Satellite 2450 - the display hinges loose

Similar Questions

• Portege R700 - the display hinges are loose

  Hello

  my brand new R700 seems to have a bit of a monkey of surrender of a screen on this subject.
  When I use the machine at home, I'm sitting on a coffee table, titration so the screen in an equitable way back at right angles to the display

  If I then get the laptop to use it on mine... well, basically... the screen returns to fully open/flat right through the movement of lifting machine

  Someone else had a similar problem and if yes is it too simple that chew up the hinge bolts and how they access do?
  I rip portable outside all the time, but never a new brand that I'm worried about scratching, so I want to assure you that I understand!

  see you soon

  Ben

  Hello

  Don t have had similar problems with my laptop but maybe the display hinges are loose
  Usually, these hinges are hidden behind plastic chassis and you would need to disassemble the laptop to get access to these parts.

  In general I put t recommend disassemble this laptop pretty.
  First of all, you will lose the status of the guarantee if you would remove the plastic cover.
  Secondly, you may damage or break this, and I think that that's not worth a risk.

  If I was you, I'd spend low and ask a technician for assistance.

• The display is loose on my Portege R500 - how to tighten the hinges?

  The display is loose on my portege r500.

  Does anyone know how to tighten the hinges?

  Hello

  I think that this procedure is very delicate and in my opinion it s a job for a technician.
  I m don't know if you can tighten the hinges if necessary he s need to replace the old hinges

  Is it the hinges are hidden under the plastic around the screen frame.
  The LCD mask is fixed with screws I m but not quite sure how much could be three screws. They are hidden under the mask of small cushions.
  You will need to remove and the tightness of the extra mask.
  Then you can remove the LCD mask. The hinges should be visible now

  But there s more complicated as it may seem the R500 is a nice unit, and it would be a shame that you would damage the LCD screen. The LCD screen is an expensive part, and in my opinion it is worth to ask a professional for help

  Welcome them

• HP Envy 6 1080 ex the display hinges

  Left hinge of my laptop screen is broken. It wasn't any kind of improper handling. He's just on a part-by-part.

  I contacted the HP's Service Center and they said that this is the protection against accidental damage and unsecured. To apply for this, you must go to your retailer.

  I bought this laptop from Saudi Arabia in Oct 2012 Extra stores. I am currently in India.

  The warranty expires October 18, 2013.

  I contacted HP guaranteed people in this regard. Apart from the generated response automatically is there was no response from the people of HP. I sent their 6 Oct. Stores Extra pair did not.

  I googled "hp envy 6 1080ex the display hinges" and the first result I got was some complaints in the hp forum about hinge problems all over the world.

  I came to the conclusion than that a flaaw design. If HP must take care of this, even if it's not under warranty.

  I hope that someone from HP will help me.

  

  

  I have forwarded your message to the right people for their review. You should hear from someone bit via private Message on this forum.

• Satellite 2450 - free display

  My screen on my laptop has come loose.
  Anyone know how I can fix this problem? Thank you

  Hello Deborah,.

  I presume that the lid of your laptop does not stay in the open position normal, whereby the friction hinges have worn and must be replaced. There is no way to tighten up other than replacing hinges.

  Unfortunately, this should be done by an ASP because it won't be easy to buy new hinges. :(

  Kind regards

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Repairing damage dv6: the display hinges

  Well, to put it simply, my screen DV6 was open beyond its limit and ripped off.  This thing was sitting for a while, I didn't want to mess with it, until yesterday, I found that it still works fine, except a small gouge in the corner of the screen... so... I would like to see if I can get this thing back together.

  The hinges out of the laptop and have a plate towards the inside and the outside. Flanges from the outside have been uprooted and still attatched to the screen itself. More thick, inner flanges torn bosses screw out of the rear plastic shell.

  I tried to climb through JB weld, but the plastic is simply too weak to hold even temporarily the screen long enough to try and epoxying the other side of the hinge back together.

  At the flanges of hinge outward that the screen itself is around not broken, I'd get a new rear cover of the screen and swap everything out. But, as the metal hinges themselves need to be replaced, I'm lost.  Could I do it myself? I don't know if I'm sailing around I can find a diagram or something that could give me some clue. Someone did he do this type of repair before?  I'm not really that worried for the plastic hinges covers, but it can be other welded parts bradded or plastic, I'm not able to replace...

  You figure now, man would hide their valuables before you broke up with the girlfriend of crazy...

  Hey AndrewH85,

  I see that you have a problem with the screen and hinges.

  The best way to go here is probably find a technician to replace it for you.

  It's much more complicated than many people think, especially if you have a problem with the LED/LCD screen inside the screen.

  Now, I recommend to replace it yourself. You can call HP @18004746836 and see if they have an option to help you fix it.

  THX buddy!

• Re: Satellite S2540-101 - the display hinges are dead

  Anyone know where I can get a new screen for my Toshiba Satellite S2540-101 hinges. Flip flops on screen at 180 degrees!

  I tried eBay and nobody seems to have any!

  See you soon

  Dave

  Hi Dave

  I can imagine that it can be difficult to find these pieces for this older model laptop. eBay is the right place to search for such parts. You can try to contact the service provider allowed in your country, but I'm pretty skeptical, they will be able to order these parts.

  But I think they can help you and give you the exact order number. Using this issue maybe you will be lucky and find this Googling pieces around.

• Satellite 2450 - 101 broken hinge - necessary disassembly guide

  Hi did anyone know where I can get hold of a guide to disassembly to replace my broken hinge? I have the part, but want to make sure I have disassemble it properly. Any help gratefully received.

  Hello

  I would recommend not also remove and open Notepad by yourself if you do not have enough experience. It may be damaged parts instead of fix ;)

  Each laptop technician could make this work for a few dollars. so ask someone in your area.

  By the way; I found an interesting site how to replace Satellite 2435 LCD screen. This laptop is similar to the Sat 2450.

  It is perhaps useful to s:
  Replacing screen on Satellite 2435

• Satellite 2450 - the recovery disk contains the same OS?

  I have a Toshiba 2450 (Yes old enough) and I want to reformat the HARD drive and install Windows XP.

  Now, my question is I can do with the product recovery CD, and if I reformat with him it will be the same operating system as before (Windows XP home edition) with all the required drivers for Toshiba or some other OS? :)

  Hello!

  If you don't have your laptop with Windows XP Home Edition recovery disk contains the operating system.

  The recovery disc to factory settings. This means that the operating system that came with the laptop.

  Good bye

• Equium A200 - how to remove the display?

  Hello.

  I need to remove the screen on my Equium A200 but there seems to be no screws to enter.
  None of the guides I found works for this model.

  No one knows how to do?

  Thank you
  Dan

  Hello

  Disassembly of the laptop is not really easy it s really complicated.
  If you have no experience so you should not do this, you may damage other parts

  But as far as I know to remove the keyboard and the top cover Assembly.
  Then you can remove the four screws under the rubber covers. This allows you to remove the LCD screen bezel.
  New measures, you will need to remove the screws from the display hinges.

  As I mentioned above; It's not so easy and be careful if you would remove anything

• On the Satellite 2450-201 NVIDIA display driver

  I downloaded and installed the latest nvidia display driver for my laptop that has nvidia gforce 420 GB and I have install the driver was the 36,48 v when I start to the top of the poster are bad and we = hen I connect it says Error loading nview no nvidia hardware not detected on the primary monitor if you are running on nvidia card please make sure that it is configured to be primary. What should I do when I have the access control panel nevidia Office Manger and check the box that the message happens again then I restart and the graphics are fine, but after about 5 boot up it goes back to the graphocs rubish and message appears again.
  what I'll do!

  Hello

  Have you installed the driver for the Toshiba page?
  If so visit the Toshiba driver page and download the driver.
  It s not recommended to use NOT Toshiba graphics cards drivers.

  Then I recommend to check the display properties, if the screen of the laptop has been on the primary monitor. Mark the display with the digit 1 and check the option use this device as the primary monitor has been activated.

  Also, check in the Advanced tab nView option if the nView mode has been upgraded and that make the main display has been enabled for the screen of the laptop.

• Satellite Pro M10: Display of the strange problem

  I have a M10 Pro of the Satellite with 14 inch display is 6 weeks out of warranty.

  The other day, I got cold room and the display went funny - odd pixels, green and black with small points which then becomes more clear screen so that the entire screen is a mixture of points fluorescent which becomes white and then things come back.

  Then, the cycle repeats itself after a few seconds.

  I perform a restart and everything's going well for a while, and then it restarts. I move the laptop in a cold room and it's ok again. I can't understand that the issue occurs on Windows XP and SUSE 9.0 (although it just hangs). I have run SpyBot, have the latest virus checkers, the update of Windows (SP2) and NVidia drivers.

  Any ideas?

  Seemed to have solved the problem by dismantling the machine, could not do not get all the way and completely remove the top from the bottom as there seems to be a hidden screw. Everything is fine now, could have been the fact that some of the screws were loose.

  Also had a full SpyBot and Virus Check.

  I also had to re - save under a different name, since it is "Specific country" even if I thought that I had, I now have three profiles - two I created recently, and one I could not remember the username for, would be really better if password request tells you the user name to an e-mail address it is registered. It's really hard to keep track of them so I have a lot of connections as a computer scientist. Really really annoying and stupid system.

• How to replace the hard drive internal on Satellite 2450?

  Hello!
  Last month, after a BSOD displayed (I don't have the code of error message, unfortunately) my laptop decided to not work again.
  At the start, he reached the start menu and then displays a black screen... no message, no auto restart... nothing. Just a weird noise coming from the hard drive (like a scratched cd).

  I tried to format the drive, but without success. After choosing the boot source, trying to read the cd and the black screen appears again, with no message. I checked if the Bay of cd is not working properly and it is. (I think)
  So I replaced the HDD in my satellite 2450. A new toshiba ide 2.5 30 GB hard drive. But when I install a new one, the system does not recognize.

  The control panel of the Bios says that "no hard disk" is available, and I can not change this option. (locked)
  With the Windows Xp cd in the drive, the Setup program runs all properly until the 'select drive' format menu, witch says that no hard drive is recognized (with a new drive hard in).

  I don't really know what to do!
  Is something missing in this process?

  Thank you for the patience

  Hello

  The laptop did not recognize a new HARD drive. Which is one reason why Win XP cannot follow the additional installation steps

  I can't say exactly why the HARD drive is not recognized, but the 30 GB IDE should be ok.
  I remember one of my friends had a similar problem with the new HARD drive.
  Some hard drives have a jumper (3.5 HARD drive and 2.5 IDE HARD drive too)
  Maybe you should check if a rider has been set to the right position (slave?).

  Check it otherwise that I recommend to test with another new HARD drive

  In the worst case the disc HARD controller might be faulty, but it would mean replacing a motherboard

• Need new hinges to Satellite 2450-201

  The hinges on my * Satellite 2450-201 * are turned away.
  Are the hinges on the - 101 previous model the same i.e. P000368300 and P000368310 and if so, are still available. If not, can anyone advise please.
  Any info gratefully received.

  Hello

  I think you should get in touch with a local ASP (partner).
  The ASP can help you order the right parts.

  Because this laptop is an oldie, I doubt that you get these pieces from an online retailer
  However, google may provide you with some offers if you are looking for unique part numbers

  In any case, all the possible parts could be ordered in service partner as I said above, for me, it looks like an easier way to get these parts.