SanDisk cruzer edge 1.9 impossible to format

Similar Questions

• SanDisk Cruzer Edge files

  [I saw a thread for this already, so apologies if this is a repeat].

  I was recently bought a key of USB SanDisk Cruzer Edge, and to use it on the computer the first time, I saw a bunch of files already on it. I've included screenshots of them [,[x],[x][x]], and the question I'm really after a response to is - is - it safe to delete them?  

  I want especially to the idea of keeping a bunch of files that I won't always open on my memory stick, but I don't want to really not to take the risk and assume that they are unnecessary and remove them, only to find out I missed something big time. I have never experienced this with other brands of memory sticks, they were always completely empty at the time of purchase, but it's my first SanDisk one. My roommate has the same brand and she too had a bunch of files already on this subject at the time of purchase, but she has not taken the trouble to remove, so I'm not the wiser about the importance that they are

  "is it safe to delete them?

  Yes.

  If you want to be very careful copy on your drive hard and in 6 months or so decide to try copy them the.

• "" Switch USB SanDisk Cruzer 4 GB not format error "Windows could not format.

  Original title: Switch USB SanDisk Cruzer 4 GB will not format...

  Whenever I try to format it, it says "Windows could not format.

  According to the ability that she reads, 64 MB.
  File system: FAT (default)
  Allocation unit size: 1024 bytes
  Oh and I have Windows Vista. I have another flash drive even space and everything and it did not happen to her. All reviews are useful.

  Hello

  Try to format it in Windows Disk Manager.

  See the following steps:

  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the Navigation pane, click Disk Management.

  c. right click on the partition or drive that you want to format and then click on format.

• Impossible to format my Sandisk Ultra Plus 16 GB MicroSD

  Hi, I bought this product about an hour ago from Bestbuy. It was sealed in his case, there is no way, it was a homecoming.

  When I insert the SD card with the inside microSD adapter to my computer, it asks to format the drive. Then the Format Windows removable disk appears and says that my card is 30.6 MB... When I click on Start to get in shape, with the default given the options, it returns back that it is impossible to format.

  I tried the SD Formatter 4.0 card. He says that it is write protected, even if the switch is not in write protect mode.

  I have a MicroSD USB Reader. I tried this way too, and it does not work.

  I would like to get assistance.

  I found my problem.
  As well my card reader USB MicroSD and SD of the laptop slot could not format/read it. I don't know for what reason. But they were a couple of years.
  Today, I bought a new card reader. I could open the drive very well and format.
  Hope this helps some people.

• I bought a 32 GB USB CRUZER EDGE today. I can't use it (RAW problem)

  I bought a 32 GB USB CRUZER EDGE today. I can't use it.

  USB is in RAW format and I can't format it.

  How do I do for change in NTFS or FAT32?

  Bring (or send) back. It must be formatted in FAT32.

  But before you do, just check that the problem is with the drive itself and not your computer by trying it in another USB port and another computer.

• SanDisk cruzer 16 GB - error adding files

  Hello

  I recently bought Adobe C6 and opted for download, rather than discs.  Now that I installed it on my computer, I wanted a return to the top on a Flash drive, just in case we need on the road.

  I picked up a sandisk cruzer 16 GB disk because the total size of the file for the software is 11.1 GB.  I started to copy the files to the flash drive, but received an error that the file is too large.  Okay, so I went back to the USB and formatted to remove all the bloatware that was originally about it.  Judge again.  Get the same error "file too large". I can get 11 of the 12 files on the flash - file player that does not load on it the biggest one of 4.5 GB.

  I deleted all the files on the flash, formatted, once again added the file problem first.  I always get the error message.

  Any thoughts on how to make this work?  Screenshot below.

  Thank you.

  

  Flash drives are formatted in FAT32 which imposes a 4 GB file size limit. You will need to re - format drive to NTFS in order to put a file greater than 4 GB on it.

• SecureAccess for Cruzer Edge

  I recently bought a Cruzer Edge 16 GB of Office Depot.

  This was done after that I read in the characteristics of the product on the SanDisk website that it comes with the SanDisk SecureAccess software to protect the contents of the Flash Player.

  When you try to download the software from the SanDisk site it gave me the following error message:

  "Please run SanDisk SecureAccess from an external device, SanDisk" but on the drive flash is only "RunClubSanDisk".

  Help, please

  you will need to download the app secureaccess since the post stickied at the top of this map. the download is a zip file. You must copy this file zip on the edge of the cruzer. Once the zip file on the cruzer edge extreact the zip on the same drive. then run the .exe from the cruzer edge.

• Strange! SanDisk Cruzer blade 16 GB

  Hello.

  I buy a sandisk cruzer blade 16 GB a week ago. He had worked flawlessly for 2 days, but recently, I copied files of windows 7 64 bit and connect this player to a computer with windows xp. It shows usb not detected and has malfunctioned and blah blah.

  I thought that there is a problem in this system, but I was shocked to see that now it is is even not detected by my pc either.

  After so many tests, I tried to connect it with my keyboard usb port and it has been detected, but that the port is not 2.0 because windows ask me to connect it to a hi-speed 2.0 port.   I thought that the problem has been resolved and I format the USB and then plug it back to my pc. but same problem again and it shows device attached has malfunctioned. but when I connect with the usb port on the keyboard it works very well. However, the usb keyboard that I tied this USB is connected with my usb port on the computer.

  Similarly, I connect this usb with some old marks of Dell systems model Gx optiplex 260 and it has been detected it too much and at the same time not detected by any other pc that stood out...

  Why is this usb detected now only by the usb ports on my keyboard and not by my pc as it was earlier detected by my pc.

  I tried several solution but nothing works even with kaspersky scanner last definition.

  Is there a solution to this problem. I want to connect this usb to my pc 2.0 ports.

  I have intel DH55TC Board with Intel I3 processor of first generation.

  First of all thank you.

  In fact, the usb is defective and I had replaced.

  and Ed if it is the question of power, then how can it be connected to the usb port on my keyboard that eventually connected to the same usb port of the usb to my pc and alternated readers like Kingston and Sony are working well in this port.

  Any ways thanks to you guys for the suggestion.

• SanDisk cruzer flash drive glide does not work on my rt of surface, both are new

  SanDisk cruzer flash drive glide does not work on my rt of surface, both are new. Could not format it rises

  Hi Victor,

  Welcome to the Microsoft Community and thanks for posting the question.
   
  
  According to the description, the Flash Player does not work.
   
  This can happen because incorrect settings in the computer.
  Click on the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly
   
  Answer to us if you are having problems with the Flash Player or any Windows problem, and we would be happy to help you.
   
  Good day!
   
   
  Hope this information helps.

• H:\ is not accessible impossible to format

  Hello

  It's Manu I have 16 GB SanDisk USB key when I insert my USB it showing windows want to format the drive when I clicked it again show an error IMPOSSIBLE to format how I can I solve this problem...?

  Have you tried formatting cmd.

  First try this, type Format H:/q cmd (where h is the drive letter of your)

  USB stick in your case it may be different). It performs a quick format.

  You can also format the key USB by right-clicking Start to go on the computer

  Management then disk management , then you can click right on your

  USB key for formatting.

  If it doesn't not solve your problem, then try on way:

  Right-click on the service Start , and then click the command prompt (Admin).

  Now, in cmd type diskpart , and then type list disk you can see the disk

  number and size to find you which disk is your USB. If you

  don't have not connect another disc Disk 1 then maybe your USB key.

  Type select disk 1 then type Clean . After that, type create partition primary

  who creates the new partition, and then type select partition 1 to choose who

  partition after the category active then format fs = ntfs quick where fs is the

  system files of your pen drive now type assign to assign the drive letter.

  Get out now cmd.

  You can also use the software Hp format or Format usb drive to format

  your pen drive, search it in google.

• Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  Can I use a sandisk Cruzer Blade 4 GB as readyboost for windows XP Home Edition PC?

  You can do this for Vista (and), but not for Windows XP.

  You want to explore other ways to improve your performance? If so, you are in the right forum. :-)

• How to recover pictures on SD SanDisk card 512 MB, which was quick formatted?

  How to recover pictures on SD SanDisk card 512 MB, which was quick formatted under Windows XP SP3?

  The SD card has been affected through SanDisk Imagemate 12 in 1 model number: SDDR - 89 V4.

  The camera was a digital pocket old KODAK cam 4 years... (Sorry that's all I know for the camera)

  Thank you

  P.S. I think remember that names of index files are changed? Is there an easy Undo?

  I haven't used any of them personally, but there is a certain utilities - free - many who claim to be able to recover pictures from SD cards and similar media, even after a format.

  Recuva, which is free, should be able to recover the images from your SD card after a quick format.  Or try this: http://lmgtfy.com/?q=recover+files+from+sd+card

• Oh noes! My SanDisk Cruzer has stopped working!

  When I plug it, nothing happens. I tried my mother's cell phone, my laptop (on Linux AND windows) and a computer at school. The light does not illuminate and the computer behaves as if nothing is fixed. "It's an 8 GB drive that I got from BestBuy.com for $ 15 years black Friday sale, so its about 8 ~ 9 months old." What to do now?

  Oh, and under windows, in Device Manager, it does not list a device malfunction series universal.

  ([A plus = edit]) This: http://www.bestbuy.com/site/olspage.jsp?skuId=8281352&st=sandisk+cruzer+8+gb&lp=2&type=product&cp=1&id=1171672069828 but 8 GB instead of 2. Its the old style one, not the type newish.

  Try here:

  http://communities.SanDisk.com/SanDisk/

• SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

  Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~

  I use the 32-bit Windows 7.

  There is no solution, it is what it is.  However we should not prevent you to make bootable.  Search here and on Google for RMPrepUSB.  It is a utility that can make the bootable disc.

• SanDisk Cruzer power 32 GB has boring secureaccess v2

  Hi all

  I have 5 Sandisk Cruzer 32 GB Force, I will use them to deploy .bin image on my company PC.

  I use imageUSB by the pass mark, to create an image of USB .bin file.

  The problem is, after the process is done and finished checking, no files have been written to USB, what remains is secureaccess v2 file and the exe file.

  What's weird is, the first purchase, the first model of the same USB, works, no problem. I was able to deploy the image to the PC without problem after the creation of the same file .bin for sync USB.

  The rest, than 4 USB ports won't do the same thing, I feel there is some friendly protection I have is in the USB port. Because the v2 secureaccess is keep returning.

  However, I was able to create a Windows 7 bootable inside installation program, no problem. I used Rufus for this.

  Y at - it that someone out there, ever encountered this? I need help.

  Thanks in advance.

  After the USB imaging, secureaccess file and folder are returned.

  I had read that as being a part of the .bin file that you write on the disc.