Sat Pro L10: LCD screen and market off button / stop

Similar Questions

• Satellite Pro L10: USB on and goes off when I try to use the USB modem

  I have a mobile broadband usb t-mobile I want to use it on my Satellite Pro L10.
  When I attach to one of the usb ports then the laptop it is, but it loses then every 10-15 seconds (without interruption).

  I'm on XP Pro and usb Sockets work very well for a USB and a printer.
  I also tried to fix via a hub with external power usb and a pcmcia card with usb port, with exactly the same results.

  It works perfectly on my wifes laptop, it seems to be a conflict or a software problem.
  I flashed the bios and updated as well as seems relevant that I can.
  I continue updating the drivers etc, but in the meantime, I was wondering if anyone had any bright ideas?

  A healthy idea of mind is considered, it is starting to drive me up the wall! Mike

  Hey Buddy,

  T-mobile USB broadband have you? I mean if you could tell us what model you have maybe we can discuss it further. By the way: you said about your wife the USB - stick works machine. What operating system your computer laptop wife´s have?

  Would be interesting to know these facts; either by the way, I think it s more programs given that your material seems fine.

  Would appreciate feedback of your regarding your question.

  Greetings

• Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive.

  Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive. Each screen is blurred during the installation. Managed to get

  It is installed. A great until I had to reboot after the installation of windows updates. It starts with the first good looking for Windows 8 logo then

  the monitor turns off and the computer is still running. Reset and I get the windows repair screen. Sometimes, his clear and sometimes

  its blur. I have a motherboard Asus M2N with a Nvidia geforce GT 240 video card. I'm guessing that the windows install 8 pro and pre of initialization

  use some funky video drivers before windows loads the correct nvidia drivers. Microsoft needs to do a better install disc that allows to display the

  graphics correctly. Windows8-UpgradeAssistan does not really check very good material. I ran the windows 8 developer preview and it

  had no problem. Y at - it a hope?

  Hi SteveSimmons,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you install the latest drivers from Nvidia geforce GT 240 for Windows 8 from the link below video card:

  http://www.nvidia.com/download/index.aspx?lang=en-us&ptid=1&PSID=52&PID=0

  I hope that the information above helps you.

• white dot on the camera LCD screen and photos?

  I have a older (5 years) camera digital kodak (my first) who suddenly shows a white spot on the LCD screen and the pictures during playback on the PC and printing final.

  I tried different Speicherkarten, blowing and clean the viewfinder and other openings in the camera with no result.

  This means - it's time for a new camera?

  Is this a common problem with digital cameras?

  
  

• Satellite Pro U300: Low resolution on external LCD screen and a station

  I've got Satellite Pro U300 and LCD HP1907v and PA3542E-2PRP - docking station.

  When I connect external LCD for laptop - resolution is OK (1440 x 900). But when I connect the external LCD display in a docking station - the resolution is lower(), I can't change it, and I don't have some display options under Fn + F5 (that I had when I passed this lcd directly to the laptop).

  Help me find a solution, please!

  Yes. Latest Dynadock software must be installed.
  I checked the hardware specifications of the dynadock with DVI-d port and DVI supports a maximum external resolution UXGA (1,600 x 1,200) 24-bit.

• Sat Pro L10 - loss of display Num/Caps Lock indicators and Volume level

  I have a few problems at the moment...

  First of all, some time ago, the volume level display (a green light that came on the screen) disappeared. I got said that his was due to an update that had to be done, but who for some reason any got rid of the screen. Short take off all updates, is it possible to get this back?

  Second, for the shift caps lock and number lock lights stopped coming. The lighting of the screen to show that the hard drive is written to still works, but just two others next to it (shift caps lock and number lock) has stopped working. Is there a reason for this as an update, or is it just that the bulbs have gone?

  All responses welcome!

  Hello

  With regard to the notification of on-screen volume control;
  This notification of volume level is controlled by software. Possibly Microsoft updates affect this notification and, therefore, it doesn t appear on the screen. I presume that some registry keys have been changed, but I put t know exactly what entries likely to be affected.

  With regard to the second question. illumination of the keyboard;
  Well, it's usually nothing to do with the software installed.
  I think it would be a mistake to keyboard, but it's just my personal suggestion

  I put t know how long the operating system is running on your laptop but it might be appropriate to update the operating system to ensure that the new facility can help to get rid of these questions.

• Problem of backlight Satellite Pro L10 - the screen is very dark

  Hello

  I've got a L10 Pro of the Satellite with a backlight problem - the screen is very dark.
  How can I confirm if it is the backlight themselves who have failed or the backlight inverter Board?

  Also, can someone point me in the right direction for a copy of the workshop manual?

  Thank you very much!

  Hello

  As you have said that this problem could be linked to the failure of inverter FL and in most cases, the FL inverter needs to be replaced.
  It's a little bit complicated and it s not desirable to try to replace it to your own hand as this may damage the screen of laptop computers.
  This is why I would really recommend contacting a Toshiba ASP because of two important reasons:
  First reason is that you can order the ASP compatible FL inverter and the second reason is that an ASP could provide help how to replace this part.

  If you want to know where and how he placed s then you can visit this page:
  http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

  Of course, this page shows only the wow of instruction to remove and replace the Satellite A105 FL inverter, but the procedure is not very different from the Sat L10.

  But like I said above; If you have no experience don t do anything, which could damage the laptop!

• Sat Pro L10 - its two continuous tone unusual

  My L10 Pro Sat has begun to emit a two-tone sound. This continues when the speakers are turned off, and even when all sources of energy are removed (sector and battery). Any ideas what is cuasing that and how can I stop it.

  Hello

  I am very interested about your case, but I really don t understand you not at all. Two tone without feeding sounds. It's very strange. I guess that your unit is fairly new and the warranty is still valid.

  On this path, it is really not easy to give you some explanations. In my opinion, you should contact Asp and they should check the device.

• Sat Pro L10 DVD Super Multi Drive

  I have a new Satellite Pro L10 with DVD Super Multi player running XP Pro. I was not able to write on the DVD player - either it does not recognize the DVD in the drive or it blue screens and crashes when I use the Windows backup installation until I read the error message. Now I get very nervous, I could not support the 6 weeks I got it...
  I can play the pre-recorded (of movies) DVD in the drive and it can read CDs and some brands of DVD. The manual is singularly useless on the use/troubleshooting of the Super Multi drive

  Hi Christine,

  I don't think you can use the Windows backup to record directly to CD or DVD. The following is an excerpt from the Microsoft web site: -.

  • .......... Unfortunately, the Windows backup utility cannot save files directly to a CD - RW disc.

  Have you tried the software to burn DVDs. I think that you should have Sonic RecordNow and Windvd.

  HTH

• Satellite PRO U500 - LCD screen size is reduced

  Hi all,

  I have a Toshiba Satellite Pro U500 with one small problem, the size of the LCD screen is reduced. I have a white border to the right and down. The max resolution is 1024 x 768.
  The problem is visible also when I enter the BIOS, so I think that the problem is not Operting System drivers.
  Is there a solution to my problem? I have to send in the audience?

  Thank you for the help
  Giuseppe

  H

  It is really strange, especially if you see the same thing in the BIOS settings?
  Since when did you notice this behavior?
  Do you use pre-installed OS original you got with your laptop?

  Have you done something that may be responsible for the issue described?

  I U500 and default display resolution is 1280 X 800 t, so I understand why you have 1024 X 768 on your U500.

• Sat Pro L10: Disable the wake on lid sensor

  I have a Satellite Pro L10 and disable all power on/set off the power of the actions that occur when the lid is closed - that's very well under windows, and I have disabled things sur-cloture in the power supply of the control panel section. BUT in PARTICULAR, I want to disable the automatic turning on when the lid is opened (i.e. a Bios or other material toshiba parameter). Where can I do this?

  Hello

  I think that light will be activated if the device is in stand-by or hibernation mode. If you open the cover, the device starts automatically.

  If the device turns and you close the lid that nothing will happen if you defined any action. I think that just display will be switched off, but after opening the lid he display will be activated immediately.

  Auto lights up when option doesn t open cover exist.

  Good bye

• Sat Pro L10: Cannot install printer

  Hello

  I have a portable Satellite Pro L10 and have had problems to install an HP photosmart 7350 printer.
  After installation if I try to print, the computer indicates a failure to print warning. This printer works very well on my main computer that is running windows 98. So I tried a brand new HP PSC 1610 with the same result.

  But when I tried a friends HP Jet 5500 desktop it works very well. I tried to reinstall the operating system using the restore disc that came with the laptop for each printer has been tried with a new installation every time. Has anyone else had this problem and managed to solve it?
  Any help would be appreciated.

  Thank you
  Tony Jones

  Hello

  Unfortunately, I never heard talk about this. But I don't think it's a problem of unity because another printing works correctly.
  In my opinion, you should check the printer drivers.
  If you have problems with printer drivers, try to use the original OS drivers.

  Good bye

• Sat Pro L10: built in WLAN issues

  Hello

  I am using the inprocomm WLan on a new satellite Pro L10 running XP Pro with Windows zero configuration disabled.

  I have 2 routers netgear acting as access points, with several other wireless devices work well.

  I found a few problems:
  local network utility does not define the WEP key at startup (and does not work with reliability of boot).
  You cannot run the utility except if connected as an admin user.
  profile settings not retained "broad machine", only by the user.
  the support inprocomm website does not appear to exist (www.inprocomm.com.tw).

  most are small problems, but the lack of reliable startup is a major problem. I had an another toshiba I got before reliable machines, but this feels like the beta test software.

  the drivers are up-to-date (even if it is not updated on the web site of toshiba, and pilots were dated 2004)

  Anyone got directions on how to do it?

  I spent a day of evil and cannot do this work anyway for a non admin user, and must always start manually for work at all.

  Stephen

  Hello.

  I m unaware of this key WLan card because it s are not a product of Toshiba but
  I found a site with Inprocomm WLan drivers. Please check for this possibility.
  http://list.DriverGuide.com/list/company3145/

  Do you have accounts for different users on this device?
  I think that you need the appropriate permissions for all users.

  Good bye

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• T510 with dock: can I use a LCD screen and a TV high definition?

  I am setting up this configuration for my boss using Windows 7.   Basically, it is three monitors, an extended desktop.  The laptop screen is 1 monitor, Samsung LCD screen is 2 and I just connected (using the display port) a Panasonic HDTV.  So, he wants to use all three and be able to drag windows on all three.  All three show on display properties, but I can't seem to get the HDTV to work.   If I 'disconnect' Samsung LCD screen, I can get the HDTV to display an image.

  If I use two LCD screens, I can make them work.  HDTV just won't work with an external LCD display.

  Does anyone have this same configuration?

  Thank you

  Joe

  If you duplicate the monitor then they must be on the same resolution.