Sansa Connect Wifi Options

Similar Questions

• Sansa connect WIFI

  Can you tell which can really do with the WI - FI connection, and what I can't.

  Thanks for your reply.

  The Sansa Connect is stopped, there will be more updates to the firmware.

  In Flickr, you can see only your photos and 50 "photos of the day" (the last time I checked, in any case).

• Fall of connection WiFi Envy23 TouchSmart

  My WiFi connection is down one or two times a day on my TouchSmart Envy23.

  The first time I'm reconnecting is always when I first connect to the computer in the morning so I thought it might be something with one of the power, sleep or hibernate modes, which is at the origin of the material lose the connection-layout.  I checked that I use the most recent driver WiFi for my Ralink RT3290 802.11bgn and no other devices connected to the WiFi lose their connection.  I also checked the power mode does not turn on my card into sleep/hibernation mode.

  I ran Win 8 with the problem, that I upgraded to 8.1 win hoping to solve the problem, but it didn't.

  I have two network connections in my office: the Ethernet card is connected to a private network (DMZ with public IPs) and my WiFi is connected to our private network (ADSL modem) via DHCP.  My Ethernet connection do not show signs of a problem and I'm not sharing files or using the PC as a bridge or a gateway between the two networks.

  Any help would be appreciated by stopping the disconnect from the WiFi connection.

  Hello jrowley,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your computer guard lose its connection throughout the day and that you have changed the operating system and it still occurs. The problem you describe seems to be a physical problem, and I think it would be best if you contacted technical support HP for repair options.

  United States supports Contact link options HP products purchased in the United States.
  Outside WE support link to connect with options for HP products purchased outside the United States.

  I want to thank you for display on the HP Forums. Have a great day!

• Follow this procedure when the Sansa Connect recovery tool does not work!

  Hey people;

  This thread is just to consolidate the info from a lot a longer wire, earlier.

  Currently, the Sansa Connect recovery tool may or may not work for you.  You can see an error like 'failed to connect to the Internet' or "cannot retrieve the device, SanDisk contact technical support for assistance."  If Yes, it's probably because the recovery tool is unable to download the firmware images he needs zing.net.  SanDisk has not (yet) recognized this problem.  The strange thing is that * sometimes * recovery tool works, if you already have images of the firmware on the drive... but usually it doesn't.

  So here's what you do (with thanks to Larlos for providing the firmware images and order lines to their installation).  This assumes that you're 'stuck' to the "necessary recovery" post on your connection.  If not and you are in the regular menu of Sansa Connect, first follow steps 2 and 3 in this paper: http://mp3support.sandisk.com/tools/connect-recovery-instructions.pdf, do the following:

  (1) download the zip file containing the images of the http://www.megaupload.com/?d=UNLDGZ1N firmware

  (2) search for the following files in the zip file, and then copy them into the directory of your drive "C:\Program Updater Connect Device Recovery\cmdline":

  • everest_initrd_ext_prod_1.1.1.50239.SRR.e
  • everest_vmlinux_ext_prod_1.1.1.50239.SRR.e
  • yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e
  • yeverest_zap_ota_rel_ext_prod_1.1.2.65799.SIG

  (3) in the same directory, create a file named recovery.bat that contains the following three lines:

  zsi_fw.exe w everest_vmlinux_ext_prod_1.1.1.50239.srr.e everest_initrd_ext_prod_1.1.1.50239.srr.e

  zaprecover.exe t 600000 f yeverest_zap_ota_rel_1.1.2.65799.tar.gz.e yeverest_zap_ota_rel_ext_prod_1.1.2.65799.sig

  pause

  (4) connect your Sansa Connect USB.

  (5) run the recovery.bat file (double-click it in Windows Explorer, or run from a DOS command prompt).  The line of 'pause' is there only so you can see the results of running if you run it from Windows Explorer.  Expect the recovery to the end; at the end of that your connection will restart.  If Windows displays the hardware wizard detected during this process, simply cancel the wizard.

  whturner wrote:

  Thanks for the help - it updated my white box to connect to the WiFi and after registration on Yahoo (without choosing any service, just updated my old email and user ID) I now INet radio with a number of stations that work fine on my home wireless network. To do this, DND to explore and syncs with WMP OK. A few quirks that I wonder about.        (1) after the firmware update, my ZAP showed that 1.2.0.58335r and OS = 1.2.0.58835 - NOW (the next day), it changed to ZAP = 1.1.2.65799r and 1.1.1.50239 = OS. Every thing seems to work even though; I have a firmware download while I was playing with the INet radio?     2) there is also a new menu item "Server Zing" that lists the name of the module, the version, and the primary and secondary server. Is this normal?  (3) what Yahoo service I - I see a small Y! symbol at the top right of the screen.                                                                                                                                               Thank you very much and congratulations Warren

  (1) no; you see the version numbers are associated with the files of the firmware (names starting with "everest" and "yeverest" files) that you have either downloaded when you ran the recovery tool, or download in megaupload.com zip file.

  (2) Yes, it's normal.  Zing is the company that allows you to manage authentication of audio stream and firmware for the connection.

  (3) the Y! symbol indicates just that when you use the Internet Radio feature, you are streaming audio of Yahoo (in fact, now owned by CBS Radio).  There is also a function of Flickr photos, which is associated with Yahoo.

• How to connect WiFi Toshiba 40l5435Dg

  I wanted to know how I connect wifi with a toshiba 40l5435Dg and how you can improve it

  It is a TV...

  What do you want? a liquid cooled flat-screen?

  you better not TV...

• Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.

  Hello

  I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the screen and displays the network list) by clicking on the network down button to the right of the screen. I have to restart my laptop to connect again and after 5-7 minutes, I lose again.

  I have tried many suggestions on the amendment to the Plan of power for maximum performance and uncheck "Allow the computer to turn off this device to save power", but nothing seems to work.

  The network driver is Intel Centrino Wireless - N 2230. I have also updated the driver and off Bluetooth and ethernet as part of suggestions found on the web.

  I don't know if it is a problem of Windows 8 / Intel / HP. Help, please.

  Nadeem

  From my own research, if you have an intel centrino N - 2230 network adapter and use 8 64-bit windows, you need a new driver. This adapter has connectivity wifi which are known for problems intel. Check here: http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm and then contact an HP tech via chat and they correct Web site, download and install the new driver from intel. I tried to do it myself, and it did not work. The technology did for me by online chat and remote assistance. Do it for what they tell you it's a hardware problem. It's a problem of network adapter that requires an updated driver. Let me know if it works for you.

• Possible PC portable HP Pavilion 15 15-e090se to connect WiFi 5 GHz?

  Hello

  I just want to check if possible PC portable HP Pavilion 15 15-e090se to connect WiFi 5 GHz?

  No. E3Z44EA3ABV

  Thank you

  Ajdee20

  Hello

  Go to Page 6 in this manual:
  http://h10032.www1.HP.com/CTG/manual/c03939658.PDF

  All the compatible wireless adapters listed for your model in the manual are adapter single band and operates on the 2.4 GHz ONLY band.

  Go to Device Manager and expand network adapters. You will see the names and model numbers wireless adapter.

  If the suffix of the wireless card description ends in bgn, then this is the only map of a single band (2.4 GHZ). If it ends in abgn or agn, then this is a wireless card dual band (2.4 GHz/5.0 GHz).

  Computers in most portable consumer HP are equipped with single band card.

  You can use the dongle USB wireless adapter Alternatively.

  Concerning

  Visruth

• Iphone4S unable to connect wifi... Help...

  I just bought my iphone... everythings so well... at first, wifi reacts to my wifi at home, then all of a sudden, it turns out... its been two weeks since i can not connect WiFi or even join wireless network.i have read tried them all to connect, but really cant. Ive already has resstart parameter and all... Please help.and thank you in advance.

  Hello Dissed.thanks forever you answer. Ive been thru all the procedures you mentioned before that I came here to find solutions. As I said b4, all perfectly healthy... I have my own wifi here in my house and I connected my iPhone so it's automatically activated when I'm home. And in the décor, free Wi - Fi is always on... abt join network too. So, if I am outside, wifi notifications automatically showed where are wifi network connections. Dissed I am very grateful for spend me your time and tried to help me. God bless you and take care.thank you

• Sansa Connect 4GB

  I recently bought the sansa connect 4GB.

  Well, it looks good, but I can't find the drivers on the Web site

  I tried the recovery of connection device, sansa updater installation and update the firmware

  but nothing works...

  before that I installed these, the system began reading from the device when it is connected to the usb port.

  but after that they have been installed to the system just stopped the reading device

  I'm frustrated by relly

  V.J.R. wrote:
  also... can I use monkey media rather than wmp 10 or 11?

  You can, but only after you make sure that you have a DPW facility on your system.  MediaMonkey installation does not install the MTP.  For PSG installed, you need to install WMP 10 or higher.

  There are also installation separate PSG only packages, but I can't vouch for any of them.  Maybe someone else in this forum can.

• Sansa Connect (4 GB)

  Mint Condition Sansa Connect for sale. It has 4 GB on-board memory and can accommodate microSD cards. Comes with box, unused earphones, usb cable and pouch. The last firmware update. Looking for $110. Photos on request.

  Since the Forum rules and terms of accreditation:

  • No display of points of sale or advertising without the consent of the administrator.

• Sansa Connect User Guide

  Hello, I am fairly rudimentary and just bought two Sansa Connect for a very good price in a white box.  The box contained no any Quick Start Guide or user manual.  The messages that I found in this forum about the User Guide lead to links that no longer work.

  I have no idea how to move music from my computer to the Sansa Connect, although I understood how to maneuver in one menu defined in the other.

  In "Models of retirement" section, the San Disk support site does not appear to list the Sansa Connect, mentioning only the Clip, the "rocket" and the point of view.

  Can someone help, please?

  TIA for any assistance.

  In this case, you want to:

  sansaconnect-qsg

  SansaConnect-userguide_en

• Sansa Connect and Windows 7

  I have windows 7 and wmp 12. I just bought a connect, and I can't connect it to the computer at all. It appears in Device Manager as code 10 device could not start. Ive looked all over for a solution, please help me. I bought it and now I can't put anything on it

  Do a search for "Windows 7" across all forums of Sansa:

  http://forums.SanDisk.com/Sansa/search?submitted=true&q=Windows+7

  There was a lot of messages about problems using various Sansa player in MTP under Windows 7 mode.  The Sansa Connect does MTP mode.  You may find your answer in one of these threads.

  In addition, code 10 can occur on Windows 7 when a USB port cannot supply the power required by the device.  Try other USB ports on your computer, especially those on the rear panel.

• Sansa Connect mp3 Bitrate

  I just want to know if CD encoded in higher than 192 Kbps bitrates can play on sansa connect? for example, I use to encode my music on VBR or 256CBR Kbps for best results.

  Thanks to advice and sorry for my English.

  Martin.

  Yes, many of my MP3s were bought from Amazon.com and are 256 Kbps or higher.

• Software BlackBerry Blackberry link does not connect WiFi but mixture

  Hi all

  I can be alone at this moment, but I can't connect to the link using the WIFI in my passport.  I've updated and fact uninstall several times.  I bought my passport in the spring of last year and it has been a struggle since then.  When I first set up the Link software it was fabulous.  It connected quickly and repeatedly throughout the day.  I could transfer files to and from my PC using my PC or my passport.

  As time has passed, I had to uninstall and reinstall the software Link several times so he could work on WIFI.  From 13/08/16 today I uninstalled and reinstalled the link again and although I can connect by USB connection WIFI connection does not work while the mixture is done with WIFI.

  I disconnected the net and turned off the firewall.  The WIFI connection worked once but failed a second time.  In addition, the Passport will be connect to and surf the net via my virtual wifi.  I find it very strange as time has passed the liaison WIFI feature from excellent to difficult and inoperable.

  Here are the details:

  I use Windows 7 pro Service pack one

  I use a Microsoft Virtual WIFI Miniport Adapter

  Windows Firewall

  Microsoft Security Essentials antivirus

  Passport for Blackberry with OS current starting from 13/08/16

  BlackBerry Desktop Package downloaded and installed 08/13/16 after uninstalling and cleaning registry.

  Thanks in advance for the help given.

  I used mixes both the link because I disabled the protection in real time to Microsoft Security Essentials for a week. I was able to connect with reliability on WIFI and cellular phone network. This seems to have done the trick.

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d