Samsung Story Station HX-DU010EA/G5 1 TB external hard drive

Similar Questions

• Samsung Story Station

  Hello I have a Samsung story station HX-DU015EB The 1.5 TB version.

  When I connect it to my computer nothing happens. I hear a response from the Station of history, but nothing appears on the computer. It is connected, but still not. The computer is that there is something to report, but I can't access my device. The only thing I can access is the updates, but when I click on update, it says already it is fully updated, so nothing I can do.

  What should I do?
  I have Windows 7 on my PC.
  Would be happy if someone could help me

  Hello

  This problem may occur because of driver or settings.

  I suggest you run the fixit for the following Microsoft article and if it helps.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to download and install the latest orders from the site of the factory and check if it helps.

  Software and services: http://www.seagate.com/services-software/

  Refer to the steps in the following article.

  Samsung external hard drives: common problems: http://knowledge.seagate.com/articles/en_US/FAQ/221451en

  Hope that the information provided is useful.

• Can I connect my I pad for Samsung external hard drive m3

  is there a lead to transfer the data from my external hard drive Samsung-m3 on my I pad

  N °

• Samsung S2 Portable HXMU050DA 500 GB external hard drive not compatible windows vista

  This is the first time im connect my external hard drive. im running windows vista and I get a message on the pilot is not not compatible or that I need to download a driver, so I went to the samsung support page and I couldn't find the driver... Please help

  This is the first time im connect my external hard drive. im running windows vista and I get a message on the pilot is not not compatible or that I need to download a driver, so I went to the samsung support page and I couldn't find the driver... Please help

  Click here for the driver:

  http://www.Samsung.com/us/support/supportDownloadCenter.do?prd_ia_cd=N0000428&prd_mdl_cd=HXMU050DA&prd_mdl_name=HXMU050DA

• Samsung external hard drive appears... The lights are flashing

  Suddenly my Samsung external hard drive will appear in my Windows Explorer or disk management, the lights flash, but it does not seem to connect to my laptop, have tried on 3 other machines and still does not. Anyone have a similar experience?

  Perhaps just what the usb cable?

  Hello Fregal

  Thanks for posting your query in Microsoft Community.

  As you said there are problems connecting external hard drive to the computer.

  I would like to know some information about this problem to help you better.

  (1) have you made changes in the computer or hard drive recently?

  (2) the hard drive didn't work on any of the three machines?

  (3) what is the model number of the hard drive?

  In the meantime, please try to follow the following suggestions to solve the problem.

  If you have another USB cable for the hard drive then try to check the matter with different cable.

  If this doesn't help then try to follow the link below to run the fixit and see if that helps.

  http://support.Microsoft.com/mats/hardware_device_problems

  I hope this works. Otherwise, feel free to write us again and we will be happy to help you come.

  Thank you

• USB on Samsung detects is not the external hard drive

  I have Samsung Series 9-two usb ports on right are does not detect my external hard drive - he was working, I don't know what happened, and now I can only connect it to the USB port on the left side... Please help

  I call the support Samsung, or review their forums, that what you describe suggests an internal hardware problem (connection), not a victory, one

• Samsung HD155UI 1.5 TB SATA external hard drive showed that 500 MB in Windows 7.

  Original title: Samsung HD155UI SATA drivers

  Looking to install a drive external hard Samsung HD155UI/32 1 .5TB backup for Dell XPS | M1530 laptop under Windows 7 Ultimate SP1.

  Spec Dell: Intell wax 2 Duo T6600 2.20 GHz CPU, 4 GB of Ram, 64-Bit OS.
  HD155UI installed, Win driver for the new hardware, only to see only 500 MB.
  Looking for drivers updated
  Driver:
  Provider: Microsoft Corp.
  File version: 6.1.7600.16358 (win7_rtm_090713-1255)
  Please notify.
  Chief

  Hello

  Thanks for the update.

  I wish to inform you that it is possible to merge two partitions into one, if both are on the same hard drive.

  You will need to remove one of the partitions and extend the other to include one deleted.

  You can view the steps proposed by BurrWalnut in the following link:

  http://social.technet.Microsoft.com/forums/Windows/en-us/19b60bc3-86a2-45D1-b2b5-16f9f3671a2b/how-to-merge-partitions-in-Windows-7-

  Please get back to us with the State of the question.

• DEVICE SAMSUNG EXTERNAL HARD DRIVE INSTALL PROPERLY BUT DON'T S POSTER NOT IN THE WORKSTATION

  DEVICE HDD EXTERNAL 2.5 "HDD SATA SAMSUNG INSTALL PROPERLY BUT DON'T S POSTER NOT IN THE WORKSTATION

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• External hard drive not recognized Samsung M2

  Hi all. I can't open a Samsung SD M2 1 TB on ACER PC and seven.  When I go to "computer", it isn't here. If I go into devices and printers, then I see it.  On MAC it is no problem, connection his of he office of EST on the. Please give me your knowledge.

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• Potential new user - several work stations and external hard drive

  Hello

  I am considering the purchase of Lightroom, but wanted to run my script by the group to see if it works for me.

  I have a desktop at home and at work, in addition to a laptop that I use when the place. The laptop is only used to unload the memory cards and do organize basic, not image processing.

  At home, I have a database of image (XnView) that I use to organize my files, and then go to the bridge to convert my RAW TIF files. When I did work on my images, I use Beyond Compare to synchronize my internal image with an external drive. Outside we're going with me both as a backup, but that allows me to do more editing on my schedule for dinner. Any changes to the work is then synchronized to the internal drive to the House.

  At home, the internal drive is designated as H (I use Windows) while the outside is the G drive. At work, when I plug the external hard drive, I put to come as the H drive. In this way, the files of database for XnView, residing on both internal and external, discs are loaded and XnView is none the wiser. OK, so that was a long introduction to my questions...

  First of all, if I use Lightroom, can I use it on multiple computers as long as I use it never simultaneously on more than one?

  Second, if I save the catalog on the internal H drive home, and then synchronize on the external drive, Lightroom to work just start and play these files of database unconscious because it is now an external hard drive?

  Third, Lightroom has a built-in synchronization feature to do this, or I would continue using Beyond Compare to synchronize the two disks until I run Lightroom?

  Thank you!

  Mark

  www.NorthernLight.net

  www.Pinnacle-VR.com

  www.Virtual-Travels.com

  Just to add. I use LR on two machines (sometimes three), there is no problem with the license, there is no activation and LR is designed for the Pro who obviously needs to be mobile. The images in the catalogue are on an external drive. These are also saved on my studio machine. The catalogue is also on the disk external and also duplicated on both computers. and saved on separate hard drives.

  I work from the catalog on disk external when working on the top of the Tower in the studio, or as appropriate on machines borrowed in the field. Some would say that a catalog runs slower on an external drive. While the construction of previews, recording of the xmp data (or in my case direct to DNG) and import are a little slower with the help of an external drive, there is not slowing the work of real treatment.

  It means that I have a general catalogue of all my images which is always up to date. It works very well without any problems.

• Advice on moving 1.5 to SATA 2 HARD drive and put the Samsung SSD on SATA 1...

  My plan is to make a DVD of W10 MS

  Power off

  Unplug 1.5 to boot/storage HDD SATA 1

  Connect Samsung SSD SATA 1

  Turning and fresh install MS W10 on SSD and let it update

  Then, can I plug 1.5 to SATA 2 HARD drive and make it just my storage via disk management?

  What steps/tips to make this an easy transition?

  Paul

  It should not matter if you use SATA1 or SATA2, but there are always exceptions.

  I got a motherboard with two different SATA [Intel & Marvel] controllers with different speeds. It is unusual, so the safest bet is to use the same SATA connector for your new SSD that you used for your old HDD.

  Since you have two bootable disks, you may need to go into EUFI/BIOS and set your boot order to boot from the new SSD first.

  You should be able to access the files on the old drive without problems, but I've seen on occasion where you will get an "Access denied" error due to 'permissions' problems, especially if the original/OS disk has been protected by a password. If you have any questions, you can create a linux live boot disk "to access your files.

  Instead keep you the old drive as is, with an operating system and boot volumes on it, you must backup/move your important files to your new SSD then remove all volumes on the old disk, create a volume, and then format to use as a data/backup drive.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• HP Envy 17 j-007eo Quad: 250 GB Samsung 840 EVO installation in addition to store 1 TB HARD drive

  Hello HP community!

  I was wondering how...

  I heard that people are able to upgrade their quad Envy 17 with SSD 250 GB in addition to store 1 TB of HARD drive.

  Are there difficulties to face?

  I just bought Samsung 840 EVO KIT (250GB).

  Any recommendations would be appreciated

  See you soon!

  Martti

  Yes the reference in the manual is just saying that HP offered with it as an option when new. It does not list what is compatible.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Replacing hard drive Samsung HD103SJ

  I have a Dell Studio XPS 8100 with a processor i5 8GIG memory, Windows 7 Professional (upgrade online after purchase Dell) and a single 1 TB Samsung HD103SJ HARD drive.  Last weekend the Samsung went south.  The disc does not turn and the BIOS can't see it.  My brother-in-law said 'No problem' and proceedes to attempt restoring.  After dozens of false starts, the BIOS settings and a six-pack of beer, he declared defeat.

  I have three questions:

  1 how the BIOS "SATA Mode" should be selected for a single 1 to HARD drive? (I get a new 1 to Western Digital Black from Dell)  All BIOS functions are now on 'default' including the "SATA Mode" in "RAID".

  2. is there a maximum number of times you can use the DVD to install Dell Windows 7?

  3. have Windows 7 Professional installed previuosly will cause a problem reinstalling Windows 7 from Dell reinstallation DVD in the new HARD drive?

  Thank you

  Thanks, I'll use SATA.  I didn't know if DELL had shipped AHCI in their RAID BIOS option somehow for a selection of hard drive.

  I have downloaded the ISO in Windows7 Digital River of www.w7forums.com/official-windows-7-sp1-iso-image-downloads-t12325.html, created a DVD and actually seen the page of presentation of Windows 7!

  All I have left to do is load all the drivers and software.  It is a road I've been down many times before.

  You reference for the download of Digital River has been a godsend.

  Thank you, I apologize for any reference I have that could possibly be to you when I let loose all how DELL handles the problem of lack of HDD Samsung.  I saw how you helped a lot of people in the community of DELL and now I'm one of them

  Thanks again!

• No aero effect. I have a hidden partition on my HARD drive and my clone of samsung software does not work.

  Hello

  I used tune up utility (now uninstalled) and can no longer apply themes - I have try the effect Aero troubleshooting but convenience store says it cannot identify a problem. How can I get Aero goes again?

  2. I am trying to clone my HARD drive through of an SSD, but I have a hidden partition on my HARD drive and my clone of samsung software does not work. Any thoughts on how to work around this problem?

  Original title: two issues with win 7 Home premium

  Hello

  I used tune up utility (now uninstalled) and can no longer apply themes - I have try the effect Aero troubleshooting but convenience store says it cannot identify a problem. How can I get Aero goes again?

  2. I am trying to clone my HARD drive through of an SSD, but I have a hidden partition on my HARD drive and my clone of samsung software does not work. Any thoughts on how to work around this problem?

  1. with respect to the first question: your system files have been corrupted. Do a System Restore before the app was used.

  Try you "tune up", "maximize", "registry cleaners" or any what kind of app that promises to improve the performance of your PC somehow. None of them improve anything, often at the antipodes (as you discovered). Microsoft W7 already has all the apps. you need to keep your PC in tip-top condt. Try not to add anything.

  All these various named apps. are all 'snake oil' and very dangerous to use. However, you will find a lot of 'logic' online promo. material from "authoritarian" sites as to how will be beneficial for your PC. Not drawn in by these Advertorials :)

  2 the hidden partition is probably "restore to factory condt." partition rescue/recovery of the manufacturer of your computer. This can be used for the rescue of PC when things diabolically wrong with your operating system and cannot be set by any other means. You need an ISO image (clone) of the OS partition and MBR (master boot record) only, not the entire HARD drive.  Including the partition of relief are a very good idea but I'm not familiar with the software cloning you use.

  Download Macrium Reflect free edition for purposes of cloning and recovery and make the CD

  image recovery disk. He advises you to do so (by steps in the simple wizard driven) before using the program for anything regardless of whether the image.

  What computer brand and model you are using?

• My Samsung G2 portable HARD drive is unreadable after the scan and fix. Help!

  I am using a Samsung G2 640 GB drive external HARD USB for the archiving of digital photos and music.

  My desktop computer is running that win7 Pro 32-bit. Pentium E6500, 2 GB of RAM DDR3, 640 GB SATA HARD drive.

  No problem, until that the message "Analyze and difficulty" arose one day.

  What do I know? Just a simple user, not a WinGuru, so I allowed him to go forward.

  Now, my files, folders & the Samsung access are no longer works.

  When the USB is connected, I get a prompt that indicates WHAT FORMAT is required.

  Well, I'm not so distraught as to format a drive where I want to save my data, so

  No FORMAT has been done on the drive.

  I tried to run chkdsk from the cmd line, also without success.

  When I right click on properties (the disc appears on CP) it shows

  available 0 bytes and 0 used bytes.

  Why, oh why Windows chooses to give me such pain.

  Your drive has failed, you can try the recovery of third party software, or you can send the drive to a data recovery specialist.

  Msg scan & fix meant that a problem was detected and the software was trying to fix, and obviously he couldn't