Satellite 2450-101 after the 60 GB HARD drive upgrade, made only to see 30 GB

Similar Questions

• Satellite C650D-112 - reinstall Win 7 after the failure of HARD drive

  The 320 HDD on my C650D-112 18 months, failed last week.
  I replaced it with a 128 GB SSD and it now boots into Windows 8 preview in about 10 seconds!

  I have a copy of the disk HARD original including the recovery of HARD drive Partition, but no recovery disk.
  I can't reinstall drive would work I had been a responsible adult and created the disk when the laptop is new because the disk is smaller.

  Is it possible to reinstall the original Windows 7 Home Premium operating system of the copy of the HARD drive recovery Partition?

  > Is it possible to reinstall the original Windows 7 Home Premium operating system of the copy of the HARD drive recovery Partition?

  No, to my knowledge, this is not possible, even if you copy the contents of the recovery of HARD drive on the new partition on the new HARD drive, HARD drive recovery option does not appear in the advanced boot menu.
  So, it seems you need to order a new drive to get here:
  http://backupmedia.Toshiba.EU/landing.aspx

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• Windows 7 will not activate with the OEM key, after the failure of HARD drive.

  Hello

  I was recently asked to repair my brother DELL laptop.  The HARD drive failed and the system unusable.  I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media.  The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.

  The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid.  I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case.  The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.

  I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).

  Any help would be greatly appreciated!

  Thank you

  Brian o '

  Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC8177E3-D2B0-45ED-B79B-E129894262D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1225630707-1574482703-4192685535Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F804090409Time(GMT-05:00) Standard is03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
  Installation ID: 004806170012218410865063155553272544088463952332351022
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: initial grace period
  Time remaining: 43080 minute (s) on (29 day (s))
  Remaining Windows rearm count: 3
  Trust time: 31/03/2013-02:23:35

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  OSFR DELL WN09
  SSDT PmRef CpuPm

  you use an OEM SLP key that only works with the manufacturers recovery media.

  change the product key to that on computers of COA
  Click Start, type slui3, press ENTER.

  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Satellite 2450 S203: SMART HDD can fail - HARD drive change?

  Hello

  My Satellite 2450 S203 seems to run slow extremeley (20 minutes to start windows!). I get a warning in the Manager of Toshiba hard disk may fail soon.

  I guess I should do a new hard drive? Is it possible to fix it? If not, what type of replacement hard drive should get?

  Thank you
  Andreas

  Hello Andreas

  If the HARD drive has a mechanical problem it aren't there has not much to do and you should buy a new HARD drive. But before this I recommend you to do the clean install of OS and see how the laptop runs. After the long period of use and many facilities that the OS will be slower and slower, but 20 minutes is definitely too long for the start-up procedure.

  According to specifications specification must be 40 GB of HARD drive. I'm sure that for the upgrade, you can use 60 GB HARD drive. On this HARD drive replacement is quite simple and you can do it alone. If you n t do this please write again.

• Satellite 2430-101: external USB 2.0 HARD drive problem

  Hello everyone,
  I have Toshiba satellite 2430-101. Recently I bought external 40 GB hard drive. When I connected to my toshiba usb hub, it is said that it exceeds the limit of the power, and I need to detach the external hard drive. When I read these last questions, someone suggested to uncheck the power supply to the usb hub options, but he says always the same. They are someone to help me.
  Concerning
  Sri

  Hello

  Well, in my opinion, this problem occurs if the USB port can't provide enough power.
  In this case, that the USB hub must be connect to external power.

  Good bye

• Satellite 1410: I forgot the password for HARD drive

  Hi Please help!

  I have toshiba satellite 1410 series...
  I think that the hard drive was full and it was locked.
  I really need to get to this unblock as im very new to comps. whenever I start my pc it ask me password for HARD drive...
  I need all the help to get this open

  Help, please

  Hello

  AFAIK, you need the old HARD drive password to clear the password disk HARD asking.
  If you have forgotten the password to disk so you don t have any other possibility to get into the HARD drive. In this case, the HARD disk is unusable and unfortunately you need a new HARD disk drive. :(

  Best regards

• Pravilion dv7 series replaced after the recovery disk hard drive failure

  I tried to use the portion of my drive recovery hard when my laptop Pavilion dv7-4173 US could not operate.  After trying the hard drive recovery part several times I got an error message saying that the bootmgr is missing. I tried using the recovery discs I got to the store, I bought the computer before taking it home, and they failed. They worked up to 32% and then stopped.  I took the laptop and recovery (6 discs) disks to the tech Department of another retail store. After several days, I learned the recovery disc where no good/damaged. When I contacted the store bought told me that I had to bring in the laptop and recovery disks. They replaced the hard drive, saying: that was the problem, but do not partition. They decided to classified until the system OS of Windows 7 Home Premium 64-bit for Windows 7 Professional 64 bit., but did not try the recovery disks. Can I use the recovery disk, they made me, if are good restore the laptop back to factory new?  I know he will place the operating system Windows 7 Home back on the computer, but I want that all return provided with computer programs. I'll be able to upgrade the Professional operating system? I have the disc of Windows 7 Professional.  If my restore disk will not work, can I use the recovery disc, only 2 discs instead of 6, I can buy from HP and then move on to professional?

  Thank you.  Computer to factory fresh.  Just update software and then go to Windows 7 Professional

• How to make a system total main saved sauvegardΘ Vista restoration complete after the death of HARD drive external HARD disk

  I had to replace my HARD drive once it's dead, I have an external hard drive with a complete picture of my old drive, but cannot access it.
  My operating system is Vista Home premium and I don't have a disc, it's all about the old HDD. I tried to boot from the image. did not work.
  HELP I need my urgent files

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Vista Home Premium not let you do a full backup of your hard disk Image. read the above info.

  If you use 3rd Party Software to make the Image, you need to restore.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media to back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• iMac 27 "mid-2011 hard drive failed, fan to full after the removal of HARD drive

  iMac (27 inch, mid 2011)

  2.7 Ghz i5

  12 GB of RAM

  I have a fault where the HARD drive fan runs at max speed (RPM 5431, 51 * C temp).

  The first symptom was a rattling noise from the factory 1 TB HARD drive, which has disappeared from the system, to be replaced by a disk of 4 GB in size. Then the fan started running at max speed.

  A few months ago, I installed a 2nd drive HARD, an SSD and use this to all the data, so the 1 TB drive HARD original was basically unused and empty. To try and stop the fan and also run the disk diagnostics failed I've removed it from the iMac. However the HARD drive fan is always full.

  I ran the Apple Hardware Test and received the error message: 4SNS/1/40000000: TH00 - 9,000

  Given the primary SATA HDD is now removed, I also set the temperature probe? Are there other fixes to this problem of fan? I didn't intend on replacing the HARD disk immediately that this is not necessary at this stage.

  Thank you!

  Shaun

  shaun02 wrote:

  I ran the Apple Hardware Test and received the error message: 4SNS/1/40000000: TH00 - 9,000

  Given the primary SATA HDD is now removed, I also set the temperature probe? Are there other fixes to this problem of fan? I didn't intend on replacing the HARD disk immediately that this is not necessary at this stage.

  Yes, take a look on > acs http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im

• Need help to access information on the model after the death of hard drive.

  The hard drive on my 13 mid-2010 "MacBook Pro went a few months ago and I intend to replace it with an SSD (and the upgrade of my RAM so I'm here). The thing is, since he's already dead I can't boot my laptop to find the info on the model in order to select the right SSD (and RAM). How can I get this information?

  A MacBook Pro 13-inch Mid-2010 will be a model A1278 number and an identifier of model MacBookPro7, 1.

• loud fan after the addition of hard drive noise

  I installed a second hdd in my Mac Pro 2008 and as soon as I started there was a noise constant very loud fan as I never had before. Here's what I put: WD2003FZEX WD Black 2 t 7200 RPM SATA 6 gb/s 64 MB cache. I formatted using disk utility. This is my first time, install a hard drive and I basically screw them into the bracket and connected. Did I miss something?

  Try resetting the SMC

  Reset of the management system (SCM) on your Mac controller

• Satellite L735 - cannot start the backup of HARD drive

  Hello

  I want to buy a new HDD in my laptop a L735. Before doing this, but I need to back up the windows installation files. Whenever I try to do a backup, but it does not allow me and a message appears on the screen saying that it is not possible. Here's a screenshot of it:

  http://img694.imageshack.us/img694/7088/screennv.PNG

  Could someone help me with this please?

  Kind regards
  Darren

  >... I need to back up the windows installation files
  What you try to do is not the Windows installation files back up but the creation of recovery disks.
  For some reason of original Toshiba recovery image cannot be found or detected on the HARD drive. I don t know what that you did, but it can happen if hidden recovery partition is deleted or partition structure has been changed.

  Do you have more questions?

• How to regenerate the thumbnails of the Photos after the restoration of hard drive?

  Hello!

  A few weeks ago, our drive hard iMac failed and was repaired under the hard drive replacement program. I have restored our our last backup system, but all of our photo in photo thumbnails are black or white with no details. When we open a photo, that is, but the thumbnails are not visible, making navigation impossible.

  I tried to repair the library. Who did nothing.

  I tried to turn the photos. Turning the last import (300 photos) two-way regenerated the thumbnails OK, but it took 6.5 minutes. I 80 000 pictures. According to my estimate, that makes a little more than 12 days (assuming a linear extrapolation, in any case), during which my CPU will be under a lot of stress.

  I also noticed that the rotation thing has no effect for videos.

  So I thought, as a last resort before putting my Mac in two weeks of enforced non-toucher, I would like to ask if anyone had other ideas.

  Also, does anyone know how to regenerate the photos to the videos?

  Thanks in advance!

  -Mike

  Try first to turn a lot of direction tiles 90 ° and 90 ° backward.  See if that will restore them.  If it works then make lots at once, not the entire library.

  If it does not try to repair the library according to the instructions in this document to Apple: Repair Your Library.

  Warning: If you use iCloud photo library with Photos, this operation will lead to Photos to upload all your pictures again (of difficulty missing or incorrect thumbnails in photo - Apple Support).

  

• Satellite 5200: Question on the differences of HARD drive.

  Hello
  my laptop HARD drive is damaged; and I would like to buy a new one. The problem is that I don't know what model of hard disk it is. Do someone know the difference between disk PA combat * and MK *?

  Thank you very much...

  Hello

  Well, as far as I know, it is a special part number identification but I put t found exactly the information.
  But I found a HARD drive that is compatible with this unit.
  It is s a 60 GB HDD, PA3306U part number - 1 H 60.

  Good bye