Satellite 2405-201 will not start a windows

Similar Questions

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite C855-1GN does not start the Windows system

  My Satellite C855-1GN will not load Windows.

  After pressing start it say starting windows the four colors appear in the center of the screen and seem to vibrate slowly but will not following charge.

  I ve restarted and run the fix for the system, but it cannot solve the problem, run the system restore but luck is.

  Can anyone help?
  I put t really want to reload the discs so it s not necessary that the girl has loads of work United to this topic.

  She may lose.

  see you soon
  Phil

  Hello

  You are able to access the advanced boot menu by pressing F8 while turning on the unit?

  If you are able to do so, you should try to start the computer using one of the advanced options available in the start menu.

  You can try to start the laptop computer using the last known good configuration or you can try to repair the system by automatically selecting the repair my computer option, you can try to start the machine in safe mode to access important data on the HARD drive.

  Finally (after data backup) I would recommend to recover the laptop using the Toshiba recovery media

• Satellite A105-S4164 - will not start only white screen

  Hi all
  I have a laptop Toshiba Satellite A105-S4164 that will not start.

  I thought that maybe there is a problem with the battery. I took out the battery and then plugged the laptop to the power outlet, makes no difference. The blue lights in the front of the laptop, lights, but I hear no noise from the motherboard or the fan. The laptop is bought in July 2006 and it is out of warranty.
  All I see is a white screen.

  My guess is that the motherboard must be replaced. I have also had kept with Symantic anti-virus and windows updates XP before April 1, 2009.

  Thank you for your comments.

  Seyed

  You can see an image on an external monitor?

  Well, I think that in this case the laptop must be verified by the technician for laptop. You should contact an ASP and ask for help. It would be the best way because the technician can be sure what parts are defective.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Re: Satellite L300-1AS will not start

  Hi all

  Now my L300 will not start not (windows (Vista).
  It shows a blue screen saying that windows has been shut down and to check the installation of new hardware or software.
  There is no new hardware or software. He suggested to disable the bios memory options (I don't know how to do this) and suggests to start in safe mode to remove or disable components.

  The laptop does NOT start in any mode not to mention safe mode, repair mode that brings back me to the blue screen as described.
  I bought a Toshiba Recovery disk (a single disc happened?) that begins its process then two locks of "select a language to move forward" or detects an error and request I have "press any key to continue' what I'm doing, it then displays X:\windows\system32 > with the cursor flashing at the end of > and does nothing more , its been like that for 5 hours now... I'm supposed to type something in or I am looking at a new hard drive?

  Suggestions for a greatly appreciated numpty (outside to let computers alone numpty you of course!)

  Thanks

  Colin

  Hello

  Yes, the recovery disc's one disc it s DVD ;)

  Return to be issued;
  I think that it s material related since the recovery disk should work for sure.
  The blinking cursor can be related to a faulty memory or HARD drive.
  Both should be checked.

  You could remove a memory module and might try to power the device using a single memory module in a slot.
  Of course, the best would be a use of two new modules

  The HARD drive can be checked using a tool called Drive Fitness Test (it of free use google to find it)

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite Pro L300 will not start

  I have a portable Satellite Pro L300 and he won't start (in other words the power button and not going not past the first screen).

  Works for keyboard, but F2, F8 or F12 will not do anything, I can't here the disk hard powerup but it's like no one is at home. I don't know if it's the motherboard or the onboard battery. The computer is about 7-8 years

  Can anyone help.

  It s certainly nothing wrong with a RTC battery (as you said internal battery).
  The RTC battery can be charged. The unit must be turned on and adapter must be connected at least for about 18 hours.
  But I guess that this isn't a problem.

  The laptop does not start because of a hardware malfunction, but it's hard to say what role may be affected. But you should absolutely consult the RAM modules.
  This should be the first step, since the RAM modules are easy to replace.

  All other parts should be checked by the type of service.

• Re: Satellite M70-364 will not start

  Hi I have a satellite phone and it does not start. When I press the power button, I get the Toshiba sign, then a white screen. A few seconds later, it goes back to the toshiba screen. I tried another hard drive, but it is always the same. I can enter the bios and checked that it is set to boot from the hard drive and nothing else. But that left me speechless as to what could be the cause of the problem. Any help would be appreciated.

  Post edited by: monkeybhoy

  Hello

  You have a live Windows Cd to try to boot from it?

  > get the sign Toshiba and then a white screen. A few seconds later, it goes back to the toshiba screen. I tried another hard drive
  > but it's always the same thing.

  Makes me think it's motherboard (southbridge) failure. In this case, the entire motherboard must be replaced. Get the live Cd of Windows disc to check

• Satellite P300D-110 will not start up normally

  My P300 - 100 d will not be running normally.

  It crashes after the ad that Windows is starting.
  Firstly I have to boot in safe mode, and if I'm lucky it will start normal after choosing "restart".

  The strange thing is that this problem appears only after that the laptop has been stop for awhile.
  If I start shortly after a stop, there seems to be no problem. I use Windows Vista Home Premium SP1.

  Someone at - it an idea?

  TNX in advance!

  It is a strange question.

  Did you look in the event viewer? Maybe you can see something on this issue.

  In addition, I would like to make a BIOS update.

  Sorry that I can't give you more advise, but in his case, it is not easy to say what the problem is.

• Computer will not start after windows checkdisk thing?

  My office has gone through a few microsoft checkdisk thing today (16\11\2010), and after that it's over, my com could not start more.

  It would be to start all the way until the logo Windows XP there and after loading was done and usually, it would be a blue screen with your user account, but however he just showed a black screen and I waited a certain 20 minutes and nothing happened.

  Then, I tried to reboot 10 times over and always to the same black screen.

  When I tried the thing Safe Mode would stop any loading at some point of the code, which is

  multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system32\DRIVERS\agp440.sys

  That's what was on my setup on my desktop that I accessed:

  "Primary Master" > Hitachi HDP72502
  Primary slave > no
  Secondary master > HL - DT - ST GCE-852
  Secondary slave > HL-DT-STDVD-ROM

  Basic version of the BIOS > V6.0
  Revision of BIOS 3.25 23/09/2003

  Anyone know what is happening and how can I solve this problem?

  In the Boot Options menu advanced F8, choose this option and describe the results:

  Disable the automatic restart in the event of system failure

  Let us know if you do not see this option in the Advanced Boot Options menu.

  You will not get far if you can't start something, so if you have a CD/DVD player, do you have a bootable XP Recovery Console in order to have room for manoeuvre, boot on the CD, run chkdsk /r and then you can start solving the problem (instructions below).

  You are once started in the Console recovery XP and after running chkdsk/r, then you will be able to see if KB324764 will help you.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Satellite A300-259 does not start on windows

  Hello

  I have a laptop Toshiba A300-259 and I have problems trying to get into windows.
  When I try to start my laptop, it would remain on the screen of the Microsoft logo with no response. I tried to use the HDD recovery procedure (link below) but if the screen jumps just to load Microsoft. I tried also security mode, but when it finishes loading all the drivers it just freezes.

  Is that what I can do before purchasing a toshiba recovery media disk?

  HARD drive recovery procedure

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  Hi mate

  Well, if you didn t create a recovery disk previously, you must purchase a new recovery disk.

  If the Windows operating system starts not using safe mode or normal mode and if the HDD recovery procedure does not start then I n t see other options for you to try the recovery disk.

• Satellite P10 554 will not start! Please help ASAP!

  Hello, please someone help as soon as possible.

  I got it for a few years now. A keyboard replaced Germnan to English.

  Used it three days ago and was very good. It shows no signs of something not ussual.

  This mornign however, I pressed the "power" button and not started. I tried to connect the battery, no indicator light came.

  I'm lost-don't know what to do.

  Please help someone?

  Thanks in advance

  Hello Morta

  If the unit is connected to the power supply and if there is no response after pressing power button must be some hardware malfunction. Press the power button and hold down for a few seconds. I put t know how old is your device but it is possible that the warranty is still valid. Please contact the customer Service of your country partner and let check the device. The warranty will cover the costs.

• Satellite Pro A60 will not start up CD/DVD

  I have the above and it does not start from cd/dvd. I know that the cd/dvd is bootable and works well. I can boot from the floppy drive and access the cd/dvd without problem, but that dose not allow me to load windows XP. If this is not the drive or the cd/dvd. So what is the problem?

  Paul

  Hello

  How did you try to boot from the CD drive?
  Have you tried to press the C key immediately after starting the laptop?

  Alternatively, you can press F12. The start menu should appear and you should be able to choose the drive as a boot device.

• Re: Satellite T110-107 will not start in the form of recovery option using the f8 key.

  I tried several times and can't get the option of recovering your system by typing intermittently the * key f8 during the startup * as it says in the manual, it will just directly in Windows. I just installed the latest version of the BIOS, but that did not help either. I have no recovery discs, but I would get the f8 problem solved in any case. Everything else works perfectly. Thank you.

  Hello

  Maybe you didn t press F8 in the right way
  You must press F8 immediately after the laptop has been powered!
  Press several times to be sure 100%

  If this does not work, create the recovery disk! This should be done first before you do anything with the laptop!
  The recovery disk is always important and useful if something goes wrong with the HARD drive!

  After you create the recovery disk using this drive to put the laptop in the same State as on the first day of purchase