Satellite 2450-201: do I have to use the wireless network?

Similar Questions

• Satellite 2450-201: is it possible to upgrade the P4 to Athlon processor?

  I have a satellite 2450-201 and it came with petium 4 I want ypgrade to the athlon 64 x 2 will be this possible upgrade for my laptop?

  No, it is not possible.
  The Pentium uses different fixing like the athlon.
  In any case the portable technology is different because the desktop PC simply and miniaturization make these updates impossible

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Satellite Pro U400 (XP pro) cannot connect to the wireless network

  I got a U400 straight out of the box. I installed XP pro through the disc of recovery without any problem, except that I am not able to connect to the Wi-Fi here. (Other devices connect very well so the problem is at the end of the laptop) I tried to update via windows update (SP3) via a wired LAN connection but still the same problem. Other posts here have any suggestions for downloading new drivers from realtek. All of the solutions presented do not work for me. Anything else I can try?

  I am able to see all the wireless networks that are available in the range and may try to connect (provide the WPA password) but after watching the "preparation to connect" screen for a while he seems to abandon without reporting any error

  Hi guys

  First check if you are using the latest version of the BIOS.
  Second, clear all options of the router WLan security (filtering by MAC address, Firewall, encryption of WLan, etc.) and try to establish the WiFi connection.

  If you're going to succeed the problem is certainly related to the encryption settings
  Step by step, activate the settings and set up the router again.

  Good luck

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• Satellite P10: what do I have to use the Wlan?

  I had just a P10 (barely used) and would like to know what equipment I need to set up the wireless part? Thanks much for any help.

  oldsmudger

  Hello

  I have goggled autour and found 3 different wireless network cards that are compatible with your P10:

  -Wireless LAN card PA3212U-4MPC (Agere 802. 11b)
  -Wireless LAN card PA3300U-1MPC (Atheros 802.11 g)
  -Wireless LAN card PA3298U-1MPC (Atheros 802. 11a / g)

  You can also contact the ASP in your country to order a compatible part.

• Satellite P20 S203: How can I use the wireless network card?

  Hello
  first - sorry for my English. I have toshiba P20 S203 (I know - old hardware).
  I read a few descriptions on this computer and I know that the model probably have wifi. I see on the left side of my laptop, but don't see it Win Xp Pro Sp2.
  How to turn on and connect to my lan wirreless?

  again sorry for my English...

  Hello

  As mentioned the laptop has no installed wireless network card, but you can improve with one compatible.
  The minPCI card has two cables; Brown and white.
  Usually the white cable be connected to the hand and Brown to the

• Cable connection part for good - once I started using the wireless NETWORK card!

  Hello

  I went although all people in support on this issue, but now I have no other choice than to ask all you people here!

  That is the problem. I have two computers with multiple network cards. One is a laptop computer with wireless Draft-N support and 10/100/1000 NIC onboard. The other is a desktop computer with an ASUS Wifi b/g edge and also dual GigE ports nVidia graphics card.

  Whenever I try to use network wired for internet or local network even cards use, it died on me. It is impossible to obtain an IP address from the router to use and is unable to communicate with anyone at all. Not even with my local network or even directly to the router (192.168.1.1). If I turn on the wireless card, it connects and everything is groovy (except that I lost my GigE connection to my local network, which is most important!).

  I havegone through the standard fare of cyclic power to the router and cable modem, reboot of my machines, etc. all the normal things, we are required to do.

  After some hassles with the support of Linksys to get them to send me a new WRT330N, I finally received a new WRT310N and it shows exactly the same problem! Wireless connections work fine, but as soon as I disable the WiFi and wired go, Windows XP gives me nothing else than a message "limited or no connectivity" and let me out of the network.

  This leads me to think it's some sort of network problem due to multiple MACs on the same host name. Does anyone know how to get around this problem?

  Thank you!

  Disable the firewall on the computer and then also try to connect the computer to the modem and check if the computer is able to connect.

• Portege 7220: Can I use the wireless network?

  Hello, I think to buy a Portege 7220 but need to know if it is possible to connect wireless to my office. I know how to configure the desktop computer, but I'm not yet sure on laptops. Do I need a pcmcia card? or something like that?
  Thanks in advance for any response.

  Hi, Sandra

  You are right. If you want to use the WLAN you PCMCIA WLAN card. You can buy it in every store of PC.

• Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

  Hello

  This is my setup
  Computer: Satellite Pro 4600 model ps460e 02hyt en
  Operating system: Windows XP SP3
  Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

  My problem:
  The operating system has been improved in win 98se to windows XP SP3.
  The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
  Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

  Please I wait your help

  Thank you

  [email protected]

  I imagine that it will be compatible with SP2 well. You can test it please and post the result?

• I constantly have to "reset the wireless network adapter.

  Installation program:

  Ethernet to the modem router then:

  Ethernet to the router to the desktop

  Ethernet router to Ooma (phone)

  Ethernet router to Sonos Controller

  About 1/2 a year ago, I would generally lose my internet connection Wireless one or twice all the hours that I was using my laptop.  I kept having to "Reset Wireless Adapter.  A roommate using a different Dell laptop (not sure what model) had no problems with dropouts.  I lived with the problem b/c I mainly use my office.  Now, my office is having the same problem.

  How can I solve this "problem"?  I work from home and I can't have my connection drop-outs all the time.

  TIA!

  System information:

  Dell Studio XPS desktop running 8100 Windows 7 Home Premium Service Pack 1

  Network card: Broadcom Netlink Gigabit Ethernet PCI express x 1 (OEM)

  Network card: Qualcomm Atheros DW1525 (802.11n) WLAN PCIe (OEM)

  -----------------------------------------

  Laptop computer Dell XPS 1647 running Windows 7 Home Premium Service Pack 1

  Network adapter: Intel Centrino WiMax 6250

  Network adapter: Intel Centrino Advanced - N 6250 AGN

  Network card: Broadcom Netlink Gigabit Ethernet PCI express x 1

  Network card: Dell Wireless 370 Bluetooth Mini-card (never use Bluetooth)

  --------------------------------------

  Router: Netgear WNDR 3700 (have had for 3-4 years)

  Modem: Motorola SB6141 Surfboard

  ISP: Time Warner

  Two things that helped the wifi dropouts (win 10):

  1. go to the adapter in the Device Manager wireless and defeat the "n" mode in advanced settings.

  2. change the address of the automatic DNS server as an open server. Open usual address is: primary 208.67.222.222 and 208.67.220.220 secondary.

• Satellite 2450-201: cannot use TV option after the new installation of the OS

  Hello

  I have a laptop toshiba satellite 2450-201.
  I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
  I was able to watch divx movies in my TV using my computer.

  I had to format the laptop and installed windows XP again.
  After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
  After that I updated display drivers, but the problem remains.

  Can someone help me?
  Thank you

  Hello

  How do you reinstall the operating system? Have you used the recovery CD?
  Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
  It is important that you can switch to the TV. In this case, you can use FN + F5.
  If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

  However, check it and check if you have installed all the drivers.

• Satellite 2450-201: impossible to format SD card 4 GB card

  Hello

  IA´m an owner of Satellite 2450-201 and I have a big problem.
  I just bought a 4 GB SD memory card and Nice, it adapts to the side slot on my laptop.

  This is the first time using the memory card, so a needs-to-format window appears when I try to access.

  The window has the right information: 3.78 GB, Fat32,...

  I click 'OK' and informs the Windows (XP SP2): impossible to complete format (here is Portuguese, then it is translated into English)

  If the correct size is informed, 3.78 GB, why windows can't format it?

  My laptop is virus and spyware free (only 23 spots in the running and supervision), I have SP2, Bios (most recent) 1.50, SD my controller drivers is up to date (the last and the only one that was released in 2003).

  Also tried third party "Panasonic SDFormatter 2.0". He reports the (physical) unit or the mem SD stick is not compatible with the program. And the same effect occurs: the Sd device lost the nice icon and I need to remove/insert the SD card to see again the same story.

  Help me please, friends.

  Hello

  It of very strange that you re possible to see the plugin SD card. Some people suggested that this SD card supports only 256MB, 512 MB cards and more with no MMC support.

  I put t know if you have a format utility Toshiba SD card installed on the laptop, but on many notebooks of utility such Tosh is preinstalled and could be used for formatting of the card.

  According to some poster in this forum the Portege M400 utility format could handle 2 GB, but not sure about 4 GB SD cards.
  If possible, you can try to install this utility on your laptop, but you know you don't have much chance that it works.

  I think that in this case only an external SD card reader will help you.

• Need new hinges to Satellite 2450-201

  The hinges on my * Satellite 2450-201 * are turned away.
  Are the hinges on the - 101 previous model the same i.e. P000368300 and P000368310 and if so, are still available. If not, can anyone advise please.
  Any info gratefully received.

  Hello

  I think you should get in touch with a local ASP (partner).
  The ASP can help you order the right parts.

  Because this laptop is an oldie, I doubt that you get these pieces from an online retailer
  However, google may provide you with some offers if you are looking for unique part numbers

  In any case, all the possible parts could be ordered in service partner as I said above, for me, it looks like an easier way to get these parts.

• Satellite 2450-201: nVidia display driver

  I just downloaded the latest driver from nvidia display for satellite 2450-201 of toshiba and now the screen went worse the driver is 3.6.4.8. for nvidia gforce 420 go what I'll do I tried to roll back, it won't let me! and I have not a system restore point nor is there some settings using nvidia!

  Hello

  I checked for your device and Toshiba download page, there is only one display pilot available (v 36,48). Can you please tell us what version number has this driver and where exactly did you find?

  Try to uninstall it from the Device Manager, restart the device and install version 36,48.