Satellite 2450 doesn't start plus-alerte

Similar Questions

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• Satellite C660 - 2 EV starts plus-Boot not found Bishop

  I don't know how but my grandson has seriously broken the Satellite C660 - 2 EV

  Boot from the disk - Boot Mgr not found

  Boot from the recovery partition - Boot Mgr not found.

  Boot from an installation (generic) Windows 7 disk - boots, begins to install, finds, he does not have a required driver (but don't tell me what it is). Allows me to access the drives C:, D:, E:, and X:

  Boot from recovery Toshiba DVD. White bar gets about 25% on the whole of the screen then stops with "You have removed a USB support during installation" (or something like that, laptop currently in pieces).

  Removed and replaced the memory and DVD player. Removal of the HARD drive connected to my PC via the USB adapter and scanned the two visible partitions (300 GB each) at the level of bad sector. No problems.

  Help! I'm out of options.

  Laptop must be functional (basically) as it starts from DVD (non-Toshiba).

  HARD drive seems OK when verified externally and start (Non-Toshiba)

  What remains?

  Everything that you have done is good, and I would do the same tests.

  The value of the default BIOS and test it with another HARD disk, if you can get one for testing purposes.
  I can't say for sure, but somehow, I feel THAT HDD is the troublemaker.
  Try installing the DVD of initial recovery on the new HARD drive.

• Satellite A200 doesn't start and clicking noise

  Problems with my A200 Satellite, which is about 2 years old. 2 days ago, only it beeps once. I have

  continued his work then stop down without any problem. I rebooted again and had no problems. Then, since yesterday it will not passed Microsoft logo at the beginning upward. After waiting a while there is a click from him. Pretty much the same thing happened to me the year last with the same laptop. From scratch and reinstall the operating system solved the problem (so far).

  Of course, I can do this again, but I want to know if it of a known problem with this type of laptop or is it something I'm doing unintentionally?

  Thank you

  Hello

  You say about an entry by clicking on it. It can be HARD, I guess. I recommend you save all necessary staff if you have and be ready for its malfunction.

• Satellite L300 doesn't start after upgrade memory

  I have a L300 (model PSLB0A - 08H 022 number) which came with 1x2GB ram. All the info I can find suggests that it can accept 4GB.
  I installed a second 2 GB of Geil DDR667 key and the system came with a lack of memory and could not start.

  Then I traded my single stick for a pair of the same, but I get the same result.
  One of the three sticks work in itself, but no combination of two works.

  I ran memtest with the two installed Geils and it resulted in a corrupted display.

  Can anyone help?

  Hello

  I think that the laptop supports only 2 GB of RAM due to the capacity of the Intel mobile chipset.
  You can check you chipset in the L300 PSLB0A - 08H 022 could and then check the properties on the Intel page.

  Welcome them

• Satellite 2450 auto start after stopping down

  My laptop is a satellite 2450 and he began to turn on when I stopped him.
  I think that this is a power supply problem or a problem of mtherboard.

  Other users had this problem and what was the cure?

  Thank you

  super1

  You have a connected network cable? Maybe Wake-On-LAN is enabled.

  Or maybe the LCD lid switch must be a pure: p

• Satellite 2450-S203 - installed XP SP1 of recovery CD - cannot update

  The hard drive on my Satellite 2450 S203 has not then I replaced and installed XP from the recovery CD. Everything's fine. I now have a PC running XP SP1.

  I tried the update of XP start > all progtrams > Windows update but it failed, the updated software I used was not compatible with the update site or something similar.

  I found a site of Microsoft, who said I had to install SP1a and then put to SP1a update to SP3. I downloaded the SP1a installation tool and it seemed to do things, and I'm guessing that SP1a installed OK.

  When I go to start > all programs > Windows update, the update starts OK but after a few moments, I get an error message on the Microsoft Update Server does not.

  * Question 1: *-anyone have any ideas what I should try next?

  * Question 2: * fact Toshiba have nowhere where I can download a more current version of XP - SP2 or SP3 say - so that I can eventuially happen to SP3 without SP1?

  Any thoughts are welcome!

  > Question 1: someone has any good ideas what I should try next?

  Win XP SP1 is part of SP2. So, you can download the SP2 package from Microsoft or any other Windows pages page just google
  So after installing SP2, you can follow with SP3.

  Before you install SP3, you will need to install SP2 first

  > Question 2: Toshiba has nowhere where I can download a more current version of XP - SP2 or SP3 say - so that I can eventuially happen to SP3 without SP1?

  On the pages of Toshiba, you can download only the drivers and Toshiba tools
  Windows Service Packs are Microsoft products, and you should check the Microsoft pages for this.

• How to replace the hard drive internal on Satellite 2450?

  Hello!
  Last month, after a BSOD displayed (I don't have the code of error message, unfortunately) my laptop decided to not work again.
  At the start, he reached the start menu and then displays a black screen... no message, no auto restart... nothing. Just a weird noise coming from the hard drive (like a scratched cd).

  I tried to format the drive, but without success. After choosing the boot source, trying to read the cd and the black screen appears again, with no message. I checked if the Bay of cd is not working properly and it is. (I think)
  So I replaced the HDD in my satellite 2450. A new toshiba ide 2.5 30 GB hard drive. But when I install a new one, the system does not recognize.

  The control panel of the Bios says that "no hard disk" is available, and I can not change this option. (locked)
  With the Windows Xp cd in the drive, the Setup program runs all properly until the 'select drive' format menu, witch says that no hard drive is recognized (with a new drive hard in).

  I don't really know what to do!
  Is something missing in this process?

  Thank you for the patience

  Hello

  The laptop did not recognize a new HARD drive. Which is one reason why Win XP cannot follow the additional installation steps

  I can't say exactly why the HARD drive is not recognized, but the 30 GB IDE should be ok.
  I remember one of my friends had a similar problem with the new HARD drive.
  Some hard drives have a jumper (3.5 HARD drive and 2.5 IDE HARD drive too)
  Maybe you should check if a rider has been set to the right position (slave?).

  Check it otherwise that I recommend to test with another new HARD drive

  In the worst case the disc HARD controller might be faulty, but it would mean replacing a motherboard

• Files corrupt on Satellite 2450

  Hello world
  about a year on a toshiba laptop - info below - my wife has complained that its files in Word 2003 have been mysteriously transformed into unreadable garble.
  Text became symbols... or, a translation box appears, but there is no way to return this mutilated in its original file. Most of his recorded pictures have also disappeared. (The files remained, but each page was empty when opening). So I wanted to put this on this forum and see exactly what the Devil's going on.
  I had my own problems with the laptop. I transferred more than 2100 JPEGs of my drive hard iomega and created a disc using nero. Everything was fine until I saw the disc on another dvd player - info files were black, some pictures would be partially visible, and the disk drive had trouble reading the cd. When I plugged in my Iomega hard drive in our old workhorse 98se and used an older version of nero, I got the cd and it played perfectly in 2 separate dvd players.
  Operating system system model
  Windows XP Home Edition Service Pack 2 (build 2600) TOSHIBA Satellite 2450 PS245C-04P40P
  System serial number:
  Case type: NotebookProcessor a Circuit Board printed main b2.80 gigahertz Intel Pentium 4
  8 kilobyte primary memory cache
  cache of 512 KB secondary memory board: TOSHIBA Portable PC Version A0
  Serial number:
  The bus clock: 133 megahertz
  TOSHIBA BIOS: Version 1.10, Modules of memory 01/20/2003Drives c, d60.01 gigabytes usable hard drive capacity
  36,60 gigabytes of free disk space

  TOSHIBA DVD - ROM SD-R6012 [CD-ROM drive]

  EPSON Stylus device [hard drive] storage USB - drive 1
  HITACHI_DK23EA-60 [hard drive] (60,01 GB) - drive 0, s/n 578100, rev 00K2A0A1, SMART location: healthy 512 MB installed memory

  Slot machine ' DIMM 0' has 256 MB
  Slot machine "DIMM 1' has 256 MB of Disk Volumes Local c: (NTFS on drive 0) 60.01 GB36.60 GB free

  Hello

  seems that the hard drive or RAM is defective. I don't know, but if I were you I exchanged these components as your problem doesn't sound like a software problem...
  First try to replace the memory modules because they sometimes are the main reason for this error. I would test the modules with "SuperPi" before replacing the RAM. The same should be done with the hard disk, depending on the manufacturer of the HARD drive, I would check the Web site of the manufacturers for some specific tools of the reader to check if the drive works properly.

• Satellite 2450 S203: registration issue

  I am the owner of a Satellite 2450 S203 and I can't find it on the recording of "my computer"? any idea?

  Hello

  You can try other toshiba sites around the world. Start with toshiba.com, I don't know where you are, but for example, I am from Turkey and my satellite SA30-303 does not appear in the U.S. site. This can be the same kind of problem. Some models of satellite are not sold in some countries I think.

  In addition, yet once I'm not sure of your model of satellite, but you can see the discontinued models.

  Kind regards
  Halin

• Wireless Configuration - Satellite 2450-401

  Hello

  I need a crazy question. I have a Satellite 2450-401 and have tried to configure the Protocol wireless / drivers. Unfortunately, I can't. Reason is that when I go to the system, hardware - device manager - open network adapters, the option for the wireless isn't here! How is it?

  I greatly appreciate it if you could someone answer the query for me.

  Concerning

  Sham

  Hello

  are you sure that you have a wireless network card installed in your machine? If there is no Wifi card in then there will be no possibility to implement. If you do not, you could buy a card and start using the wireless network.

  BR

  Tom

• Satellite 2450 recovery disks completed - is there a life after their use?

  * Request to help.

  After the failure of the January 16 system have reinstalled Windows - according to my TOSHIBA manual,
  between the provided 2 Recovery CD - on my Satellite 2450.

  After seeing the TOSHIBA & SYMANTEC 1.0.1.0 Recovery Utility screen display progress
  during 21 hours - insert disk 2 according to the instructions of the screen along the way-
  in the end, I was left with white screen apart from a quick drive C.

  I'm not sure as to the appropriate action necessary to continue the recovery.

  Correct procedure of REQUEST for restoration.

  Kind regards.

  1.4 Mb boot disk using can see that C: has what appears to be the XP files.

  -a file, SYSPREP, which, with another machine that I see, contained below.

  Volume in drive G has no label.
  Volume serial number is 0EEE-1724

  Directory of G:\SYSPREP

  17/01/2003 07:40

  .
  17/01/2003 07:40 ...
  2002-08-29 13:00 16 384 SYS. EXE
  2002-08-29 13:00 27 357 CVTAREA. EXE
  2002-08-29 13:00 32 768 POWERCFG. EXE
  20/09/2001 13:40 WINBOM.000 588
  25/02/2002 09:52 153 SYSPREP. INF
  2002-08-29 13:00 112 640 SYSPREP. EXE
  2002-08-29 13:00 24 576 SETUPCL. EXE
  2002-08-29 13:00 50 055 OFORMAT (a COM file)
  2002-08-29 13:00 15 360 NETCFG. EXE
  2002-08-29 13:00 46 592 MSDINST. EXE
  2002-08-29 13:00 120 832 FACTORY. EXE
  2002-12-09 09:12 1 170 POSTINST. CMD
  28/01/2003 10:49 3 854 WINBOM. JOURNAL
  28/01/2003 10:53 2 056 cleandrm.log
  14 file (s) on 454 385 bytes
  2 dir 27,927,805,952 bytes free

  Try a Normal startup of the machine after a few seconds returns due to:
  quote
  Windows could not start because the following file is missing or corrupt:

  (Windows root)\System32\Ntoskrnl.exe

  Please reinstall a copy of the above file.
  end of quote

  To quote Microsoft Help
  This behavior can occur if one or some of the following conditions are true:
  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.
  Windows XP is not installed in the location specified in the Boot.ini file.
  The Ntoskrnl.exe file is missing or damaged.
  The path of partition in the Boot.ini file is not set correctly.
  General failure. end of quote

  There is an Ntoskrnl.exe file in the Windows folder and boot.ini seems to satisfy.

  G:\>debug boot.ini
  d
  0AF0:0100 5 b 62 6F 6F 6 20 74 6F 61 64 65 72 5 d 0 a 74 [boot loader] 0D... t
  0AF0:0110 69 6 D 65 6F 75 0 a 30 3D - 0d 74 64 65 66 61 75 6 imeout = 0.defaul
  0AF0:0120 74 3D 6 D 75 6 C 74 69 28-30 29 64 69 73 6 28 30 t b = multi (0) disk (0
  6 b 29 72 64 69 73 28 70 30 0AF0:0130 - 29 61 72 74 69 74 69) musicshe rdisk (0)
  0AF0:0140 6F 6th 28 31 29 5 C 57 49 - 4 44 4F 57 53 0D 0-5b on (1) \WINDOWS... [
  0AF0:0150 6F 70 65 72 61 74 69 6E 67 20 73 79 73 74 65 6 D operating system
  [0AF0:0160 73 5 d 0D 0 to 6 D 75 6 C 74-69 28 30 29 64 69 73 6 s b]... disc multi (0)
  0AF0:0170 28 30 29 72 64 69 73 6 b - 28 30 29 70 61 72 74 69 (0) rdisk (0) left
  d
  0AF0:0180 74 69 6 28 31 29 5 c 57 6F 49 4E 44 4F 57 53 tion 3D (1) \WINDOWS=
  0AF0:0190 22 4 69 63 72 6F 73-66 74 6F 20 57 69 6th 6F 64 'Microsoft Windo.
  0AF0:01 A 0 77 73 20 58 50 20 48 6F - 6 d 65 20 45 64 69 74 69 ws XP Home Edition
  "0AF0:01 B 0 6 22 20 2F 6F 66 61 73 - 74 64 65 74 65 63 74 0d on" / fastdetect.
  0AF0:01 C 0 to 0 4th 2F 6F 45 78 65 63 - 75 74 65 70 74 49 4F 3D. / NoExecute = OptI
  D 6F 0AF0:01 0 0D 0 a 57 B8 00 6 BB-40 00 33 C9 8B F2 BA 01 n... W... [email protected]...
  0AF0:01E0 01 CD 21 5F 73 15 02 00 74 23 3D 3D C4 - DB E8 03. ! _s....=.. t #=.
  00 74 0AF0:01F0 1st 3D 05 00 74 19 - E9 E3 D8 8B D8 B8 00 44. t. =... t........ D

  Hello

  You may also reinstall Win XP following this:
  Copy the folder i386 disk Win XP on the HARD drive.
  Then start the unit by using a bootable floppy disk and navigate to the i386 folder that you copied on the HARD disk.
  Here, you could use the winnt.exe command who would start the Windows INSTALLATION.
  Then simply follow the instructions on the screen to complete the installation.

  Welcome them

• How to boot from the CD from Toshiba - Satellite 2450-101?

  Hello everyone,

  I would like to know how to start from the cd to install windows xp.
  I have a toshiba laptop (Satellite 2450-101).
  I'm not sure but I think dat This model has a DVD player in scii. Dat is the problem?

  Kind regards
  Steve.

  Hello

  If you use the internal CD/DVD drive you press simply the C key immediately after starting the laptop or you will simply change the boot order in the BIOS to CD/DVD drive.

• Satellite 2450-201: slow startup and shutdown

  I HAVE A SATELLITE 2450-201 AND I RUN ON WINDOWS XP HOME EDITION, I DID A REGISTRY CLEANER EVERYBODYS USERNAME USING REGISTRY FIX 5.5
  I HAVE DEFRAGED MY PC AND ALSO OPTIMIZED MY MSCONFIG STARTUP ITEMS AND EVEN THE BIOS UPDATE.
  THE RESULT IS EXTREMELY FASTER WHEN I CONNECT AND ACTUALLY UNDER WINDOWS BUT THE SAME OLD VERY SLOW STOP AND START TO WHAT I DO.

  THE WINDOWS BAR GOING ALONG AT LEAST 15 - 20 TIMES TO HELP START!

  Hello

  Maybe you've connected to some external devices to slow down the start-up procedure. You can also try to disable all the hardware components you n t need (modem. IrDA). Also check out which device is defined in a first start time (I hope that the HARD drive).

  For slow closing is responsible only running processes that should be forced disconnected. It all depends on your own configuration and you are using external devices.

• On Satellite 2450 startup is too slow

  I have a satellite 2450-201 and latley taking his age to start up I did a reg clean and defraged my pc still takes a long time is there anything I can download that will make my laptop toshiba boot u faster please help

  Hello

  Check it please list all processes start when starts. You can do it on this way: choose RUN and type MSCONFIG. What configuration utility system is open to the Startup tab. All startup items are. Remove the check mark in front of the element that should not start with Windows.

  By the way: which antivir application runs on your device?