Sansa :(:(:(lights

Similar Questions

• Sansa e260 will not light

  My sansa e260 lights.  If I connect it to my computer or docking functions fine... it is only if it is not connected to anyting that turns any.  I get all the lights or any type of answer from him when I hold the power button

  Could be your battery does not have a good connection or he is dead as the proverbial nail holder. When the drive is connected, which shows the battery indicator? Is the bolt of lightning driven falshing? The battery icon to see the green or white?

  You can check the connections (and review any corrosion on the terminals) by removing the 4 screws on the back. Make sure not to lose them in the carpet, because you can not just go out and buy more from your hardware store. Remove the back and lift off the battery. It slides just in & out as a cell phone battery; nothing to merge or unplug. Discover contacts spring and look at the battery casing for any signs of leakage or corrosion.

  But you will also have the chance, even if you do not notice something out of the ordinary. The simple procedure to remove the battery for a short period of time and then replace it actually ensures a system of re - configure on the device, it can be triggered just for you after reassembly with no indication as to what was wrong.

  If you determine that you have a bad battery but or don't want to risk buying a new to try it you can find them on Amazon.com or eBay.

• New Sansa e260 will not light

  Hello

  I just got my new sansa e260 and after it loads for a day and a half, it not light. I tried to hold the power button for a long time, but it would not turn. When connected to a pc, it says 'connected' and shows that the battery is charging. I can browse files, etc. However, if I unplug the PC, it goes dead.

  I tried to update the firmware, but it fails. I changed the settings of the MTP to MSC USB device with no luck!

  Any idea what's going on? All the solutions out there for this issue?

  If you just bought the camera, it is often simpler to contact the vendor for an Exchange, as most have a return policy that covers just this kind of question.

  Because it is often faster and more convenient for the customer, SanDisk recommends this solution first of all, in the interest of you up and running quickly.  The retailer can then send the device to SanDisk on their end.

  The process of return of SanDisk is great, they pay even the return shipping costs.  The only downside is that it can take a few weeks (total).

  Bob

• Sansa clip lights, be recognized by the pc or the load?

  OK, I bought my mp3 player on the 2nd o this month and I went to put on today after just yesterday and it lights... so I try to load it and it does not recognize my pc. What makes it unable to load by the pc. I have a gigger in my usb charger Tremblay and which does not load... and he did. everything worked yesterday! im still waiting for an answer from sandisk about what to do now. I can't take back at the store since its past 15 days return policy! So im very irritated. everyone has ideas on how easy to get this supported by the guarantee or what was wrong with players out there that won't turn on. Thank you

  Same thing happened to me an hour ago. The documentation that accompanies the device says of "slide up and hold the button for 10 seconds.» Then turn on again. "Tried to him... and IT WORKED! I hope this helps.

• Sansa Clip lights if the load

  Hi, I got my Sansa Clip in 2008, and about a year later, I have it lent to a friend of mine. She told me that the next day she thinks she accused it too because now it does if it is supported. I tried to reset it up to two minutes, but it is still not running. If I load it, it turns on but shows only the recurring Sandisk logo and the image of the home and a computer with arrows moving between the two. This also happens with my computer when connected it is recognized and I can check the music files and all, but it turns off immediately when I get disconnected. I did this on and off for the past 3 years. A way to solve it myself or get it fixed somewhere?

  Sounds like the solder on the battery leads joint broke. It's a common disease of the first (original) Clips. It's probably just a coincidence that it happened the same time you he lent to a friend.

  If you are of the adventurous and handy kind with tiny son and a soldering iron, you might be able to fix it yourself. If not, transfer all your music out of her (if she is not already saved on your computer, which should be), recycle responsibly and get a new one.

  His replacement, the Clip + is a wonderful and worthy descendant. Better than the original in my opinion.

• Sansa Fuze is not compatible with Rhapsody/Windows 8.1?

  Finally, I replaced my old laptop XP with a new with WIn 8.1.  My two (2nd gen.)  Rocket (no +) devices load OK, appear in Rhapsody as being authorized and allow the transfer of securities with subscription. But once disconnected the two devices think the tracks of the expired subscription.  Rhapsody has this message under Tools > device compatibility report:

  Device for Sansa Fuze 8 GB compatibility report:
  This PC reports that it performs "Microsoft Windows Version 6.2'."
  Transfers of securities of subscription to the devices is not supported by your version of Windows

  Titles that have been imported from CDs play fine. Someone here can shed light on what is happening?  Is is time to reformat devices?  Much thanks is advanced.

  Well, well, well. For all those who might find this thread with a similar problem in the future, I think that I just solved it my problem with the help of the Rhapsody site troubleshooting tips.  It is reset course the Sansa device clock, regardless of it's:

  Asked synchronize the device

  -Reset the clock secure your device
  1. go to the Rhapsody software
  2. connect your MP3 player to your computer
  3. hold the CTRL & SHIFT key on your keyboard and right click the player icon
  4. click on Reset secure clock

• Sansa Fuze stuck on the white screen after disconnecting.

  Once I unplugged my Sansa Fuze on my PS3, it got stuck on a white screen. None of the buttons worked and I couldn't turn it off. I decided that the only thing I could do was to let the battery die and charge it again. Finally, he died and I plugged it in, it loads to full is the same thing. So I tried again, except I only left it plugged in for a while and disconnected. My music has arisen and it seems to work, but it stops immediately by the lack of power. Now no matter what I have plug in, it lights at all. I connected it to my computer and installed the drivers for it, but the rocket itself did not come, and the computer says it has malfunctioned and pilots have not been recognized. So now I can't listen to my music or anything like that. Help?

  Drag the spring-loaded power switch in the highest position for 20-30 seconds. (note that in extreme cases it can sometimes it may take a minute). Release and see if it boots normally.

• My Sansa Fuze 8 GB MP3 player screen is white!

  My sansa fuze 8bg mp3 player is to have a white screen which is tormenting the buzz of life outta me! He can still play music, but I'm getting tired of it... can someone help me? I didn't reset all the songs that I put in!

  I don't think it's my drive hard because it's awesome so far. Also, I found a way to not "reset" all my important files and 'help' with you 'IkTech09 '.

  If your sansa fuze 8 gb screen is as white as the clouds, follow these steps to get rid of this siteeuation:

  1. connect your mp3 player to the computer

  2. you see the white screen (duh!)

  3. press the power button and wait for her to stop

  4 press it again until it lights up

  5. then you will see the Welcome screen again

  that should help you and if you already got rid of your mp3 player, I am ashamed that you've wasted your money and did not try something that might have helped your mp3 player working again.

• Sansa has changed your packaging?

  I begin to doubt the sansa clip + I just bought to be false. The inner plastic box is not sealed and seems different. The packaging is the data connector is still pink. And there is no CD.

  Wanted to contact customer service, but live chat is closed today. Could someone shine some light on the situation? Thank you very much in advance!

  I guess that any manual def of blackmarket must be that it is illegal. But what they do is certainly not illegal, which means don't violate any law. Not in their country. Nor in any country, SanDisk has presence in. The units are imported from these countries of sale officially after all. If importers are in breach, the exporters would first be prepared to break the law to sell them. Since they all break the law, then the markets would become "blackmarkets", meaning that no one could claim the legal or moral highground. I guess it must be my argument.

  Largest market? Well, that's easy. Use your imagination.

  Just received an official response from the CS. posted here so that anyone with the same issue may have reference:

  «About your request, please be advised that, as far as we know, all the plastic inside the box case should be sealed.» In this case, we recommend that you contact the retailer or distributor where you bought the product to have another investigation on why the plastic case is not sealed. »
   
  Thanks for all the inputs. Problem solved, by none other than SanDisk itself.

• Sansa Clip + doesn't turn on

  I need to know how to get a replacement for my Sansa clip.  It was purchased through Amazon on 2.19.14.

  It lights when not connected to the computer.  It remains quite dead.  It lights up when it is connected, and it is recognized by the computer.  I am able to transfer files when it is connected to the computer.  As much as I know it was not dropped or damaged.

  I tried things.

  I tried to reset the player several times.

  I tried to reformat the drive

  I plugged in the charger and left more than 2 days.

  I have it plugged into the computer and he left.

  Always as soon as I disconnect the computer it goes completely dark.

  http://www.SanDisk.com/about-SanDisk/contact-us/

  http://KB.SanDisk.com/app/rmaform/session/L3RpbWUvMTQyMTUyMjEwMC9zaWQvamE0S1JIY20%3D

• Sansa e250r broken

  I formatted my sansa e250R and by mistake I put big alocation in size and now every time I connect it to my screen of PC lights up blue and I have to remove the battery to turn it off. There is no way to Flash the memory of something like that to reset the whole device?

  Have you tried The Recovery Mode and the sansa.fmt trick?

• Light is not bright enough

  Got my new Sansa Clip this morning, I plugged it in 10 hours and the battery indicator indicates a full charge.  I adjusted the brightness level as high as possible and there is not enough light to see if I turn off the lights in the room.

  Also I when the title of the song is scroll, I can see the Sansa and vaguely computer icons in the context where it is difficult to see what is the title of the song (or other).

  Is this a defective item?  He came from Amazon.

  I returned it to Amazon this morning.  He has been very low yesterday, today it disappeared completely.  My replacement should be here tomorrow morning.

• Sansa Fuze 8 G is no longer grateful SanDisk external memory and locks upwards if I try to used.

  I have a G 8 rocket and recently bought a SanDisk 8 GB Micro SD HC.  I had loaded movies and music on the SanDisk via Rhapsody map.   Everything worked fine until a few weeks ago.   My PC no longer sees the external memory through Rhapsody or my counter top.  In addition, if I plug in the card and turn on the "rocket" - it freezes and won't turn on.

  In reading the comments, I have tried the following with these results:

  Re formatted Fuze - still does not recognize external san disk card

  settings changed to PSG - no change of pc or rocket

  changed the parameters of meteorological service of Canada - no change to detonators - pc show an "external drive" additional but unable to do something - States "insert disk" when selected in my computer.

  Not sure if it's the Sandisk 8 gb card or the "rocket".

  The "rocket" lights up normally without the card inserted?

  And you are sure that the card is at bottom, clicked in?

  Can you see if something else will read the card - a cell phone, a camera, your computer through a drive?

  When I had this problem with my rocket I ended up re-formatting of the "rocket", which you say you did.

  You could also put at level or downgrade of firmware by following the instructions in the manual in the Firmware update note: just get the file (if possible x.x.26), unzip and place the fuzea.bin file in the directory root (the Sansa drive letter). He will say that it is the firmware update when you disconnect.

  http://forums.SanDisk.com/Sansa/board/message?board.ID=sansafuse&thread.ID=33874

  And Yes, it could be the card. And it could be the card slot - which is what I thought that my problem is that when I formatted.

  If one is the problem, you will have to replace the broken hardware. But that's what I thought I would have to do until the Format and the fixed firmware my friends, so don't give up yet.

• Sansa Fuze does not turn. * Officially solved! See post 7 in thread for answer! *

  OK, so I put a video that I made using the Sansa Media Converter. I made the video in one. AVI using SUPER and put the file in SMC. I waited on hidden. I'll be back and conversion was hung and stopped at 74. It wasn't a huge deal. It's happened before. I decided to come back in a bit to see if it continues the conversion. When I came back, my drive was off and the percentage bar had not moved. I removed the player and tried to turn it on. It turned on and "refreshed media." Immediately after, however, it stops immediately. I tried a soft reset (button / waiting for 15-60 seconds) and he came for a few seconds only to stop again. More funny thing is though, it actually stopped by itself. He even went to the screen 'goodbye'. Now it won't even turn. He lights and turn off by itself. Sometimes I can turn on soft reset, only that it is black screen. Even when I plug it to my computer, it will be either turn on, black screen after a few seconds or not at all.

  Player: Sansa Fuze 8 GB

  Computer OS: Windows XP SP2

  Firmware: 1.01.15

  Please, I beg you. This will be my second player perfect condition which has out crapped on my Sansa. I had an e2600 who had a hard drive failure after only 8 months. If I have a solution that States "buy a new player", I'm afraid I have to leave Sansa.

  Any help will be greatly apprieciated.

  Very well. I think I finally found the problem of this. The problem seems to lie in the SCM. It seems very harmful effects if during a conversion process, the computer transfers to virtual memory. An update of the firmware seems to correct this problem. Again, I will never video convert on this computer.

  I'll give this time, Sansa. Is not your fault.

  thread

• Sansa Clip color issue

  This may seem like a strange question... but does the Sansa Clip 2 GB pink light/baby?

  I see online is the hot pink.

  I found one for sale, used, but in the image, it's a very light shade of pink. I asked if it was the actual color and not with a blanket, and they said that it is the color of the device.

  I don't want to be caught, but also do not want to pass on a good deal.

  Thank you!!

  There are 2 shades of pink, and one is a very light shadow, as you describe.