?  It worked until I'm the new pc, so I know I'm missing something.  Should the laptop have both installed printer software/drivers?

  Yes, the printer directly connected to a router with an Ethernet cable will be the simplest solution.

  Yes, all computers will be able to access the printer on the network as long as they are connected to the same router (Ethernet or wireless, regardless).

  He shared from the computer and the printer connected to a computer with a USB cable are not a real printer on a network.  This creates what is essentially a print server and the computer with the USB connection manages the interaction of this printer with all the devices on the network.

  A USB connected printer sharing can be done, but it's a lot more work that the printer is connected to the router with an Ethernet cable.

  It's really a lot more work to set up the printer with a printer shared over a network connection USB method true when it comes to do this with Windows 7.

  Windows XP made it incredibly simple, but he was not very secure on a network.  With Windows XP, all you had to do was to share the printer, and then install it on another computer.

  With Windows 7 on both computers, you must configure a homegroup, enable file sharing and printers (disabled by default), share the printer and install the printer on the computer client / remote.  In addition, this method will require the host to be on anytime for remote printing machines.

  The printer is connected to the router with a Ethernet means that the functionality of the printer depends solely on the router being on (most are on 24/7).  Computers will print regardless of the other computer either on or off.  There should be a shorter time in the impression that a computer is responsible for printing rather than two computers.

  Again, I will be more than happy to help you set up with the method USB shared with two Windows 7 computers if that's what you want.  You find that it is much easier to use the Ethernet connected method to be simpler and more efficient to print well.

  If you want, here's a little more information from Microsoft on sharing a printer between two units of Windows 7.

  Setting up a homegroup

  Activate the file & printer sharingand sharing the printer on a Windows 7 computer

  As long as the printer & file sharing is enabled and two Windows 7 computers are in the same group of residential, you should be able to use the USB share method.  Without these two two options being Setup, it simply does not work with two Windows 7 systems.

• New routers cannot connect wireless for HP 3510

  I have a new router and you have to reconfigure the connection Wireless for my HP 3510.  I go to the printer and the installation program and to reconfiqure and it States to connect to a USB cable which I am there my new SSID and password on my PC which is correct, and then when I go to then it fails to connect.  What should I do?

  Called Technology Services, it took 2.5 hours to solve the problem.  It seems as the Deskjet 3510 series (mine is actually and 3512) has a big problem with the connection to suppliers IP router which I just got.  They did fix after taking possession of my PC, the software, re - install the software and then spending a lot of time to get an IP address for the router of unistalling.

• Satellite A305-S6852 - connection Bluetooth for Samsung D900i problem

  Hi guys!

  I have laptop Toshiba A305-S6852 and I have some problems with my Bluetooth.
  I can't use it. When I followed this path Start-Toshiba-bluetooth-bluetooth settings, something happens to my screen that install the Bluetooth driver...

  Please wait and AI? m pending but a few minutes later, some warns happens too "Please, plug the Bluetooth device and click OK Office? and in fact I na? t understand what that means...

  So what do I do to connect to my phone (samsung D900i) via Bluetooth?
  Thank you

  There are 2 possible reasons that may be the cause:
  -Your laptop does not have Bluetooth. Turn your laptop upside down and check if there is a label of bluetooth. If this is not the case, no BT is inside.
  -Your antenna switch is off. Turn it on if it is off.

• DUN connection Bluetooth for Pocket PC, Vista and the user rights restricted

  Hallo,

  I managed to establish a DUN connection to my smartphone WM5 Pocket QTEK 9100 Bluetooth-based and the Toshiba Stack, latest version. My laptop is an X 200 - 21 d with Vista Home Premium.

  Everything works although I do not change the Vista user to a user with restricted rights, for the user with the Bluetooth utility administrator rights has created a new DUN connection and a new modem with a virtual COM port. The user with restricted rights is not allowed to set up a new connection, but it is necessary to connect to the smartphone with the Bluetooth utility. On the administrative account the option button to allow the connection to call other users is disabled and grayed out, so there is sort now open it up to other users.

  How can I set up a Bluetooth DUN connection for a user with restricted rights?

  Thank you in advance!

  If the user restricted use the same DUN like the Admin Setup?

  If Yes, then you can use "Bluetooth-> custom Mode settings". This allows you to
  Select the "Standard 33600 Modem" from the list that has been set up before
  the admin. So every ONE that has been configured by the administrator can be used by the
  User restricted with this method. Restricted users cannot install hardware, so
  If the administrator has not installed a modem, then also the restricted user cannot use it.

  The Admin can pre-install a modem with Bluetooth stack installation.
  This is useful if the restricted user should be able to configure a DUN connection
  with the advanced modem settings which are not used by the administrator.

  This should be possible if the file "as.ini" has a line "MODEMINST = 1".