Satellite A100-289: after 5.1 Bios Update powerfault on usb device

Similar Questions

• Satellite C660 - Freez after boot - corrupt BIOS update 1.7

  The Satellite C660 had start-up problems: freezing screen after startup and very, very slow. Also a HARD drive recovery did not help.

  I tried an update of the Bios and loaded the downloadable file that at Toshiba (version 1.7). The Bios update has not completed and now the laptop does not at all.

  The warranty is void, I now buy a chip of bios in China and I'm looking for now the bios file.

  It's all them very disappointing and a large size of time and money.

  > The Bios update has not completed and now the laptop does not at all.
  That s it Plains really looks like the module ROM was not properly flashed.
  I think it's a problem with the hardware, since you had problems before the update of the BIOS.
  I think that affected the procedure for updating the BIOS.

  > As the warranty is cancelled, I now buy a chip of bios in China and I'm now looking for the bios file.
  Forget it mate ROM module cannot be replaced in most cases the module ROM must be flashed with a disc of crisis

  Would recommend asking a Toshiba ASP for help and reflash the BIOS using the disc of the crisis.
  This should not be very expensive

  By the way: have you seen this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Last updated by Satellite A100-289 with a new CPU and additional RAM

  Hello. Sorry for my English in advance :) I have a laptop Toshiba Satellite A100-289. Despite I am satisfied with the laptop, it is possible for me to update, so I have a few questions on this topic.

  Fact laptop support Modules-SO-DIMM 2 GB of RAM? Also, what mobile CPU is supported for upgrade? Is it possible to replace the Core 2 Duo T5500 (default), with a few other Core 2 Duo processor, such as T7400, T7600, T7700? And if I install a new processor, it will influence the energy consume and warming temperatures drastically?

  Thanks :)

  Post edited by: mister yetti

  Hello

  with regard to your question: Yes you can.
  Usually your chipset is capable of a maximum of 4 GB of RAM, but due to the limitation of the slots (Slot 1 cannot handle a 1 GB module), you can move only to 2 GB maximum, because your machine has only 2 slots.

  And what with your CPU? You can certainly try, but you won´t have a lot of luck. Excluding the small fact that each machine has it s own system of cooling for the processor which is equipped with this machine.
  the won´t CPU run at full speed.

  Why not? The problem is and now speak from experience;) that when you replace the processor in a processor intel pentium M or Core(2 Duo) system, something in the bios change, then the new processor
  will not properly recognized. And then the old? Nope. After you swap the CPU, you will have to bring your machine to an ASP.

  They have software that reactive something in the BIOS and the CPU runs at full speed. Since then they to the ASP will notice that you tried to Exchange something in the Board of Directors,
  you will face a cancellation of the guarantee and you will have to pay for everything that happens to be broken after the revocation.

  So I propose: update your RAM, but don t touch your CPU.

  Have a nice weekend

• Cannot install driver LAN/WLAN on Satellite A100 - 289 PSAA9E Win XP

  Hello

  I installed Windows XP on a Satellite A100 - 289 PSAA9E, but I can not install the network and WLAN page driver drivers.
  I always get the message that no driver regrets were found (I manually chose the directory with the downloaded drivers)

  Can someone help me?
  Where can I get the right drivers network controller vor and WLAN card?

  Hello

  As much as I know Sam A100 PSAA9E series supports Intel 3945ABG wireless card and also an Intel LAN card.
  Driver WLAN can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  On the European driver Toshiba page I could find drivers for Satellite A100 PSAA9E series.
  But note; You must choose the Archive in the type of product because it old series.
  There are two different LAN drivers;
  -LAN driver v 9.2.24 for Ethernet Pro1000
  -LAN driver v 8.0.43.0 for Ethernet Pro100

  In order to check both!

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• Black screen on the Satellite A100-712, after Bios Update

  I bought a new Satellite A100-712 and I did a bios upgrade, everything was fine in windows and restart the laptop got it is pasted on the toshiba black screen that appears when you turn on the lapto.

  Any suggestions please, I would be very grateful

  It doesn't sound good. I did the BIOS update on two laptops A100 and everything was OK. Sorry, but I think that you will not be able to do anything alone. I recommend you contact the service authorized in your country as soon as possible.

• Satellite A100 does not start after the wrong Bios Update

  Yesterday, I upgraded my BIOS of 1.90 to 2.20 for VISTA... now, apparently, I downloaded the BIOS bad a100 to my A100 (PAAS...)

  Now the computer turn on (no display) then a few seconds later stops offshore and turns on again (without interruption), I am under warranty (and the computer is in the store) but I was wondering what to do if Toshiba is not honor the warranty?

  Thank you very much for your help!

  Hello

  I'm sorry to say, but it seems that you don't have the choice.
  You can ask him authorized partner in your country for the help that I know, BIOS update errors are not covered by a warranty and you will have to pay a small fee for fixing.

  In the worst cases, the motherboard must be replaced:(mais peut-être avez_vous une évasion chanceuse et seulement la puce ROM doit être flashée à nouveau)

• Satellite A100-920 - after updating the BIOS, it does not start

  Hi all

  I've updated the BIOS of my laptop to V6.0 (excerpt from the Toshiba site) then Windows XP and it went well, then Setup wanted to restart the PC.
  But restarts, he won't have in the startup process. I can not access the start menu, or anything else by clicking F2 or F12. But could go the detailed process by clicking on escape. And there I see the following messages:
  
  Phoenix TrustedCore (TM)
  V6.0
  Version.Mak - r1.53
  detects the dual core [email protected]

  No TPM or TPM has problem.
  1023 M system RAM passed
  

  And that's all.
  I can not get older versions of BIOS, and I couldn't find the version of the version 6.0 update that I could put on a CD for an another BIOS update.

  Anyone has an idea on what is wrong? And if you find that it's to do with version 6.0 and I need a previous version, please could you send me the installation files that are necessary to do the update via a CDROM.

  Thanks for your help.

  It is unclear to me that you can do the BIOS update using CDROM. The BIOS updates are designed to be done under operating systems. Old traditional updates have been a little different.

  In any case, it seems that the BIOS chip is damaged. I can imagine this downgrade can help but where to find the old version. I know you can get it from the authorized service provider. they have access to the database of Toshiba and they can download the old version of the BIOS.

  The download page is just the latest version available.
  Contact the nearest service and ask for help.

• Satellite L40 - 14 H - do not start after the successful BIOS update

  Hello

  I have Satellite L40 - 14 H which was working fine until I thought to an update of the BIOS will not hurt. Seems I was wrong.

  I downloaded the update to the BIOS, it unzipped in a folder and started the action.

  After a few seconds was asked to wait, and then after few more firm.

  After the reboot, I pressed F2 to enter the BIOS and check that it is version everything was fine, version 2.0 so was I left once the parameters.

  After that, nothing happened.

  I almost tried everything without success. Removed the power and battery power, put their back, but still no start. Just the light of the HARD drive lights up for a few seconds and the cd turns a bit, but after that nothing happens at all and completely the screen is black.

  I don't know anything else to try.

  Please let me know what that can do to restore its functionality without taking it to the service, I can't do it.
  I think that may not be cause of failure of the BIOS update I have seen it is the version and was right.
  Is it possible to reset the BIOS? I need to disassemble the laptop to do this?
  Let me know what to do, I have good experience in such things, but I can't understand this.

  Thanks in advance for any response.

  Kind regards
  Stefan

  Hello

  I agree with Akuma. It really isn't that you can do about it. BIOS problems are complex and cannot be set by the owner of the laptop. Believe me you need professional help with this.
  Contact the closest Toshiba ASP and explain the situation.

• Satellite L750-A218 - fan run faster after 3.30 BIOS update

  Hello

  Here's a new show, I have am experiencing after the BIOS update.

  In my view, that the internal fans turn all the time by placing my hands near the keyboard. According to Toshiba software fan speed is 50% + while I do nothing. On the other hand, it is 25% before the update.

  They are updating the BIOS to give the laptop more ventilation or something.
  It's weird. CPU temperature is 45%. I upgraded from 3,00 to 3.30, for your information. Thank you.

  P.S. The speed of the fan is stuck at 50% + and wont go lower than that.

  What bothers me the most is that when I put my hands on the part at rest I feel the vibrations of the fans. I use the keyboard a lot and it is a huge nuisance. Is it possible to get the old BIOS, the BIOS updated not did me not a backup option. Also, I don't have a problem with the voice of fan (s). Its low.

  Edit: Just downgraded to 3.10. Its the same thing. Couldn't find the 3.00 version, I've had anywhere. It's frustrating.

• No DVD-ROM after recovery - Satellite A100-289

  I recently had my A100-289 expedition in for repair. A few days later the unit returned to me with a new motherboard.
  Unfortunately my OS has not started, so I got it from the DVD.

  Once you have completed the recovery process, Windows MCE prompted with the "new hardware found" - Assistant, who wanted to install a driver for the DVD drive. Usually you don't need drivers for these, do you think?

  After searching in vain the net for several hours, I tried to recover once more, then maybe the problem would disappear by itself, but unfortunately this was not the case, not even after the third recovery.

  I tried to install on a clean install disc that I used on my desktop before, just to see if it works and then uninstall it. What can I say? It didn't work anyway :(
  I am writing from said computer laptop on which I have installed as secondary to Mandriva Linux 2008 operating system. The DVD player works perfectly here.

  I concluded it must be a software problem, which has to do with Windows maybe, there is a way to solve it, but I don't have a working solution yet, although I tried to uninstall and reinstall both driver and drive several times without success.

  Any ideas?

  Hello

  First of all if you are able to install one operating system and then the CD/DVD drive works and surely it s not a hardware issue.
  Then you should check the Device Manager after installing the recovery CD if there is no yellow exclamation point.
  Then you must remove the drive from Device Manager and should access the registry.

  It to completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and then restart the laptop.

  Good luck

• Satellite A100 PSAA8K stuck in the BIOS after that the BIOS is flashed

  Hi all

  I used the utility to update the BIOS of Toshiba on this machine. It was working fine before, now it is blocked with the Toshiba Startup logo. Pressing F2 or F12 don't work. Pressing ESC. Gives the following error. No TPM or TPM has problem. Everything else seems as usual. It shows the BIOS 6.00, which is what I had in theory flashed to.

  I guess the flash gone bad. Is there a disaster for this recovery procedure?

  Hi guys

  It seems really turned something went wrong during the BIOS update process.
  Perhaps a new module ROM BIOS flashing could solve this problem.

  The point is that you need a BIOS version of special rescue and the drive to reflash the module ROM.
  But only the authorized service provider has such special rescue tool and only the ASP technician can reflash the BIOS.

  So maybe it's not a real solution but a tip how to get a solution
  I would recommend so contact the ASP in your country for the control of the laptop and a reflash BIOS.

  Best regards & good luck

• Satellite L40 PSL48L: No noise and Bios Update after installing XP

  Hai guys

  I have a toshiba laptop psl48l-0200u and lowered the score on XP Professional, but realtek audio does not work.
  At the launch of the facility, there is an error message "realtek audio installation failed.

  I think that this may have to do something with bios - then I downloaded Bios for XP and extracted into a folder - but the update of the bios.

  Help, please
  Thank you

  What to first say if you installed XP on your laptop, then you should also update the BIOS to the version of Win XP.
  The BIOS update must be performed on Windows XP!
  Simply run the exe file and follow the instructions on the screen.

  Regarding the sound issue.
  Well this problem is not related to the BIOS, but you have not installed the XP patches!

  Have you checked this forum for a similar question? I don t think so.
  I found this example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=59&ThreadId=25916

  or this

  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  As you can see, you need fixes KB888111 and KB835221

  Good bye

• Satellite A100-289 - does not accept the second module RAM

  Hello
  Sorry for my bad English

  I have a problem with my RAM secend slot. At the first bank i installt 1 GB 533 MHz DDR2 RAM in the second Bank too. The laptop starts but when I installed the second RAM after the BIOS Windows screen accepts 2 GB of RAM.

  [PC-information]
  Modellname Satellite A100
  TEILENUMMER PSAA9E-11H047GR
  Serial number 96304832Q
  BS-Version Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  BIOS 6.00 version
  Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz

  Hello

  > but when I installed the second RAM after the BIOS Windows screen accept 2 GB of RAM.
  This means that you install RAM modules while the laptop is running?
  I m wondering your laptop still works. Normally, you could destroy the whole motherboard and the module.

  Anyway, to me it sounds like that your laptop isn't compatible with the memory modules vive. What modules do you have exactly?
  I have good experiences with the Kingston modules.