Satellite 1700 - screen TFT/DSTN

Similar Questions

• Question about M40 with replacement screen TFT M40X

  Hello!
  I have a Toshiba Satellite M40 it the TFT screen is broken. I also have a screen TFT of M40X. Can I change the two screens? And I have to change the cable from the two screens or not?

  Thank you

  You can check if the two have the same monitors cable connections, which I am sure they do. Thing to do is to spend autour and know if it will work. But the differences between the m40 and m40x are not many, and the screens should work even switched around.

• Satellite 1700-300: Win ME - invalid system disk - ERROR F3D failed

  Hello

  I have a Toshiba Satellite 1700-300 on windows Millennium Edition. Haven't used for a few years, but when I'm past it the other day the screen says: invalid system disk. I put in my laptop recovery disk, but he cut in halfway through with the message: ERROR F3D failed.

  Not really sure what I'm doing and really can't afford a new!

  Help would be thank you very much!

  Nice discussion on this error, you can find on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1255

  To be honest, I also think that there is a problem with the HARD drive.

• Satellite 1700-200 does not start

  HELLO, I RECENTLY GOT AN ERROR ON MY LAPTOP SATELLITE 1700-200. THE ERROR IS THAT THE MACHINE DOES NOT START IN WINDOWS MILLENNIUM EDITION. IT STOPS RIGHT ON THE SCREEN START AND STAY THERE. I HAVE LEFT IT ALL NIGHT AND CAME BACK TO HIM ON THE SAME SCREEN. NOW WHEN I PRESS CTRL ALT DEL TO RESTART, I GET A BLUE SCREEN AND ERROR "WHEN INITIALIZING DEVICE CONFIGMG
  WINDOWS PROTECTION ERROR. YOU MUST RESTART YOUR COMPUTER.
  SYSTEM ORDER. »

  I SEARCHED ON THE WEB AND SOME ANSWERS SAID TO TRY A BIOS UPDATE.

  I WENT TO THE SUPPORT SECTION AND DOWNLOADED THE UPDATE. THEN I FOLLOWED THE INSTRUCTIONS TO GUIDE ME IN THE UPDATE, BUT THEN GOT THE ERROR THAT THE UPDATE DOES NOT MATCH THE PRODUCT ID. DOES ANYONE KNOW OF THIS PROBLEM AND A RESOLUTION. I SAW THE MICROSOFT VERSION AND CANNOT FIND ANY WAY TO FLUSH THE CACHE L2. ANYONE KNOW?

  Hello

  The BIOS updates are available at https://eu.computers.toshiba-europe.com

  Support & download you can choose your machine (important!) and download the BIOS files!

  When it does not also find another way!

  On the blue screen: you tried to start safely modeor last known good configuration?

  Campino

• Satellite 1700-400 series

  I have a laptop model Satellite 1700-400 series. I recently upgraded from windows 2000 to windows XP. My problem is that the modem does not work, Lucent win modem. I check with Toshiba and my model is compatible for the upgrade. Also I have updated the bios and drivers for the modem, the modem but still does not work.
  Does anyone know how to fix this?

  Michalis salvation,

  where did you get the xp-modemdriver, which is currently installed on the hp toshiba I found no driver for XP.

  You can search in the internet one xp-driver an "AT & T MicroElectronics (Lucent) Mini PCI Modem" that is built into your sat 1700-400.

  Bob77 Bye

  PS: Don't forget the reward point! I want to be a topuser!

• Satellite 1700-200: how to upgrade the RAM

  I have an old laptop that Toshiba Satellite 1700-200, with the warranty has expired. Now, I need increase ram (only the wealthy 64 MB, not enough to properly run an installation of Windows XP or a Linux distribution real), and I don't know how to do this. I searched in google several times but I can't find a tutorial for this version. Anyone know how I can do?

  Thanks much ;)

  Hello

  I m not 100% sure, but I think the locations of memory could be placed either at the bottom of the device or hidden under the keyboard!

• Satellite L20 screen empty to a grey or orange color

  Satellite L20 screen empty to a color gray or orange, sometimes this problem occurs mainly when I'm on the internet and I use firefox.
  It can happen two times per day or 1 every week, it seems to be no cause for this, happens on various web sites, are up to date anti virus and spyware installed and run on a regular basis.

  Someone has a similar problem, out the problem I need to stop the laptop with a short press of the power button / stop, this triggers the shutdown procedure, on reboot, everything is ok

  THX

  Dave

  Hello

  Strange! This problem only occurs when you're on the internet and use the firefox application? What s on IE? Occur also with other programs?

  These strange sounds of relay, and if it appears only with a specific application, so I guess it's a software problem.
  Sorry, but all I can suggest is to remove the firefox and install again or / and recover the device with the Toshiba Recovery CD supplied.

• Satellite 1700-400: maximum hard drive size!

  Hello

  A late response.
  A half year ago, I asked about the maximum size hard drive for the Satellite 1700-400
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17328

  Originally it is a 10 GB HARD drive, but now there are no more small hard drive available, so I bought a 80 GB
  and it works perfectly. :)

  grobi Oxford

  Hi grobi

  Thanks for sharing this info with us. It of always good to know what's possible and what's not. Thank you once again ;)

• Satellite 1700 - upgrade memory

  Hello

  anyone knows if it would be possible to use the dimm 256 MB so - 1700 Satellite or is it completely impossible because of the restriction on the motherboard?

  Intel chipset allows total 512 MB but manual says that 192Mo is maximum. I wonder if there is a way to overcome this problem by changing the motherboard.

  Hello

  I found information on Satellite 1700-300dvd and this unit compatible max 196 MB RAM
  This unit has a 64 MB of internal Ram and you can put a 128 MB module to upgrade the memory.
  In addition, you can use the modules:
  32 MB PA3003U memory
  PA3004U 64 MB of memory
  PA3005U 128 MB of memory

• Satellite 1700: Windows cannot detect the CD Rom drive

  CD drive on my laptop Satellite 1700 working under Windows. Windows cannot detect, but it works very well in mode cd player.

  Hello

  I have a question.
  Your drive is missing from the 'My computer' zone or the Device Manager displays a disk error?

  If the drive can be recognized in the BIOS, so I guess that the entries in the Windows registry are damaged or not right.
  I found this Microsoft Knowledge base and I think he should solve your problem.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  Please check and after if it succeeded.

• Satellite L300 - screen is very dark

  My Satellite L300 screen is so dark, that I can barely see the desktop. So far I have fitted a new screen, a new inverter, you press the power button for ten seconds without the battery and finally re-installed Windows Vista from the toshiba disk without success.

  Can someone tell me where I go from here?

  Hey,.

  > Finally re-installed Windows Vista from the toshiba disk without success.
  I was a little confused m
  Have you had this problem too when installing recovery or just after the installation of recovery?

  If you already have Exchange display and the inverter FL, it would be interesting to know if you have the same problem on an external display.
  You can test this?

  In General, you can change the brightness of the screen by pressing the FN + F6/F7 key combination.
  ?

• Satellite A87 screen continues to fall down

  Hi all

  I had a really serious problem: my screen continues to fall down, he does not stand in the position that I put it in.

  Is there something I can do? I had a 87-A satellite.

  Thanks guys, Thomas

  Hello

  You really have a Satellite A87? Sorry, but this series of laptops is unclear to me.
  Please check back this series!

  Back to your question based on your description the display hinges don't work properly and can not hold the TFT screen in the right position.
  To be honest, there's not much to do. The defective hinges need to be replaced.
  Therefore, you must contact the ASP in your country for help and ask for later handling.

  Best regards

• Satellite A200 screen backlight is disabled

  I'm having a problem with my Satellite A200.

  When the screen is opened, the backlight is disabled. You can vaguely see the screen keep it turned on, but it is too small to read.
  When you close it, you can see the screen backlight turns on, it stays on for just less than one second when you re - open the lid, and then turns off again.

  I guess that it has something to switch the lid being faulty.
  Can someone suggest solutions.

  Thank you very much
  Anthony

  This part of the message is very interesting:
  > You can vaguely see the screen keep it turned on, but it is too small to read.

  According to your description, you can see the screen and eventually the office too, but the entire screen is very low as behind a thick fog.
  Could this be just?

  Well, I think that this problem could be linked to the failure of inverter FL.
  The FL inverter is a tiny part hidden behind the frame of the screen and it controls the backlight of the screen s.

  In my opinion, this part should be checked by a technician for laptop.

• Satellite M200 screen turns off after that start & battery does not charge

  Hello, I am from Jakarta, Indonesia
  I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)

  After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
  but after that my monitor off all of a sudden when Windows is supposed to show the login screen.

  Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
  so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
  try to stop and then turn on again in a few hours later, problems still comes once.

  from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
  2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)

  my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...

  In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
  There are 15-20 minutes before my laptop turns off automatically

  Three months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
  Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
  are they somehow an incorrect wiring when replacing my motherboard?
  and am I need to replace my battery too?

  I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard

  any help would be appreciated :D

  Hello

  Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
  On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.

  Welcome them

• Satellite L750D - screen dark after the mode 'sleep'

  Hi, bought my Satellite L750D this morning and played around him.

  Have noticed when I put "sleep" and then wake it up in back, the screen remains dim, almost to the point where you can't see a thing. I end up having to restart, then its fine. Doesn't do it when I select hibernate, all standby mode.

  Any ideas?

  Just a question: when the laptop wake up sleeping mode positions can you use FN + F7 key combination to change the brightness of the top-level view?