Sansa clip volume problem with 'clipping' or 'pop' - when it is connected to the car radio

Similar Questions

• Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it.

  Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator

  What is the format of your final work? How are you viewing? What version of Illustrator do you use?

  Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?

  Is your type on a layer that is set up to print not? Is your white type and position it to overprint?

  

  

• No sound from the Clip when it is connected to the car charger and car s in the

  I just got a car charger for my 8 GB Clip. I have the Clip connected to the connector of the car aux in, and it plays beautifully this way.

  However, when I connect the car charger, which is a fact by Motorola for a mobile phone, the sound of the Clip completely stops.  There is no sound at all.

  Even if I barely touch the metal of the car charger USB plug to the USB port of the clamp, the sound cuts.

  A ground loop isolator would correct this problem? The comments that I have read of these say all that they helped with motor and alternator noise, but I don't have that.  I have no sound at all, even if the Clip is loaded and he continues to play according to the display of the item.

  I checked the car charger works well because I have a box of jump with a record of 12 VDC (just like in the car).  The cool Clip and plays with a helmet with the Motorola car charger in this configuration very well.

  Any ideas what is wrong and how to fix it?

  Thanks in advance.

  Just for this follow-up, the ground loop isolator completely fixed the problem I had with the sound cutting on my video in the car.

  The one I chose was the PAC SNI-1/3.5 RCA noise filter.  He goes online with 3.5 mm cable to the and has a socket on one end and a plug on the other.  It would have been cool if he had just had two male connectors, because then I could have plugged one side in the Clip and the other in the input of the car Jack.

  There is no significant deterioration in the sound, and now I can load the Clip while listening.

• Problem with sending a message when you're connected via Wi - Fi

  Hello. Still getting used to my Dext (owned it for about 4 days). I noticed this morning that I can't send the mail from the POP3 account, I set up on my Dext when I am connected via Wi - Fi - when I try I get an "authentication failure". When I disable Wi - Fi email sends end. There is no problem with webmail - send although I am connected to the Wi - Fi or 3 G network.

  Anyone know how to send the mail while POP3 on the Wi - Fi network? Thanks in advance...

  Understand the problem - port incorrect settin for mail server outgoing. Changed to 587 according to some messages that I saw during a search - that did the trick!

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store

  What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• How can I return to 6.3 4.0 I have never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  How can I return to 4.0 3.6 I've never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• What are the Causes of 'loop Hang"problem with file i/o when using timed multiple loops on one OR cRIO-9012?

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  I experienced a problem with an application. I think I've isolated the problem in the "Timed loop question - Source Code.zip" attached source code. A detailed list of my results are in the attached document "Timed loop detailed question - Results.docx.

  Overview - it seems to be closely related to the IO files and the use of "Timed loops" on the OR cRIO-9012

  1. If I activate the e/s in two loops, then two loops crash simultaneously

  2. If I activate only the e/s in a loop, then only this loop crashes

  3. If I activate the e/s in two loops and make a 'While' loop earrings, then it don't crash

  4. If it is wrote nothing in the file I/o, then it don't crash

  5. If the reference to the file is left open instead of opening and closing on each call, so it don't crash

  6. If I try to run it on "My Computer", then it don't crash

  7. If the IO is only activated in a loop and programmed to wait for one second between the file access, then it always crashes

  In my real application, any given row is only writing (at least) once a minute, but I couldn't still my application to plant within a period of 24 hours by writing a single error of a single loop once per minute, with a low CPU use. It was the impulse to test the seventh point above.

  It seems that the best solution was to open the reference to the file and let it open. I think it is a good practice in general and I'll do the update in the application. This should solve the problem, but it is very difficult to verify this due to the sporadic nature of the question. As such, I'd like to understand what was causing the problem so I can verify that it was fixed. So far, my attempts to create a single, coherent theory able to explain all aspects of this issue have failed.

  I just wanted to know at all that there has been a request for corrective action (CAR #214156) has filed for this issue to be fixed in a future release. This seems to be a problem with the VxWorks operating system, we use in real time. We have additional cRIO chassis which have a Pharlap OS where it does not work. For now, you can search for this CAR ID notes to see if this problem has been resolved for publication in the future.

  Currently, there are two solutions, we have identified for this problem:

  1. open the file before the loop and close it after. (recommended)
  2 perform file i/o in a normal loop and transfer data to a queue.

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with clicking and scrolling when you are using the mouse in IE

  Separated from this thread.

  Original title:

  Problems with clicking and scrolling when you are using the mouse

  I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

  Hello Fred,.

  Thanks for the reply.

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and then follow the on-screen instructions.

  If this does not help, then use method 2.

  Method 2:
  Start your computer in safe mode and check the number.
  Refer to this article:
  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key...

  I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key. How will I know about the activation key if I don't have the CD? and he really gets on my nerves because very 15 minutes it would display the message that I need to activate the key making delays in my work.

  Hi Kia,

  We apologize for the inconvenience caused to you.

  I wish you contact the Sony Support to reactivate the windows because it's preinstalled software.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=FAQ

  Please reply with the status.

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.

• Problems with Adobe Flash Professional CC (CS6 too) to save the animated .gif file or .swf file perfect

  Hello

  I have a problem with Adobe Flash Professional CC and CS6 to save the animated .gif file. This is a very simple work with logo. But I can't save a perfect swf or gif file, and that's bad news for me. Logo .swf file record with bugs. Bugs just see then file to insert in the page of freeshop. This is just example of test page, it allow you to see the bugs of logo - http://tagraseshop.graphicsrim.eu . Here is the actual page, but it's not my, freeshop with old logo is and I corect it - http://www.tagras.lt

  .Gif absoluted anime file not saved in Flash CC. Just the gif image. And why? My Windows 8.1 operating system.  In fact, I try to register on Adobe Flash Professional CS6. It is not save too...

  GIF "animation"- https://mega.co.nz/#! D8pEVaRR! LK4 ahNfhg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT
  SWF with bugs- https://mega.co.nz/#! jo5lSRyS! 1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ

  FLA -flash document- https://mega.co.nz/#! C94nCDSS! 7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA

  Perfect animation speed is here- http://e-shoptagras.graphicsrim.EU

  Who can help me?

  Any ideas?

  Thanks for your help in advance!

  But when I download the SWF logo in the page http://www.tagras.lt, it is always visible with bug, flash on it. I don't create it like this, why it is done that way? (Why SWF logo flashing/load?) ( http://www.tagras.lt look at the main title on the left).

  Thank you very much!