SanDisk sansa m230 Initialize fail
Hi, I have a Sandisk sansa M230 and updating of software found new firmware for my device. As soon as I installed the update of the firmware, the software told me to remove the usb connection and restart the device. Now it tells me failed to initialize of the screen and not detected by windows. Any help to solve this problem. I don't know why this update of the software ruined my mp3 player which was working fine until yesterday.
Update on this subject. I managed to connect in usb mode and was able to solve the problem. A little hactic to reprogram but good.
Tags: SanDisk Sansa
Similar Questions
-
Cannot format or reset Sandisk Sansa Sport
I tried to erase this player under linux
and then Linux says:
org.freedesktop.UDisks.Error.Failed: error creating partition: helper came out with exit code 1: in part_add_partition: System = / dev/sdb, start = 0, size = 4081057792, type = 0x0c
Entry parser for MS-DOS (offset = 0, size = 4081057792)
MSDOS_MAGIC found
looking at the part 0 (offset 0, size 0, type 0x00)
new entry of part
Watch part 1 (offset 0, size 0, type 0x00)
new entry of part
Watch part 2 (offset 0, size 0, type 0x00)
new entry of part
looking at part 3 (offset 0, size 0, type 0x00)
new entry of part
Analyzer of MS-DOS that exists
Detected MSDOS partition table
schema of table containing partition = 0
I have it
got the drive
Error: Can't have a partition outside the disk!
ped_partition_new() failedThen after that the player says: file system error.
drive format or reset.
Windows will not fit. It detects sandisk as a hard drive, but
won't fit. So it is now frozen.
This same phenomenon occurs with sandisk sansa Jam.
Then I also had the Sandisk sansa clip and it worked
always well with Linux (xubuntu).
It is likely? Thank you
How to get a useless Sansa Clip works again
user XSCD, 16/10/2008
http://forums.SanDisk.com/T5/Sansa-clip-Sansa-clip/need-tech-help-restore-partition-s-filesystems-et... ghlight/true #M8170
- Reformat Sansa Clip flash memory and install a FAT32 file system. You can reformat in Linux using Gparted, but the Clip still won't work because the Clip wants the exact settings that Windows uses when it formats a blank disc. However, reformat the Clip in Gparted will serve to ensure that it will not work absolutely nor be recognized by a Windows machine. So go ahead and this once if you wish. Then connect the Sansa Clip USB2 to a computer running Windows or Vista. Then use Windows File Manager (Windows Explorer) to try to open the drive letter of the USB Windows detected device. Windows will give you an error message saying: the drive is not formatted and offer to format it for you. Choose the FAT32 file system and uncheck "quick format". Then let Windows format the Sansa Clip flash memory.
- Once the Clip is in the Windows format, delete ('remove hardware safely' icon in the system tray, then unplugging the USB cable). Then go to SanDisk.com and download the "Sansa Updater." This application is update the firmware for the Sansa Clips that are already working, but believe it or not, it can also completely restore the firmware and de-structure of directories and files including the Clip needs to run. After downloading and running or installing the update for Sansa, close the program. Then reconnect the Clip on Windows. It must be recognized and the Sansa Updater program may start automatically. If not, then find the Sansa Updater in the start menu, run it and follow its instructions. It will get your Sansa Clip, then download the latest firmware, then restore your Sansa Clip used-to-be-there's no need to Virgin State, approved, completely updated
Here is a link to the software update Clip Sport: FW 1.29
-
Shockwave for Director 12.1.1.151 does not start, just with that. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder. Reinstalled but made no difference. If you can help would be grateful. Thank you.
I restored my computer to an earlier version, installed latest version of firefox and the Shockwave for Director, everything is fine now. Thanks for your help guigs2.
-
Satellite C650-1CR - webcam initialization failed
Hi all
I can't have the built-in webcam to start.
I downloaded and installed the latest version of bios and drivers webcam on toshiba website which invited cam to start to initialize.Now I have an error that says 'webcam initialization failed, please check your device... ". »
The problem is that there is no registration for the webcam on the screen of the Device Manager.
I am at a loss how do I get the webcam to work, any suggestions?Billy
> The problem is that there is no registration for the webcam on the screen of the Device Manager.
Usually the webcam must be listed in the device under imaging devices Manager
In my case it USB video peripheral s it is the Chicony usb webcam.You have marked unknown devices with yellow exclamation?
If Yes, then this is probably the camAs a last option, you can try to recover the laptop using the Toshiba Recovery disk that you have created... If all goes well...
-
I'm under explore 7 and every so often when opeing a third or fourth screen I get an error message in menu bar 'engine initialization failed' page I'm on and then flashes and it is difficult to navigate the page. Any ideas on how to fix this
What version of Internet Explorer you are using? Is this the last an IE9?
If this isn't the case, update IE to the latest version available. -
Satellite L750, webcam integrated - application - initialization failed
I recently got a new Satellite L750 laptop with built in webcam as a gift by my parents, who live in the United Kingdom, so I can stay in touch with them to the Ireland. We had hoped to call each other via video calls, but I can't get the webcam in the laptop for work. I click on camera app Web displays a message saying "Web Camera Application initialization failed; Restart the computer or web camera. »
I have tried to download the driver from the web camera on the toshiba site and have updated the BIOS, but it made no difference.
What can I do to get it working?
I assume that you want to use Skype or some other messenger, right?
For this application, you must not start application pre-installed Webcam. You can even disable the start-up.Can you please check if cam is recognized and listed correctly in the Device Manager and check if some messenger recognizes cam.
Please post comments and we can continue this discussion.
-
Satellite Pro 490 CDT: THE BSOD VFAT DEVICE INITIALIZATION FAILED
Hello...
. Heres a beauty for you... I hope someone can help... here go us.
Loan of laptop to grandson... came back... lots of files were missing.
Managed to get the BIOS with ESC and F1... and got m/c start CD player. with W98 drive inScanDisk fixed a lot, a lot of probs... then to start to reinstall W98.
Stupid me thought that I wonder if he will now start without having to reinstall windows.
Turned on / turned off... now I'm stuck.
Immediately get the bluescreen...
* VFAT DEVICE INITIALIZATION FAILED.*
* A DEVICE OR RESOURCE REQD. BY VFAT IS NOT PRESENT OR IS NOT AVAILABLE. VFAT CANNOT CONTINUE TO LOADING.*
* HALTED.* SYSTEM
Computer portable primer not cd player where the BIOS has been the last value.
Can I not access the Bios with ESC and F1 like last time.
It doesn't matter what I do... I can't get this screen or boot in the bios.I hear the cd drive spin upward with the W98 CD in but still the same blue screen of death with the message above.
If I can't go beyond that message or access the bios... what should I do please? /How can I get past this screen and reinstall windows
I hope you can help...
Thank you
Hello
The fact is that you have laptop for 10 years and I really wonder if anyone here has any experience with this good old classic.
If you are unable to enter BIOS, the situation is quite serious. You may have Floppy drive for this laptop? -
Satellite L300 - T2FTP Windows sockets of initialization failed
After login, I get the following message:
T2FTP Windows sockets of initialization failed
At the same time, the system issues a message that he has found a new unknown device and the driver must be installed.
Before that I did NOT add a new hardware device.
Click the button start only generates a message: Windows Explorer does not react.
It is impossible to call any other routine.Unfortunately I can not find my recovery CDROM.
Are there opportunities to save my system?
Toshiba Satellite L300 model PSLB8E
Windows VISTA-32 bitHello
I never met such a problem. Have you installed any programs recently? It seems that the software related issue. To be honest, it is sometimes easier to reinstall the operating system than to try to fix it.
-
Satellite L350-264: webcam initialization failed
I just bought a new L350-264 (PSLD4E).
Built in web cam worked fine for a few days but now when I turn the laptop on an error says "the Web camera initialization failed.
Please check your device and restart the application or computer.No other information is provided.
I restarted the laptop and tried to open the camera menu utilities Toshiba, but the same error is returned.Can anyone help?
Hello
What do you think of born of the webcam software installation?
Read about the error messages similar here and especially the user could resolve this reinstall the webcam software.The software can be downloaded from the European pilot of Toshiba page!
-
Satellite L350 - Webcam initialization failed
I'm new here so not sure if I'm posting in the right place.
I have a Toshiba Satellite L350 (Windows 7) that I bought in January. Everything was fine until the last two weeks when my webcam suddenly stopped working and when I sign in Dungeon getting a webcam of the message initialization failed, please check your device and restart the computer or the camera.
I went to settings and it says camera works, but it is not. I also have another pop up when I sign saying check Toshiba laptop stopped working (not sure what it is)
Can anyone help please?
Thank you
JanHi Jan,
I had the same question as my webcam didn't work and so I reinstalled the driver for the webcam that could solve my problem. You can download it here:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversBut I recommend to remove the old version first. Then use CCleaner to clean the registry and then you can install the latest version on the Toshiba site.
Toshiba laptop recording you can remove from Control Panel > Add/Remove programs.
Check this box!
-
Satellite L500-1DT: cannot start webcam - 'initialization failed '.
Whenever I try to open my webcam it comes up with the message "initialization failed" and no other information.
Does anyone know how to fix this?I'm not completely computer so simple instructions please!
[Thanks:]
Hello
First remove the software from the webcam installed in the system.
Then, visit the page of European driver of Toshiba and download software webcam for your laptop model.
Unzip the package, and then reinstall the webcam software.Then restart the laptop and try again!
-
Satellite L650 - camera initialization failed Web
Hello
I have a Satellite L650. I got it for a little less than 6 months and the other day, I turned on the computer to find the webcam pop up message saying "Web camera initialization failed etc... "I have also noticed that the microphone in too no longer works.
I uninstalled it and re installed the driver, and it still does not.
I was wondering if there is anyone who can help or has had the same problem?
See you soon,.
Dylan.Hi Dylan,.
You can use the internal webcam with other applications like Skype?
Have you installed the correct Satellite L650 webcam driver?
What operating system you are using?If you have already reinstalled the driver for the webcam I advise to use CCleaner tool. It is a very nice freeware tool that can check your registry for the old registry keys and delete. If this cleaning software nice s to improve performance a bit and solve problems. Just use Google to find this program.
Check this box!
-
ProLiant ML10 v2: SUSE SLES 12 initialization failed on the Proliant ML10 v2
Hello
I'm trying to install SLES 12 on the server above. It seems that the installation is successful. But when reboot the server, I can not go in the SUSA, but get the following message is displayed:
Boot from the local disk...
Initialization failed: press a button to try again.
Any idea?
Thank you
Nicho2016
Hello:
You can also ask your question on the Forum of Support Community Business Enterprise HP - ML servers section.
http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vp0HtuT2bGg
-
How to move files to support 8 GB SanDisk Sansa Fuze player to the computer?
How can I move audio files of SanDisk Sansa Fuze 8 GB Media Player from my computer using Windows Media Player 10? I did it in the past with the previous versioins of Media player, but this version does not offer this option.
Have you checked the web site of Sandisk? http://KB.SanDisk.com/app/answers/detail/A_ID/389
-
Initialization failed: couldn't read the boot disk - Acer C720
Hey guys,.
I really hope you guys can help me. -So I got an Acer C720 and using one of the probably hundreds of tutorials out there, I upgraded the SSD inside. I bought the recommended (MyDigitalSSD SC2 Super Cache 2 42mm SATA III 6 G m2 NGFF M2 SSD Solid State Drive (64 GB)). Anyway, the computer froze today so I pressed and held the power button until it stops.
When I turned it back on I was greeted with the warning. "Initialization failed: couldn't read the startup disk ' ideas? I have a few documents on this subject that I really need back. I put the original SSD inside and it booted up fine, but it won't start using the cotyledon. It's barely 8 months! Any ideas on what I can do? Thank you!
Contact Acer for warranty repair. http://us.Acer.com/AC/en/us/content/service
Maybe you are looking for
-
In the case of Yahoo mail, the OPEN WEB LOCATION box opens for each letter, that I try to type in the line 'To' and/or the 'subject line ' of all new email to someone. I type a letter, the box opens, and I can't type in the window of email anywhere u
-
When I type a word in the address/url/awesome bar it's a word that I know that I used as a tag on several pages of a bookmark, only 4 results in the menu drop-down are marked pages of a bookmark. The rest of the pages in the menu drop-down are other
-
Satellite P200-18Z - need to know the geometry of the disk
I have a Satellite P200-18Z and I do an install of FreeBSD, and I need to know the geometry of the disk because my Installer crashes without obvious reason.In the FreeBSD installation wizard reported an error in the geometry of the disk. null
-
By the way, I have the first Cliq not the XTWhy my cliq switch to landscape automatically in images, videos and the web? Only the portrait all the time. And the update 2.1 here yet?I was looking at the Windows phone 7 HD lately instead of S, the gala
-
signal analog aperiodic acquisition
Dear Sirs, Excuse my English, this is not my mother tongue, but I can't get help on the forum in my language. I have LABVIEW courses are 2 but have not taught on DAQmx acquisition. I use LABVIEW2011, a card/CB68LP connector OR PCI-6229 and I want to