Satellite 1900-803: how to install a USB 2.0 port?

How to install a USB Port of 2.00
Where can I get a?
Need for the new Ipod
Anyone out there it does or can help please?

Hello

As far as I know Satellite 1900-803 supports Cardbus 32-bit/PC-Card 16 - Bit interface and you can use cards PCMCIA Type II (x 2) or Type III (1 x)
Before you buy the PCMCIA card to USB you should check if it's compatible with your laptop.
But I agree with Quad. The PCMCIA card is a good solution to use USB 2.0

Tags: Toshiba

Similar Questions

  • Satellite 1900-803: Hi-Speed USB 2.0 card does not work

    I have a portable satellite 1900-803. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card, but it does not work. Manual of the card says that after the successful installation, I'd see a second 'USB bus controllers' heading which I did not. I even it was replaced by another one thinking that there could be some problems with the drivers, but it still does not work. whenever I plug in a device such as an mp3 player, a digital camera or a usb storage device, windows locks all of a sudden upward, won't move the cursor, the function ctrl-alt-del does not work and the worst of it, I can't turn off the machine!

    the map shows that it runs on any 32-bit location.

    I have the manual and the Device Manager to see if mine is a 32-bit, but I don't really know. This is probably the reason why it doesn't work? or is there another reason to make it work not? If this is the reason why, is there a way where I can upgrade my laptop's pc card slot to make it work?

    Help, please.

    I posted this question yesterday morning and did not get a single response. is it because it has to do with an older laptop? Please, someone, help...

    Post edited by: wes0702

    Hello

    Have you checked the Bios? I guess that the Bios Toshiba was preinstalled on your laptop. Am I wrong? There should be an option to change the PC Card controller mode.

    Here, you can change the mode of the automatic selection, CCIP compatible controller or card bus/16-bit.
    If the card supports 32-bit so you should use the 16-bit option.

    I think you should play a little with this option and possibly that the card will work.

  • Can external CD-ROM, I use it to restart my PC (Satellite 1900 803)

    I have a Satellite 1900 803, my CD internal Rom cannot read the recovery disk, I think I have an external CD-ROM to use it for my recovery disk. Has anyone tried this before and I have to install a driver. My laptop has a USB port. Appreciate the advice and comments. Thank you

    Hi André,.

    You will find that you will be unable to boot your laptop using a USB attached CD. I have yet to find a usb device which will start successfully.

    I suggest you to check the recovery disc in another computer first to check if the problem is with the CD itself or your existing internal CD.

    Good luck

  • Upgrade of RAM on my Satellite 1900-803

    My S1900-803 has 256 MB and 128 MB present. The manual says I can add 512 MB in the remaining slot. It specifies SODIMM 144 pin PC-133 3.3V, however I've analyzed the laptop using the CRUCIAL web site and this indicates that this memory is DDR and no SODIMM etc (results below): so who should I believe? and what type of memory should I buy

    Help
    Brian
    -------------------------CRUCIALS RESULTS----------------------------------------------------
    System manufacturer: TOSHIBA
    System model: S1900-803
    Motherboard manufacturer: Null
    Motherboard model: BTR20
    Features of your computer
    256 MB DDR 128 MB DDR PC2100 PC2300 EMPTY
    Maximum memory capacity: 512 MB
    Installed memory: 384 MB
    Available memory slots: 1
    Number of banks: 3
    Dual Channel support: N.A.
    Processor manufacturer: GenuineIntel
    Family of processor: Intel (r) Pentium (r) 4 CPU 1.70 GHz model 1 Stepping 2
    Processor speed: 1694 MHz

    I see that you are a bit confused ;)

    Satellite 1900-803 memory compatible modules are:
    * 200 pin PC2100 (266 MHz) DDR SODIMM *.

    See this page:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5494&ft=m&St=3

    Hope ;) clear now: it s

  • Cannot find the BIOS for Satellite 1900-803

    Hello

    I have a Toshiba satalite s1900-303 (model number-ps192e-00g1n-en) and I'm not.
    I have somehow locked myself out of the laptop. I used to haver a password to use the laptop. This password is not only for the bios, it is also necessary for the operation of the laptop.

    Somehow the password has changed and that's why I can't use the laptop at all. I contacted toshiba store and theyu said to use a loopback serial cable to fix it somehow and he also mentioned in an attempt to crush the bios with a new.

    I would like to try this, but I can't find the Bios or drivers. I was wondering if someone can help me solve this problem please.

    PS: When regestering on the toshiba site I had to enter the serial number for the laptop.
    The model under my name says 1900-803 when the sticker on the laptop clearly said 1900-803

    Hello

    > I have somehow locked myself on the laptop. I put a password for the laptop. This password is not only for the bios, it is also necessary for the operation of the laptop.

    I think that you have set the BIOS password.
    Unfortunately, the BIOS password can be removed from the laptop if you n t know the old password.
    You can not remove also the BOS password by updating the BIOS. If you would try to update the BIOS while the password is set then the ROM module flashes not properly and you laptop will not boot! It s dangerous!

    Only Toshiba authorised service provider can remove the BIOS password. Ask the technicians!

    PS: You book is a model of Satellite 1900-803 and BIOS, drivers, tools, etc. can be found on the European driver Toshiba page in * file Archive!

    Select * Archive Archive Satellite Satellite 19xx *.

    Good bye

  • Satellite A210-133: how to install Intel or via controller usb on windows 7

    Hello!

    I have a toshiba satellite a210-133 that I level to the 32-bit version of windows 7.
    All have been installed at the end, but I an intraoral machine that is connected by usb and it does not work properly.

    I questioned the manifacture of the machine and they said she wants an Intel controller or VIA USB to work properly.
    so I look at my computer\manage and I saw that
    I don't have this controller.

    Can you help me with this?

    Hi mate

    To be honest I m not very well what USB controller you mean exactly.
    The phone supports common USB 2.0 ports.
    Windows 7 provides own drivers USB of Microsoft, who controls this USB 2.0 ports.

    If the n t USB ports work correctly, then you should check if you need to install the chipset driver.
    Usually such driver chipset on the chipset manufacturer page.
    As far as I know the laptop uses the chipset AMD M690V (name of code RS690MC + SB600)
    So check that.

    In addition several devices needs a 3rd USB driver clean.
    I put t know if you intraoral machine needs these drivers, but I think that the manufacturer of this device must know this. So if you need this driver, please get in touch with the manufacturer of the intraoral machine to get this software.

  • How to install Windows USB on the Satellite L50D.-c 10.

    How to install windows 10 usb?, model L50D-C

    https://www.YouTube.com/watch?v=psPWQy3-5B0

    Might help u

  • Satellite M40-185 - how to boot from USB?

    I have a Toshiba Satellite M40-185

    I could not a off of usb because the two Mafany usb boot option

    Options for the device
    1. HARD DRIVE
    2 CD-DVD
    3 FDD
    4 LAN

    How to boot from usb?

    Hi esc.

    I think that you have answered the question yourself because you've posted all the startup options that are available and there is no option to boot USB on this laptop.

    All you can do is to install the latest BIOS, but as far as I know Satellite M40 can t boot from USB!

  • Clean install of windows 7 - How to install the USB drivers?

    I bought a Toshiba Satellite C50 loaded with windows 8, but want to go back to windows 7.

    I downloaded the drivers needed and have mounted the .exe files on a USB pen for installation.

    Before proceeding to clean windows 8, I would like to know - if I install 7 will be my trackpad stopped working?

    If so, how to install relevant drivers from the USB pen?

    Thank you, John

    > Before you proceed to clean windows 8, I would like to know - if I install 7 will be my trackpad stopped working?

    Of course, this might work.
    After Installing Win 7, you should be able to install the drivers for the USB flash memory key.

  • Satellite L300D-10B - how to install Ubuntu

    Hello. I recently bought a Satellite L300D-10B and I need to install Linux in dual boot in this laptop.

    Also, I don't want to lose utilities backup of the laptop has preinstalled, in case of emergency.
    Could someone be so kind and tell how to install Ubuntu 8.10 without having to lose the ability to restore the system (for MS vista) during an emergency?

    I also read on the internet of Wubi and you?

    Wubi is an officially Ubuntu install for Windows. Wubi allows you to only install Ubuntu as a Windows application, in a simple and safe way.
    Check it!
    http://wubi-Installer.org/

  • Satellite 5205-S505 - how to install the new OS after replacing HARD drive

    Hello.

    Installed a new hard drive. How to install an operating system?

    I thank.

    Hello

    You have a Toshiba Recovery disk?
    If so, then start on this disc.
    The installation process should start automatically and you must follow the instructions on the screen.

    If you n t have such recovery disc, then you will need to use a Microsoft Windows disk in order to install the operating system.

    Satellite 5205-S505 is a series of laptop Toshiba us and old drivers can be found on the Toshiba U.S. driver page:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  • Satellite 1900-803 runs on battery only

    My 1900-803 satellite only works on battery PWR. When AC pwr device connected, correct lights and AC power icon appears in the systray. But system turns off automatically when the battery goes down. Air conditioning unit seems to be ok and charge the battery as well as to show good indicators when connected to the led system.

    The good people of suggestions? :)

    see you soon
    Ally

    Hello Ally

    In my opinion there must be some problem with electronic power which controls the supply. The strange thing is that the battery can discharge while the unit is connected to the power running.

    In my opinion, you should also check power management settings. Is it possible that disable HDD is set to low balance time?

    Good bye

  • Satellite 1900-803: what are the specs of the PC card slot?

    I have a 1900-803 satellite. can someone tell me where to look whether its pc card slot is a 32-bit or otherwise?

    Hello

    I think that information that you might find in the manual of Toshiba which must be preinstalled on the laptop.
    On my laptop, I found manual and there is lots of useful information about my unit.
    But as far as I know this laptop supports 32-bit/PC-Card 16-Bit interface Cardbus and PCMCIA Type II (x 2) or Type III (1 x)

    Additional information:
    In the BIOS, it should be possible to change the settings of PC card.

  • Satellite L300-19F: how to install drivers?

    Hi, I would like to know, how to install drivers for Satellite L300-19F and what order to install drivers?

    Because I have somes drivers that I can't install it and I have a component without a driver.

    Thanks a lot for your help!

    Post edited by: XatOr

    Hello!

    Install the drivers, you can t and normally, you will find all the drivers on the Toshiba driver download page.
    Did you install Windows XP or Vista?

    I have a Satellite L300 too and install the as far as I know this is right:

    After installing WXP continue with
    Driver Chipset
    Display driver
    Audio driver
    Driver modem
    Common modules
    LAN driver
    WLAN driver
    And so on with drivers

    Continue with the tools
    Controls
    Utilities
    Hotkey utilities for display devices
    Press the start/stop utility
    Energy-saving

    Good bye

  • Advice on which new battery for Satellite 1900-803

    Hi all

    I am looking for a spare battery for my 1900-803 Satellite. The battery is PA3166U-1BRS, and when I get on a popular auction site I get a number of different opt, Li - ion:

    1:14, 8V
    Capacity: 6600mAh
    2: 14.80V
    Capacity: 6000mAh
    3: 14.80V
    Capacity: 5850mAh
    4:14, 8V
    Capacity: 4300mAh

    So who is the most appropriate? As I understand it, they are all compatible. I suppose that more 'mAh' best, is that correct? Price is not a problem, just performance!

    Thank you all very much!

    Pablo

    JohnnyS if you're out there you could make it three out of three for me!

    The battery that provides a higher mAh value is much better, because the performance is stronger and you can run much longer Notepad using these batteries.

    This is why I advise you to buy a battery that supports a capacity 6600mAh

Maybe you are looking for

  • P7-1534 PC: what is the P7-1534 office has Bluetooth?

    Spoiler (Highlight to read) Hello Can someone tell me if the Office P7 - 1534 PC has Bluetooth? I'm getting conflicting information on the web and in the HP help files. The help files are send me options that do not exist and the screenshots of the t

  • How to implement a function button to trigger several buttons

    Hi all, I have 6 buttons 'Read' in the front panel, each one works separately. In the block diagram, each button is inside an event. Now if I want to create a new button, that when clicked, all of these 6 buttons can be triggered, how can I do it? Th

  • rtfgvb45 keys do not work on my keyboard.

    rtfgvb45 keys do not work on my keyboard.  They just stopped working today and have not worked since.  How can I fix?

  • I have a hp7500 who uses paper 11 x 17,

    When I choose to print I do not get this option. I get B4, B5 A3 etc. Which one to choose. I tried B4, but it does not fill the entire page.

  • Foldable list help

    Hello Help QML and Javascript pro.  So far, things work fine, I can get the list to load and collapse but I can't edit the styles of the components.  When I debug it seems to ignore the component settings that I have.  I used the sample code from thi