satellite 1110 - right hinge broken

Similar Questions

• HP envy 6 right hinge broken

  Hello!

  If the tale:

  I bought my computer hp laptop envy in January 2013. I had no problem with him until the end of 2013, when the right hinge began to get stiff. He finally cracked the monitor in February 2014. I have be it because I had left no guarantee.

  Another thing I also noticed was that the laptop couldn't use the GPU radeon 7670 m more after the incident. I ran several programs with high performance and dxdiag shows setting the intel processor is used. This can also be considered bad performance.

  Now, I have discovered that the hinge seems to be a problem of structural with computers laptops hp and people received free repairs from the company. I live in Finland and would like to know if it would be possible for me also. It would certainly be better my image of HP, if the laptop has been fixed.

  I asked what your issue escalated.  Someone will contact you soon.

  This does not mean instantly.

  Please be patient.

• Widescreen - torn R61i cable under the broken right hinge

  Hey everybody,

  I recently bought a used R61i which has been described as having only a right hinge broken. - However, the EC, I noticed a black ripped/broken cable protruding under/the broken right hinge all about.

  I searched through many many sons of "broken hinge" on various forums, but no one ever mentions this black cable near the right hinge as far as I can tell. He is always on the left hinge antenna cables. I have also looked at the manual but cannot know what is function of this cable (a). I think it has something to do with the screen, but:

  The laptop seems to work very well; I installed Windows XP and there is no problem with the screen (outside of not being able to set a higher resolution, but I think this comes from a graphic/Monitor driver problem).

  Can someone tell me what is this black cable and what problems it might cause (in the future)? Should I replace it - is replaceable? I'll be replacing the hinge and clean fan anyway, so have to disassemble the laptop anyway.

  Here are some photos to show you the black cable and its location:

  https://www.dropbox.com/s/i12myqu7v188dd4/20131111_215130.jpg

  https://www.dropbox.com/s/dmak1mxz2uqpsxc/20131111_215107.jpg

  Thanks in advance!

  The black wire is the wire aerial (secondary) to the wireless LAN. The gray wire on the left side is the main. You can get a poorer Black wireless reception. To replace it, you must remove and disassemble the lid/LCD

• HP ENVY Sleekbook 6 t-1100: hinge broken without repair option

  I had my sleekbook for over a year now and yesterday when I went to open up the laptop the right hinge broken the screen and the bezel popped. I've always been very careful with this laptop and never fell. I looked online for a solution that I could buy, and everything I see is drill holes in the back and put on nuts. I don't want to do that. Help, please!

  Thanks in advance for any help!

  Daniel

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information). If you are unfamiliar with the operation of the function of the Forum, private messages you can learn about it here.
  Thank you for visiting the Forum from HP Support.

• Satellite 1110-Z14: Broken cases-parts

  I have already for a long time a Satellite 1110, some time ago came tears of the screen cover, now am completely down felt the corners until the hinges - too finally the right hinge is completely broken.

  The laptop does not fall down!

  Spare parts costs more expensive than 300EUR (by Toshiba Servicepartner), he would give the possibility of a "practical" completion

  [Edited by: admin October 30 05 08:13]

  Hello Tobias

  I think that the parts are expensive because manufacturers have a lot of expenses (ie. warehouse).
  In my view, you can see in the cheapest parts website or a second hand.
  In addition, the alternative is Ebay.
  I m you will find a good part of your device.

  Best regards

• Satellite Pro A60: hinges are broken - need new parts

  I have a satellite Pro A60, unfortunately no longer under warranty. One of the screws which fix the hinges to the frame has sheared which means the hinge must be replaced.

  When I removed the top cover (it covers a bunch of inches at the back of the laptop, I noticed the two hinges were cracked.) This allows the hinge of the left hand to oscillate (as the only thing now that the screen of the laptop is the only one to live.

  Basically the two hinges need to be replaced because the only thing now the screen of the laptop (on the right side) is the clip on the cover! It works pretty well, but of course it will put additional pressure on the left side then, probably won't be too long prior to the screw on the left side shears off.

  any kind soul here would know the numbers for the left and right hinges?

  The model name is the model Satellite Pro A60EN PSA65E 00N00WEN number.

  Hello

  All parts can be ordered from the Toshiba service partner in your country.

  I studied a little bit in the net, but don t found part numbers.
  However, to ask guys ASP. They should know what part is compatible

• Satellite A100-233: How can I display right hinge?

  Hello

  My right hinge of the screen is broken just yesterday, how I can get it has code / number to buy a new one?

  My laptop is A100-233

  Thank you very much!

  Contact the ASP in your country to order the right part.
  Guys can be sold or if the part is not available at this time then the service partner should be able to order it from the head stock Toshiba.

  Greetings

• Satellite L50-B-1LN - broken screen hinge

  Hi all

  November last year they gave me a L50 B 1LN Satellite to the DSO at my University to help dyslexia as I had never really owned a decent laptop.

  Since then, I have the Treaty with great care, so you can imagine that I was not too happy when the right hinge connecting the screen and the body became stiff a few weeks ago.

  At the point where I do not think that anything of it think it is would have something taken there will be evicted over time.
  This was not the case, however, I discovered a few days back, part of the inner metal structure of the screen had been bending broke now and is now coming out behind the screen, as the force to break has removed some of the envelope made of plastic.

  The laptop is less than a year so I'm disappointed that equipment broke in a way, it is designed to be opened and closed! The wire on the screen is now exposed, so I want this to be resolved sooner rather than later.
  Apart from this, the laptop is fully functional and in good condition.

  Since then, I tried to find an appropriate on the Toshiba site number but had no success, I can't turn in circles, and I'm not really sure of what to do next.

  My provider is not any string like world of Curry or PC, so I can't exactly take it there.

  Any advice on how to go on this matter would be appreciated.

  I have attached some pictures of the damage.

  Thank you

  Cameron

  Since then, I tried to find an appropriate on the Toshiba site number but had no success, I can't turn in circles, and I'm not really sure of what to do next.

  In the event of hardware problems, the authorized Toshiba maintainer in your country would be the next point of contact.
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  .. .and I agree with you: the lid of the laptop is designed to be opened and closed and it should work properly...

  So I hope that the ASP would be able to solve this problem

• HP ENVY Sleekbook 6 pc: HP ENVY Sleekbook 6-115er left and right then broken hinge

  Good evening!

  My name is Ann, I'm originally from Kiev. Finally, I bought a HP laptop I wanted to take and after a year had problems with hinges.
  Sorry for my English, I'll do my best.

  I did a search and now know problems with these models hinge, but how could I know before. HP is a good portable all the I don't know, they are really, but the hinges!

  My left hinge has decided to go wrong and it is by the edge at the bottom left of my screen to spit, as I have the opening screen / closing. I used to work with this condition laptop but now after a month of my careful use also broken right hinge. Now, I put something behind the laptop to keep it straight. But really now it looks like a PC, because I can't move it anywhere.

  What can I do? Now, I have no guarantee and no service local hp here, or is it somewhere in Kiev? I can spend a lot of money for repairnig closed privat, but I think that this problem will occure again.

  Can anyone, HP please tell me how to solve this problem, what to do?

  Here is an image how it looks like.

  

  Best regards

  I brought your question to the attention of a team within HP.

  They are likely to ask for information from you to get your information or product serial number.

  Please search for a private message from a contact HP identified.

  Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with works as a private of the Forum messages, this post has instructions.

  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to-post-and-more/how-to-check-your-messages/TD-p/3547355

• Satellite 1110-Z20 - Power button broken

  Hello

  the power button on my Satellite 1110-Z20 is lost. It seems that the button must only be fixed with spring and will work again.

  However, I don't know how to open the case without making any damage.

  Does anyone know how to open the laptop to fix accessnd one the power button?

  Thank you very much

  Hello Kevin

  The small top panel in proximity to know that you can carefully remove the lid of the unit.
  But if your warranty is still valid, I suggest you contact the ASP for the repair.

  Good bye

• Satellite 1110: USB2.0 PCMCIA install freeze

  Hello

  I have a Satellite 1110 (at the level of the Bios 1.2) and wanted to install a Trust 3 Port USB 2.0 Cardbus adapter http://www.trust.com/products/product.aspx?artnr=12918.

  The problem is that the system completely freezes and nothing happens when the card is inserted.

  I'm always looking for how to change the IRQ setting, but impossible to find a solution.

  A problem is that I can't pass the Bios to 1.5 because my floppy drive is broken does not work. -> Y at - it a possiblity to bring in the Bios 1.5 without floppy?

  Thanks in advance.

  Hello

  Gibson is absolutely right. Sometimes it's dangerous update BIOS and you can ruin the entire system. To use this device exists in the traditional version just and do it with a floppy disk.

  I hope that the installation is done as described in the manuals of the card.

• Remove cover from closing/screen on my Satellite 1110-Z14

  My Toshiba Satellite 1110 - portable Z14 has developed a fault which means he keeps
  cut to leave a blank screen. If I open and close quickly, he returns to everything and then goes again. It is not cost-effective to repair it and I connected another monitor and now I'm fine. I would remove the lid/screen and found it difficult.

  I have removed the two screws but still could not remove it, the 2 hinges do not seem to move - someone ' can someone help?

  Hello

  To remove all of the screen, follow the steps

  1. remove the two screws on the back panel of the cover of the band
  2. open the display Panel completely so that it is lying flat
  3. remove the cover of the band by lifting the left edge
  4. remove the screws fixing the whole of the display:
  -Two screws that attach the hinges
  -A support for right hinge mounting screw
  -A screw of the left hinge support
  -A screw of the display cable
  5. unplug the display cable by pulling on the attached cord.
  6. open the faceplate so that it is perpendicular to the computer and lift it.

  Good luck and be careful.

• HP ENVY 1090ee 6 - left hinge broken

  I bought HP, Acer, Lenovo and Asus because I thought that the only thing that HP offers each time, is of exquisite build quality. However, today, I was met with a surprise. The left hinge (one near the power button) has apparently unravel, as if on its own.

  Surprised as I was, I contacted the technical support. Surprise, Surprise, my warranty information is wrong. Ive lost out on half a year warranty services.

  FLASH BACK: DUBAI - laptop bought on 3 February, 13 - great expectations.

  SKIP TO PRESENT: INDIA - lost hinge broken and guaranteed.

  Then I took a deep breath and open the HPSA faithful once again, inform the specialist my "fake date of purchase" (note that I am in India at the time). I am informed by the technician that I have 'support of the HP tech to the Arab Emirates UNITED to rectify the problem. '

  A STRIKE.

  Thus, everyone knows how 'good' the guarantee are services in India. I remember having an old all-in-one HP printer. The printer does not work, so we took to the "authorized" HP nearest after-sales service. The first day we went, we were not given any "service". The next day we went, that they claimed THAT NOTHING under the guarantee it covers. They could be right, but oh well, we paid for rectification.

  So now I feel like its going to be a repeat of the last time. And it's funny, because I found a large NUMBER of people having the same problem. I don't want to support the customer, waste BECAUSE I SAW them HELP OTHERS. The sad part is that these people are mostly from the States.

  Maybe its not justified, but it always seems like the developing countries get the worst of both worlds. We are the highest consumer population, and yet we get the inflated prices (I know are due to many factors beyond the control of the company) and poor service.

  I can't believe that there is not a single HP to Mumbai service center is, well, purely HP, and not a 3rd party "authorized dealer". I suppose that can't do anything on this subject and maybe as I write this in vain, but if someone is listening (or reading), may I suggest at least to have a third party service center. This will help a LOT.

  I hope someone can help me.

  AK

  

  Hey anand602,

  I'm very sorry to hear that you are experiencing this issue. I forwarded your case to the appropriate Department. You should hear from someone via private message in the next 24 to 48 hours.

  To check your private message, connect on HP forum. There will be an envelope at the top right next to your username.

  

• Satellite 2410-SP203 hinges need

  Hello world

  I don't know if this is the right forum to post my question.

  The hinges of my Satellite 2410-SP203 failed, and as a result the lid is loose. The problem is that I can't find the right hinges for your laptop. My 2410 is an old machine, but it works very well for general surfing and reading emails and that's why I want to fix. I tried several sources and eBay without success.

  Does anyone know where to find the hinges so that the machine? I have also some pictures, if someone wants to take a look.

  Thank you very much

  > We know where can I find the hinges so that the machine? I have also some pictures, if someone wants to take a look.

  Well, I think that its more often impossible to get parts for this old notebook.
  Maybe you can order a right hinge for this laptop directly from Toshiba.

  You must contact the local partner of authorized Toshiba service to order the part you're looking for.

• Re: 1 GB of RAM / update BIOS for Satellite 1110

  Hello

  I ordered 2 x 512 MB of RAM at CompuRAM. According to their information 1 GB is possible for this model. According to the user manual only 512 MB is possible. As normally CompuRAM information is right (maybe necessary BIOS update), I tried.

  But it does not work. I can only use 1 x 512 MB.

  Does anyone have information on RAM update for Toshiba Satellite 1110 (model PS111E-003DN-GR/S1110-Z16)?
  Could help update the BIOS?
  How to find the update of the BIOS in the Toshiba homepage (model 1110 does not exist)?

  For any help thanks!

  Thomas

  Hello

  I found the info that this notebook can handle with 512 MB max.
  Sorry, but the BIOS update is unable to help.