USB printer problems

Similar Questions

• Dedicated assignment pool USB printer problem

  If it's in the wrong place, I apologize and place stated to happen.

  We have:

  View 4.6.2 build-916912

  vSphere/vCenter 4.1.0 - 799345

  A pool of dedicated server with a single machine (SP1 Win7), single-user assignment. We strive to get a local USB printer to receive the VDI machine printing jobs. The printer is an HP 2300 series. The printer is installed on the local computer. The first document prints well, the second document will be a blue screen the VDI (Capture.jpg) machine.

  Any thoughts?

  If additional information is necessary, I'll give you a pleasure them.

  I always think that driver first, but if you want more detailed information on this topic, you can search the stop on the Microsoft site code and see what it says.

• HP Envy 5532 - Win 7 64 - bit - USB printing problem

  Hi all

  I recently bought a HP Envy 5532 all-in-one, which is located to the sides of

  my HP Compaq 6000 running Windows 7 Pro 64 bit.

  I tried a few HP diagnostic programs, which recognize,

  but do not solve the problem and suggest uninstall and start again.

  I also installed the latest driver download, rather than the installation disc.

  I also tried the Fixit Windows for the USB, nothing helps.

  My problem is, no matter how to install software/drivers to support this

  device, I can't print via USB.

  Once installed, I print a test page for 'printer properties', I can see the coil of the page

  in the active jobs window, then disappear and... nothing.

  There seems to be a link broken between the printer and USB001 which is the virtual USB port

  Everyone knows and if so, please share how you solved.

  as it is driving me crazy.

  Thanks in advance

  After doing a bit more research, it is certainly a problem of Windows security permissions.

  I have a workaround by following this link and can now print. :-), but do not know the security implications.

  Not sure that the installer sets incorrect permissions during installation,

  Certainly, I ran the installer as an administrator and still had the problem.

  Maybe you could advise on the required parameters?

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/56f102d6-E53A-42a9-9855-1e01efeb4cd2/Printer-Spooler-access-denied-on-local-printers?Forum=winserveressentials

  Hope this helps to determine what the problem

  concerning

  Terry

• Satellite 1410-801: installation of a USB printer problem

  I am trying to install a new printer USB (dell 725) on my 1410-801. All the printer drivers are OK, but then, laptop and printer won't communicate with each other. Anyone know if the USB ports for this model to support this type of printer?

  Sorry I'm not a geek!

  Hi Buzz

  On this path, it is really not easy to give a precise answer. In my opinion you should try with the producer of the printer supports. They have more experience with the installation of own products.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  I am not familiar with these communities - not provide Adobe and LR all direct support?

  You bet it's your page layout. As I said, the Epson driver has many offers for the same size paper. In addition, do NOT use Auto expand in this selection.

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• C6180A: Network printing problem series C6100

  Hello

  I pray that someone here can help with my network C6180A impression of questions, as I am at a loss to know what to do. I'm technical enough for a layman (not irritable) so able to fix my printer problems, I had to do several times in recent months. However, I am now in a complete deadlock as to what to do next.

  Implemented - laptop HP Pavilion (less than 1 year running Windows 8.1 64bits) connected by wired home network using Netgear HomePlugs, on which my C6180A All in One Photosmart printer is also connected by a Homeplug Netgear network around my house for others to use. The network software Netgear genius picks up the printer and it shows on the fine network. I can also access the IP address of the printer through my thin Firefox browser.

  Printer C6180A is (I think) about 8 years ago and has been well used with over 44 K printed pages! It worked well overall until recently. Minor problems have been solved in the past, which I was able to do very well.

  Until recently, the printer worked very well, so a few weeks ago (nothing has changed on it, or my laptop), it just started to stop printing and also started to enter spurious characters (always number 7) on the LED panel without doing me anything, as if someone was going to put in a fax number. It would show a string of 7 like this: '7777777777777777777' as a fax number alone.  Yet I did not or use the fax on it more. It's where I wondered about capacitors, as I mention below...

  However...

  It will not print many pages at once of all today - even if I get it print OK. It does not go offline (it used to do this), just print job gets stuck in the queue and must be deleted using HP Print & Scan doctor. Nothing else removes the queue now. And no other problems are reported with this utility. If they are, then I have Setup or the utility corrects.

  I did the following to get it fixed so far (with little success ongong):

  -updated and install printer via the HP website drivers (most recent is dated December 6, 2015)

  -uninstalled and reinstalled the driver software several times = sometimes a test page impressions, not always

  -restart the laptop and printer each time I do this to clear no matter what cache

  -Remove and add the device in Control Panel = got a few pages printed today this and nothing else then prints

  -check the IP address of the printer to make sure that his recognized on the network = all fine here (IP address added manually in the settings of the network on the printer a few months ago), although I can't make it here anymore as the "ok button" on the printer does not work now (minor in question not related to this in my opinion)

  -did a hard reset of the printer using the # and 6 to do this = it worked for a few pages then orders

  -printer is always / recognized by any software, driver or utility HP PSD when turned on to be detected to install

  -printer works fine when connected directly via a USB cable, but which is not what I want to do on a daily basis

  -have contacted Netgear in the recent past to make sure that my HomePlugs on my network worked very well, they were. If not, then the printer would not be detected by any software installation or fixing with HP PSD

  My last resort will be to check if the capacitors are down, I saw in other forums that this is a common problem after a while on these printers. Before making this "repair" I bought the capacitors, I wanted to check if there is anything else I missed that I can do to finally once and for all this problem of printing.

  Help on this would be so MUCH appreciated by any expert here, because I lost so much time, days in fact, try to resolve this issue as you can only imagine. I have to be able to print for my business. It is not an option to replace the printer currently.

  It worked fine until the last 3-4 weeks or more... Where my question detailed with what I did to fix it until now.

  Thanks in advance. ANIA

  Hello @AZS1,

  Welcome to the Forums of HP's Support. I understand that you have a problem with your C6180A. I would like to help.

  To be honest, you did some troubleshooting. To say that you are quite technical for a layman seems to be an understatement.

  I provided you with a link to solve network problems. If the problem persists then you might as well go ahead with the repair. The only other option would be to have fix the printer.

  "Printer not found" error message for printers all-in-one HP Photosmart C6100 C7100 and Officejet Pro L7700

  Please let me know how it works. I'm pulling for you.

• USB printer not detected on satellite series?

  Hello

  Have a laptop Toshiba Equium and today I bought a printer from a different manufacture.
  USB cable is not supplied with the printer (not good things) and so had to buy a.

  Laptop does not accept the USB cable saying something like USB isn't signwritten with the laptop?
  I have no idea what has happened?

  I'm sure that the printer is 100% and the USB's all nine... the majority of the facility took place until this problem is with the USB
  The laptop never had a printer connected before in 18 months of ownership.

  Any help!

  Thank you

  Hello

  First of all, you must make sure that you bought a straight cable and which is compatible with the laptop.
  My sister uses a USB printer and the cable that she bought looks like this;

  [USB 2.0 printer cable | http://images.tigerdirect.com/skuimages/large/C184-4000_U_6-main.jpg]

  But the note man; You should check this printer installation instructions.
  Sometimes the driver (shipped with the printer) must be installed before you connect the printer to the computer!

  What you could do to first remove the USB ports, controllers from Device Manager and reboot the laptop.
  After restarting again the USB ports must be installed again.

  After this short stage, you continue with the installation of the printer described in the manual!

  Good bye

• DeskJet 2540: cannot convert mac wireless usb printer

  Hello

  I'm having a problem setting my printer all-in-one Deskjet 2540 on my macbook (osx El Capitan). After basic implementation through usb connection, I was able to connect my printer to my router, which makes possible wireless printing. I was then able to print wireless from my phone using remote control all-in-one app.

  However, I now want my macbook to establish a wireless connection to the printer instead of the usb connection that is used for configuration. I can't find the option to convert a usb printer to a printer that is connected to the wifi. When disconnecting from usb, laptop computer notes the connection with the printer is lost. To install my printer, I use the HP Utility software, in which I can't find such an option. Also, when passing through Apple-> system-> printers and scanners preferences I can't find an option "convert to wireless. I also read a method via Finder-> applications-> HP and then an icon for installing the software & should be there? In my case, there is only the HP Utility icon which directs me to the same program in which I could not find the option.

  What I was looking for, and where can I find it?

  Might be a little exaggerated description, but I hope that this makes it extremely clear...

  Hi @Jeppie,

  Thank you for joining the HP Forums!

  I read your post about how you try to connect your HP Deskjet 2540 to your Mac using a Wi - Fi. I'm happy to help you!

  Please take a look at this video, install a printer in Mac OS X v10.11 El Capitan HP by using a network connectionand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that solves your problem!

• 10 Windows compatible printers: printer problems after the upgrade to Windows 10

  If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

  If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

  • Cannot print after upgrading
  • Cannot parse after upgrade
  • Printer software installation & screen opens instead of HP printer Assistant
  • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
  • Multiple display of printer in the HP printer Assistant names
  • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
  • "Access denied" error change HP Solution Center print settings
  • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
  • Fax device are not not in the devices and printers connected to a USB printer
  • HP Printer Wizard does not open with a USB connected printer
  • HP Smart printing does not open in Internet Explorer
  • "Error-2081883401' poster during the uninstall of the printer driver.

  In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

  Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.

• Two Roaming PC (domain) must share a USB printer.

  Hallo all

  I have two PCs that need to share a USB printer.

  PC 1: Win 7 Pro, roaming profiles user (domain)
  PC2: Win XP Pro, roaming profiles user (domain)

  These two PC will be used out of the site and will not be connected to the domain. Users must use their domain user name and password.

  What group policies must be configured to allow the sharing of files and a printer USB between two PCs, when off site?

  With workgourps, it is simpler, but because I'm not the domain administrator I don't know if there could be actions prevention policies...

  Thank you in advance,

  Chris

  Hi Chris,

  Since you are facing problems with the systems in domain, it would be better suited in the Windows Technet Forum. Please post your question in the following TechNet forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-CA/w7itpronetworking/

• LaserJet Pro 100 color MFP M175nw printing problem with Erorr with "Print queue was not accepted.

  MFP M175nw would not print no matter what MAC or HP labtop... it will show the test without problem page.

  Erorr log shows this:

  W [27/Mar / 2013:19:26:41-0400] HP_LaserJet_100_colorMFP_M175nw__0621F0_: printer takes in charge Create Job but not use of Send-Document.
  E [08/Apr / 2013:21:10:25-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:10:48-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:11:11-0400] [post 112] Print queue has not been accepted.
  E [08/Apr / 2013:21:11:34-0400] [post 112] Print queue has not been accepted.

  Any expert know about this?

  I need to know more information about what is happening here to start. It seems that you are experiencing printing problems, but I can't get a lot of information that you presented. All the information show me is that the file could not be accepted by the print job. I'm going to need to know what it is that you print file type and size, the program you are printing the form, if you are still able to print other documents from other programs, how long it lasts and any other relevant information.

  Departure, we will perform the two resets in this video:

  http://www.YouTube.com/watch?v=31TbWMrTaFk

  Then, if you use a USB cable, make sure to remove (this is important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

• HP 6830: HP 6830 printing problems

  Initially, this printer has been used on a system with Windows 8.1 (64-bit) and it worked flawlessy. After the upgrade to Windows 10 However, he had a few intermittent printing problems. Known upgrades can cause problems I uninstalled/reinstalled and everything seemed ok. However, the same problem reappeared immediately.

  Everything works ok for a bit then the printer stops working. Can not scan or print (from Panel of control printer itself or control office). The printer must be powered off/on power so that it can start working again.

  Ran the program Scan HP that came with it and made sure to drivers are updated. The problem persists however. What can be done short of buying a new printer? Help, please.

  EDIT - I forgot to mention it is configured to operate wireless and not via the USB port if it matters.

  I wanted to give you an update...

  I "think" the printer now works correctly? It has been a few days without question since I worked on it back which is longer it's gone in the past. I do not accept the solution again, however I want to give him a few more days to be sure. I thought it was fixed before and printing problems are back.

  Notes:

  1. I do not have the procedure described above SMTP uncheck ^ ^ ^ I didn't quite read the right steps when you work on it (it's actually the printer of a family member and not mine). I spaced on where he is told to do a right click on the printer icon and then click printer properties. I guess my mind went to some properties. I didn't know there was a printer properties to select. Printer properties is higher in the list of menu along that opens the right click (I have a HP printer too and he tried once I realized my mistake). I guess I'm so used to click the General properties, I just cleared the research of properties of the printer and thought that it meant click regular properties.

  Because I clicked on the wrong properties option I could not find the ports tab (but I was able to find the IP address - it was OK) so I thought maybe gave me by mistake as follows to another printer or the version of windows. So I just moved to other options. If someone reads this thread to try to resolve the issues I've had to make sure and look up in the list for the printer properties and select is NOT as the ordinary properties which is at the bottom.

  2 - the update suggested KB was already there and installed. However, it had been installed shortly after the 10 Windows upgrade which is when issues with printing suddenly appeared. So I uninstalled manually downloaded the update and reinstalled just in case it had been corrupted during the original automatic installation. This is a HUGE update and I have seen that people have screwed up in automatic updates in the past.

  3 - I decided to uninstall all of the software and the printer and start over again once more. In doing so, I found a few HP entries that were dated before the previous uninstall/reinstall tent while they were not uninstall as they should have and I thought they had. This means that they have not been updated during reinstallation or the other. Made me think maybe one of them was somehow behind the questions?

  I had to use 3rd party uninstalling and registry/hard drive cleaning to remove all traces of these couple like Windows Add/Remove Programs software wouldn't uninstall them at all, or if she did he left pieces everywhere.  One in particular (HP Solutions Framework Support) wouldn't uninstall period until what I downloaded from specific software allowing a forced uninstall. Took long to get everthing HP about the machine off.

  Once I have finally managed to remove all traces of the old installation of HP and went forward with the reinstall using latest software/drivers on HP.com, I noticed the relocation took a little longer and I was asked to do more to lift the printer up and running. I think that some of these programs/registry entires which gave me such a hard to remove time were corrupt reinstalls previous that I tried when popped up printing problems after upgrading from Windows 10. Once they were gone went to reinstall it correctly. Or so it seems, it's just a guess.

  Anyway, as said above ^ ^ ^ "seems" to have corrected the problems. I do not know about you until the printer is used for a few days. It is used a lot if it's not resolved, I'm sure I'll hear about it soon. After that earleir tries to fix the issues would already have surfaced long before now so I'm hopeful we finally have it.  I'll be back if everything goes well and will accept the solution OR post that it did not really work. Don't want to prematurely.