Sat SA60-672: Issue of Hub USB with SP2

Similar Questions

• Issues peripheral conectivity USB with my MP4 connected to USB

  When I connect my MP4 into the USB port, I used to be able to delete and add music to it very well, but now he does not even recognize that MP4 is connected to the laptop. I've been on the troubleshooting on the sign that says any problems detected with Intel ICH9 Family USB2 Enhanced Host Controller. In the extra detail part, it is said that Windows has stopped this device because it has reported problems (code 43) what should I do about it?

  Hi Vampire355,

  ·         Did you do changes on the computer before the show?

  ·         You are able to access the other USB devices?

  ·         You get the error message?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Try to use the USB device to a different USB port and verify.

  Method 3: Try to use the USB device on another computer and check if the problem persists.

  Method 4: Uninstall and reinstall all USB controllers, follow these steps:

  (a) click Start, type Device Manager in the start search box and press enter.

  (b) expand Bus USB controllers.

  (c) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (d) restart the computer and reinstall the USB controllers.

  (e) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  For reference:

  Tips for solving problems of USB devices (Applicable to Windows 7)

• Hubs usb network fall randomly network

  original title: I have 2 Iomega Iconnect network REPEATER MULTIPORT usb with 4 hard drives

  the problem is that they work perfectly for a few days then I started having problems with one or the other falling out of the network, not only a hard drive but the whole hub sometimes restart the pc works, but it still doesn't work I reset the hubs by iomegas, help guide and who does not always either someone has answering this delima I attribute data that I really wouldn't lose.

  Thank you all

  Hi Randy,

  1. how many computers are connected to your network?

  2 you are trying to access the IOmega IConnect by wire or wireless?

  3 are all computers on your network running Windows 7?

  a. please specify example: Windows 7 Professional 32 bit.

  4 to this problem with a particular computer or all computers on the network?

  a. please indicate whether it is a simultaneous issue on the network or on a single computer at a given point of time only?

  Please post the requested information for a better understanding of the issue.

• I have some problems when connecting my hub USB for Windows 7.

  Original title: Windows 7 & PnP...

  I have some problems when connecting my USB hub (this is PnP)...  I don't know Don t what the issue with windows 7 and PnP´s, but I ´ve read some info about it on the net saying that peripheral soe Pnp will not work on windows 7... So, what can I do?

  Hello

  1. What is the brand and model of the computer/hub USB?

  2. what happens when you plug the USB hub to the computer?

  3 - is it is not detected?

  4. other USB devices work?

  Response with more information to help you further.

  The hardware which are not compatible with Windows 7 will not work with it. However, almost of hardware and software are compatible with Windows 7.

  Step 1:

  See if the USB hub is compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Step 2: Run the following fix - it:

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• It's 2016, but find a hub USB 3 seems difficult.

  It's 2016, but find a hub USB 3 seems difficult.

  Guess I'm of an age where I need grandchildren to send a few years so that they can longer hold the technology of their grandfolks...

  Have spent time not a little online shopping for a usb hub powered to an iMac that reviewers find reliable and - this is the problem that I don't have the knowledge to understand - will support an auxiliary hard drive without cutting into the speed of the drive. I am a bit taken aback that people report problems of reliability and compatibility here in 2016, and even less accurate recreation the USB socket at the back of the iMac via a hub powered and wired to a few inches apart.

  Recommend a product?

  Very grateful.

  I have a powered hub Plugable (bought on Amazon). It's USB2 but I remember it being a USB3 version with reasonable comments.

  I think that people are more likely to write a comment if they have a problem so exams can be negatively biased a little.  I read the reviews, but I also analyze them.  A bit of any product may encounter problems for one thing, I'm looking for, that's how the company manages these products.

  Another thing to keep in mind is how the hub is intended to be used. If someone posts a bad review because they tried to load 8 iPads to a hub powered at the same time, well I think you'll be lucky to find a hub that can do.  Hubs can have many ports, but the power supply is usually limited and not designed to provide full amperage to all ports at the same time.

• Hub USB no longer works on IMAC

  This has happened twice now. I bought a powered USB hub gear and it worked for a few weeks then stopped working. I bought a different model, a new, and he also worked for a few weeks and then stopped. I tried to reset the SMC, and I think I have done correctly, but that no longer works. I tried to plug the buh on another computer and it worked fine- but not on the Mac. What is happening here. Any suggestions?

  The first thing to try is to do a reset SMC 2 - 3 times back to back with all the perihpherals disconnected. If this does not work then it may be one of the devices connected to the hub. You should try to see if it's a device by trial and error.

  If all else fails I would swap your gear for one of the hubs USB Belkins. I've never had a problem with one of my friends.

• SA60-672 DVD - RW will not read the CD

  Hi, I have a SA60-672 system with a carpet * a dvd - rw drive UJ-811 t, the reader can read a DVD Ok but can not see any format CD (music or data discs) - tried uninstall & reboot but still does not work, any help would be appreciated.

  Thank you.

  Hello

  Well, it seems that the drive is broken. In my opinion the lens calibration doesn't work properly. But it s only my suggestion.
  In my opinion, you should contact Toshiba. I put t see any other possibility

  Good bye

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• HP laptop laptop 15-ay019tu: shortcuts keyboard and HUB USB 3.0 driver is missing, I can not find anywhere then please provide some suggest

  I tried to install drivers in my new pc and I almost did. But I can not find the driver HUB USB 3.0 (that is listed as "unknown device").

  Another problem in the function keys. They do not work. So I need to install the driver of access keys

  I have tried many on the internet until now, I can't able to find drivers for my computer so please suggest a useful site to download the two drivers.

  Hello:

  For the question USB 3, download, unzip and run the file setup.exe from the link below.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

  See if installing this software gets the Fn keys to work.

  This package contains the HP System Event Utility, which allows the special function keys on the laptop to program models. For example, HP System Event Utility allows users to press the Fn + ESC keys to view system information. This package is provided for the supported models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp76001-76500/sp76383.exe

• Tecra 8000 - hub USB 2.0 does not

  I need a help. IA´ve had Hi - speed USB 2.0 Notebook card
  22932 http://catalog.Belkin.com/IWCatProductPage.process?Merchant_Id=&Product_Id=1

  but still, I installed all the drivers oryginal CD it does not, as a USB 2.0 but everything also USB 1
  I have Tecra 8000 with 366 MgH processor, 6 GHG's hard drive, I use Windows XP Professional with SP2.
  Anyone know what could be the problem?
  Thank you

  Hello Mad

  In my view, this question must be sent to Belkin. AFAIK for maximum performance, computer system, peripheral and software must all support Hi-Speed USB.

  On this map, I have gift logo see Hi-Speed t.

• Satellite A100: Parallel Port to USB with Vista printing error

  I have a new laptop Toshiba A100 with Windows Vista installed. I can't make my printer A3 HP works via USB with a USB/parallel cable.

  Vista recognizes the connection and says driver installed. Try to print, and it just says: "error" Vista will not let me load the driver supplied with the connecting cable. Anyone got a solution for this?

  Hello

  Are you sure that the driver that came with the connection cable was designed for Windows Vista?
  I assume that the driver is compatible with early versions of Windows like XP.

• Toshiba Satellite SA60-672

  I'm looking to make my laptop Toshiba Satellite SA60-672 wireless to the internet and all that, but I do not know what card choose (PCIMIA, mini card or something) and read another post theres supposed to be a button on the right that you can move to turn on and off, well, you can see where its meant to be , but you cannot move it: S

  Can someone help me?

  Thank you

  Benji

  Hi Benji

  In my opinion is the cheapest solution and the best Installation of Wireless PCMCIA card is very simply and you don t need any switch. Look for information on the diversity of wireless cards.

• PCAN USB with NI-CAN adapter

  Hello

  I intend to communicate that LabVIEW with a controller to motor through the CAN network by using an adapter USB-PCAN system Peak. I wanted to know if NI-CAN be able to send and receive commands through devices that are not National Instrument (in this case, it will be the USB PCAN-adapter of the system Peak). Can anyone who knows something about this topic help out me please?

  We used the PCAN USB with the LabVIEW RIDGE driver provide. I don't think you can use NI-CAN or NOR-XNET to talk directly to the network using the PCAN USB CAN but we use the conversion functions of NI-XNET to convert between the CAN messages and signal/data value and vice versa, and then use the driver PCAN LabVIEW for read/write messages.

• Disable AutoPlay of CD and USB with XP Pro

  It is possible to:

  Disable AutoPlay of CD and USB with XP Pro

  How is it made?

  Greetings from Jørn Rudolph to the Denmark

  It is possible to:

  Disable AutoPlay of CD and USB with XP Pro

  How is it made?

  Greetings from Jørn Rudolph to the Denmark

  Sorry about the quote lol

  but here ya go

  • Click Start
  • Click on run
  • Enter GPEDIT. MSC
    The mmc group policy will appear. On the left panel:
  • Double-click Computer Configuration to open the submenu
  • Double-click Administrative Templates to open the submenu
  • Double-click system to open the submenu
  • Double-click autoplay Turn off option that will be near the bottom of the list in the right panel.

  The default value is not configured. Set it to "Enabled".

  The credit goes to www.windowsnetworking.com
  hope I helped :)

• How to make Ghost Bootable Usb with Image

  I Want To Creat Ghost Bootable Usb with picture please tell

  Thank you

  Hello

  Please follow the steps mentioned in the following article to make a USB bootable for ISO image:

  http://www.kapilarya.com/Installing-Windows-8-beta-using-Flash-drive

  Hope this helps, good luck :)