SATA drive install

Similar Questions

• Satego X 200 - 21U - where to find the XP SATA driver for install XP

  I have laptop Satego X 200 - 21U with installed Windows Vista.
  Where can I find the driver for SATA drive so I could install Windows XP?
  HARD drive is Hitachi hts 541616j9sa00.

  Hello

  The SATA driver is part of the Intel Storage Manager.
  You can download the Storage Manager Intel since the European driver Toshiba page.

  The package contains the F6hlpy folder that contains the files needed for the SATA.

  These files must be included for the Windows XP CD using free software called nLite.

  Google for nLite to get and find more details.

  Good bye

• Satellite A300 - need driver SATA to install Windows XP

  I changed my OS winXP SP3.

  After reading a lot of posts, I finally installed my new operating system but with SATA compatibility mode. I tried to change again in AHCI mode, but every time I tried Windows hangs at loading. I also tried to install Storage Manager after installation of the OS, but it fails. So I decided to change the XP disk, including the SATA driver, but after downloading all the drivers on my computer I can't find the SATA driver.

  Can someone tell me where is the .inf file?

  Thank you to

  Hello

  Firstly it is not possible to change the compatibility mode to AHCI after installing Windows. You can only do before installing XP, otherwise you get a BSOD.

  However, if you have downloaded the Storage Manager you must extract the files from the .exe file. Open a command line and type the following command:
  ' - A - a - PC:------'

  After that, you can copy the inf for external floppy drive files or integrate it into the new XP installation disc.

• install SATA drive for dell optiplex 170L

  Cannot install a new SATA hard drive in Dell Optiplex 170 L.  Windows XP Pro SP3 cd cannot find the hard drive. Need help please.

  Hello

  This problem is related to the installation of the equipment, I would suggest you get in contact with the system manufacturer for assistance that you need the BIOS (Basic Input Output System) Setup to install the new Windows XP SATA drive. Will also need you a floppy drive to install the new SATA drive.

• Suspended at the end of the installation of Vista (pre SP1) - Sata drive problem - how do we install?

  Hi, my Dell Studio Hybrid desktop is hang on installation (new installation on a formatted hard drive) from Vista to the installation step ends.  After much research it seems that it is a matter of pre Vista SP1 associated with SATA drive/drivers.  Installation crashes because the computer is looking for a driver on the CD-ROM that is not there.  Anyway I don't see a driver relavent in the cross-section of the hybrid (another computer have drivers under the SATA drives) and if I did I don't know when to add it (load the section of the driver during the installation process?).  Any help on this topic and how to proceed with the installation of vista would be much appreciated since I just lost my weekend to this.

  Hello

  You are right that there is no drivers sata on your computer because you don't have that one hard drive go in the bios as described here .and put AHCI to IDE

  Integrated Peripherals

  Allows you to enable or disable these integrated devices: HD Audio, Onboard LAN connector, Onboard LAN Boot ROMand side logo. Serial ATA Configuration can be set in IDE or AHCI mode.

  then install your version of windows you should have no problem now.

  Good luck

• Problems after installing the second SATA drive in Windows 7

  I just install a second SATA hard drive in Windows 7. Currently, I use only a processor AMD Athlon X 2 4800 with 3 GB of RAM, Windows 7 64 - bit, installed on a 400 GB Samsung SATA drive and have two (a pioneer and a Liteon) DVD burners.

  System worked fine until I put in the new drive. Previously, I had hung as such discs: SATA1 was the existing 400Go drive, SATA2 and 3 were two DVD burners (don't ask me why, I have 2, will remove one of them, if that's the problem).

  Installed the new HARD in the SATA4 drive. Booted up, saw the new drive in the BIOS, but Windows does not see it until I went to disk management, a drive letter assigned and formatted etc. Also, I swapped the drive letters so I had all of the HARD drive (I have my 400 GB split into two readers via the partition) and C: D: E: F: and G:, DVD players.

  Started, began to transfer data from D: to the new E:, and Windows crashes. No message error, everything freezes. Need to reset, and then allow Windows to check for errors etc. Return to Windows, same case again. I swapped the SATA cables so that SATA1 and 2 are the HARD drives and SATA3 and 4 are DVD players. Reboot, same case.

  What I am doing wrong? Or what should I do? I don't even have to start the transfer of data I just let WIndows running for 2 minutes and it automatically hangs again.

  If someone could help me as soon as POSSIBLE please, it would be fantastic. Thank you!

  I've been in contact with the provider, and Yes, that will take it back for Exchange. They gave me some ideas to try first, I'm going to do tonight; They asked me to check if the HARD disk is running on series complete ATA (SATA) mode and to enable the DMA if he asks me to. Otherwise, they said, try the fail-safe mode. Don't know if any of them are currently enabled etc but will find tonight.

  All else fails, I take that back! Simply means a 3 hours trip to Melbourne to make...

  Thanks again guys for your help.

  Michael.

• I want to install a SATA drive in my Optiplex gx270s.

  I have an Optiplex gx270s (3.2 Ghz) with two internal HD IDE my boot drive died and I noticed two internal SATA connections.  I want to install a SATA drive as my boot drive, pretty easy.  But I've never worked with a SATA disk before and I saw different configurations (7200, 7200.10, 7200.11 10 000 rpm and 1.5 Gbps & 3.0 Gb/s).  Which of these SATA drives will work in my system?  I tried to find the specs on Dell with no chance, former system.  Any help would be appreciated.  Thanx

  Message edited by broowk on 05/10/2008 20:54
  
  

• Help install a double layer DVD SATA drive

  Just installed a dual layer SATA DVD drive in my Dimension 8300.  It is the second DVD drive installed.  It came with the SATA cable that I have attached to the motherboard's SATA connector.

  But when I check for the installed hardware, I don't see the original DVD drive.

  I know I can it's okay because the drawer will open and close properly.

  I also double checked to make sure that the SATA connector is taken in the DVD player and the jury firmly.

  Do I need to install the drivers?

  Sorry, just of knowledge about the inner workings of my computer.

  Thank you! : bravohelen:

  
  

• PE R510 of the SAS addition to the installed system with SATA drives

  Hello

  We have a server PE510 that came with 2 drives 2 TB SATA 7.2 k and a Controller PERC SAS 6/iR.   The servers of the machine as a SQL server (its original purpose) and later on, a busy file server.  The file server role was not originally intended for this machine.  What we are seeing is very bad I/O bottleneck during daily use, although only about a dozen people access to this server.   (I got the system extracted by pressing more than once).

  I wonder if replace drives with SAS will help solve this problem.  There are 6 empty bays on the system.

  Would I be able to add 3-6 SAS disks to this system (in addition to the installed SATA disks), in order to create a new RAID volume and move the files to it on SATA volumes?   The existing SATA drives are in a RAID1 volume.

  Thank you

  Thank you

  Mauricej74

  I wonder if replace drives with SAS will help solve this problem.  There are 6 empty bays on the system.

  Replacement by SAS will probably help, but your bottleneck is your controller, not your type of disc.  There is no easy way to migrate a Windows installation of a SAS 6/iR to a PERC 6 / i, but if you were to move the PERC, you will see a substantial improvement.  The other problem is that, because you can not mix SAS and SATA disks in a virtual disk, you would have to do a backup/restore for the SAS VD (you would not be able to rebuild a SAS drive in the existing table to replace one at a time).

  Mauricej74

  Would I be able to add 3-6 SAS disks to this system (in addition to the installed SATA disks), in order to create a new RAID volume and move the files to it on SATA volumes?

  Yes, you can add the SAS drives for the system and more SATA drives.  Note, however, that 1) the SAS 6/iR controller only supports 2 virtual drives, while a VD can be added, and 2) the SAS 6/iR controller only supports RAID 0 and 1, would be so the only way to add disks "3-6" in a RAID 0, which leaves your data at extreme risk.

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Qosmio G20 no longer works after trying to load the SATA driver

  My qosmio g20 was working until I loaded a driver sata intel (f6flpy).
  Now the lights are working but no attempt to access cd or hard disk etc.
  Is there a way I can reverse the procedure or reinstall drivers chipset etc I guess I corrupted?

  Hello

  I think that you have installed a wrong driver!

  The fact is that the Qosmio G20 supports RAID functionality and you must include the RAID driver and not the driver SATA!

  The RAID driver can be found on the European driver Toshiba page!
  Please choose your model of laptop (right series), download the RAID driver, install it instead of driver SATA and follow along with the Windows operating system installation.

  I think this should solve this problem.

  I'd appreciate some feedback from you!

• Satelite L40 - 17U: Sata driver WinXP

  This problem is not that hard to fix, but I'm looking for the driver but I can't find it. And don't tell me to go to the page for downloading drivers for my L40 - 17U because I was there and you get not only the driver that I am looking for it.
  Each driver else I get the it. So help me through the Please this problem. I formatted my laptop which has vista home basic on because I want to install XP Pro.
  Now the thing is my laptop says "drive not found" I know how to solve the problem. Here's the method (you need a CD in Windows XP Sata driver for your laptop to XP, the program nlite and a clean CD):
  Take a CD of Windows XP and the program nlite to integrate driver sata + XP files from the original XP CD on the own CD.
  The process is not that difficult, but you have all the software and drivers for your laptop for Windows XP. The driver, I'm fighting for is the sata driver. Can someone help me know where to find the sata for my L40-17U dirver - please?

  Here are the specifications of my laptop of neede to get the driver for xp sata:
  model No.: PSL48E-02P031ZA
  Processor: Dual-Core T2330 1.6 GHz

  If you need more information please let me know and I will it provide.

  Post edited by: chvw1987

  > And tell me to go to the page for downloading drivers for my L40 - 17U because I was there and you get not only the driver that I am looking for it.

  I put t think you know what you're talking about.
  I've visited the European driver of Toshiba page and yes I checked the L40 PSL48E and YES download area I found the SATA driver!

  Intel Storage Manager contains the necessary SATA driver!

  As you suggest, you can create a new Win XP CD and could include the SATA driver to this page using the nLite.
  It of not complicated and gentle

  Recommend to check this

• Satellite A300D-15B - need for Windows 64 - bit XP SATA driver

  Hello

  Someone has drivers SATA for Win XP 64-bit for Satellite A300D-15B?

  Kind regards
  Ganesh

  Hello

  As far as I know this laptop Satellite A300D-15B was equipped with AMD chipset and therefore the SATA driver should be part of the ATI graphic driver.

  But you can also install the Win XP without the SATA drivers.
  In the BIOS, you will need to set the mode SATA from AHCI to compatible.

  Then you should be able to install Win XP on this laptop.

• New hard drive installed in W530. Is not found, are not, not recognized?

  Just installed a second hard drive in my W530. I removed my CD drive and replace it with:

  ThinkPad 9.5 mm 4K 1 TB hard drive II (5400)

  plugged into a:

  ThinkPad SATA Drive Bay adapter III 12.7 mm

  Followed all directions, off battery power, removed.

  When powered on I can't find new hard drive anywhere. Not in my computer. Where is he?

  I even updated my BIOS to ensure that it was not if.

  Please help. Greatly appreciated!

  Back to manage and format?
  Also make sure that he gave a drive letter.

  All of this should also happen in the previous wizard, however.

• Intel ID1E5D sata driver for Windows XP

  Very good day to all the users of this forum for help, just buy a computer hp 1324la 1000 laptop that came with windows 7, for reasons of my work that I need to downgrade to XP SP3 is why I turn to you for helping me find the SATA driver as when do the insalacion launch the blue screen...

  Like the other informarcion of data, I leave the CPU - Z program that throws me this information.

  Ivy Bridge Intel chipset

  ID1E5D Southbridge Intel

  Beforehand, am very grateful for your support and hope to resolve this problem soon greetings...

  You are the very welcome.

  Use the drivers that I attached because this link are outdated and those for your chipset are not there.

  You can try the 4540 XP hardware drivers of HP Probook s except the audio player and card.

  Audio: Accept the contract, download and install the first pilot shown in green.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  ... First card reader driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false