Satellite 3000 touchpad problem

Similar Questions

• Satellite C660 - touchpad problems

  Hello

  I have problems with the touchpad on my Satellite C660. I have only had it for about 2 & 1/2 months, and the problem seems to be worse.

  I tried to check for drivers, changing the settings of the touchpad, but nothing helped.
  The main problem is that when you move your finger on the pad, the cursor will not move, however it also scrolls the page more or less important size.

  I'm quite frustrated because it is essentially a new machine.

  Everyone has ideas, or should I try to get replaced by a new one.

  Thank you

  James

  Looks like you're triggering gestures. For example, if you press the right side of the touchpad, it will allow the scroll bar.

  You can disable these features in the advanced Touchpad settings.

• Satellite A200 - TouchPad problem

  Hello
  I installed windows 7 on my satellite A200 - 1 M 6 and touchpad does not work. I have installed synaptic drivers and the Alps, but it did not work. In the Device Manager in "mice and other pointing devices", I HID-compliant mouse and mouse Compatible PS/2. There is no device as a touchpad. I have no problem with this in Windows XP and Vista.

  Post edited by: walderro

  Hello

  As I see it, there is no available by Satellite A200 - 1 M 6. (PSAE0E) Touchpad driver for Windows 7 on the toshiba driver page.

• Satellite C650 - Touchpad problem

  Toshiba Satellite C650 - 13G PSC08E I found that the touchpad, wasn't work and left click did not work, tried all the fixes on the forum.

  Check the BIOS and update
  Function key, fine activated

  That all controlled parameters appear in order, so I assumed a defective left click button.
  I bought the new palmrest with touchpad and after exactly the same problem.

  I can get it to work as a left-handed mouse, right button works as the left should, all other functions are fine except not left click.

  Surely, I couldn't be pretty unlucky to have bought a palmrest with broken so left click button (it's new)

  Any help would be appreciated

  What I will say maybe you were simply no chance and you had installed another faulty touchpad module, but to be honest, it will be very strange

  In my case, the control panel? mouse? last tab (Setup button) contain additional options to control the touchpad features.

  My laptop uses the touchpad Alps and the Alps touchpad utility is installed.
  This tool provides additional parameters for touchpad left and right, click.
  I did not change these options, but of course it of possible to disable the left and right click in this area.

• Former Satellite 3000-514 - problems opening/energy

  Hey there!

  Thank you for the opportunity to get a first support! :)

  I have an old laptop here, S3000-514, equipped with a pentium III, he looks a bit like the Satellite 1200.
  I tried to disasseble it with this guide for the 1200 to clean in the first place:
  http://www.irisvista.com/tech/laptops/Toshiba-Satellite-1200/take-apart-laptop-1.htm

  (1) * solved *.

  I can't yet find an online manual for this laptop. (which I don't really now no need)

  (2) the second problem I have is that, as I have read others have as well, when I start the book with the battery, it still empty battery and turn off then.
  When you remove the battery, can I start the book with the "!"-button. It does not work with the normal power button. But the book then randomly turns off after 20 seconds to 5 minutes.

  I appreciate any input!
  Thanks in advance.

  Greetings

  Hello

  With regard to the first question about the manual;
  If you are looking for the user manual, you can download it from the homepage of the Toshiba support. But you won't find that everything disassemble manual on the Toshiba page because these documents are not for public use!

  With regard to the question on the battery.
  If I understand your message, you have some problems with the battery charging.
  I put t know how old you battery is, but the fact is that after a long period of time the battery will lose performance, and finally it must be replaced.

  My battery is about 5 years old and I can use it only for about 30 sec - 1 min. While the battery is empty and the laptop stops

  I hope this helps a little

• Satellite A100 - Touchpad problem

  Hello

  Can anyone help?
  I have just brought an A100 and downloaded all the updates for my machine (with the exception of ME7).

  Since the updates, the mouse is eratically work, particuarly over the touchpad, my USB mouse works well. I changed the settings, I downloaded the latest version from the web site of Toshiba, I uninstalled and reloaded the software and the touchpad still does not work properly.

  Every so often the USB mouse wants to go to a different point on the screen without human intervention!

  I checked the IRQ, and there is no conflict of interest.

  I am running XP Media Center

  Any suggestions?

  Hello

  Maybe that sounds a little weird, but have you tried to reinstall your windows? I know, it's very annoying to reinstall an OS, but you said after the installation of your updates of your mouse/touchpad started acting like you described. With the reinstall (recovery), you can specify if your problem is just associated software.

  Greetings

• Satellite P300-1 year - Touchpad problem with AC adapter / CC

  I have a laptop Satellite P300-1 year and from the beginning (two weeks)
  I have a touchpad problem: it will not immediately responsive and the pointer shakes when pressing the key. Very often, it freezes for only one or two seconds.

  It's VERY annoying. A USB mouse works perfectly.
  I tried to reinstall the drivers of the ALPS, tried Synaptics ones, just try Windows Vista drivers: no way.

  Now, I found the reason: this question is present only when the laptop is powered by the AC adapter / CC.
  With the battery, the touchpad is perfect.

  I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore!
  Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  Anyone had this same problem?

  > I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore! Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  The point is that your laptop should be always verified using the Toshiba factory setting.
  Why? Because the ASP wants to make sure that this issue is not related to a software problem (compatibility problems with applications 3rd part). Software problems are not covered by the warranty.

  In addition the ASP will always recover the laptop before the verification of the pieces of equipment to malfunction. Therefore, you should always back up your data from the HARD disk until you send the laptop to check.

  I recommend you to reinstall the operating system using the Toshiba recover disc and then check if the problem appears.
  If yes you can contact ASP and could provide all the necessary details for only one technician.

  Good bye

• Weird problem of satellite 3000

  I have 2 laptops Toshiba Satellite, both for professional use,
  the 3000, however, my pride and joy. I work in a very exposed position and people actually stop and ask myself... What is the brand of this laptop? Recently, I've updated
  for XP Pro the 384 MB of Ram. However, the machine was still faster.
  Until last night, at home, I wanted to work. I have
  could not start windows. Finally a Dos window pops up saying "not properly connected IDE cable", as well as a series of short beeps. I took the laptop first thing this morning, tonight, what I was told that the IDE controller jumped because of a power surge, and I so need a new motherboard. Is it possible? I'm afraid that they spoil this machine. This laptop is much faster than Compaq P4 my husband.

  HI Muzikatz,

  I also have a Satellite 3000 and it works correctly. I love the Sat 3000 because it's a well designed laptop which is with its integrated components very fast and strong. In our society we have about 10 Sam 3000 in use and we havn't a hardware bug again. In my opinion your IDE cable maybe loose by a blow or something else. Another problem might be that your RAM upgrade it damaged.

  In my mind there is no other explanation for this problem. Maybe you could visit a Toshiba service partner to solve the problem. On the following site, you can find under Support / downloads - homepage to support a request for Toshiba Service partner
  http://EU.computers.Toshiba-Europe.com

  Bossi Bye

• Line problem vertical screen satellite 3000

  my laptop is Satellite 3000, it had vertical line problem now, I want to use an outdoor screen tube to replace the current damaged LED screen.

  I tried to use the swap FN + F5 key, but it's still doesn't work, I tried to log into the system to check, ((windows xp) system is normal), but I don't see anything because the screen is black, it will not be in the system even if I have in connected to the local network, because the configuration of mobile network function is forbidden to communicate with the internet , (I ghost before it has completely damaged), the question is:

  1, I have to configure something so she may use it outside the screen in windows XP? or just use the FN + F5 swap button?

  2, how am I going to do next step if I want to use the external screen?

  thx a lot

  Hello

  the first question you should ask is, if the machine works really well. This means that all THE drivers are installed and so on.
  The other thing is:
  When you connect the external monitor to your computer, you see something while turning on the machine? (Logo of Toshiba, Windows XP start screen, etc.).
  Usually, you should be able to work on an external display, and if all drivers and tools (such as FN + F5-> change device display tool) are installed, then the "display" button should be possible.

  Please answer and describe if you see something that we can do some better troubleshooting.

  Welcome them

• Satellite A660 - 07P problem with the pointer of the mouse using the touchpad

  I just bought my A660 07P last Thursday, September 15, 10 and I noticed that I had problems with the mouse pointer using the touchpad.

  From time to time, the cursor/pointer is locked and seems something like a button up and down.
  I assume it's because it's on a mode of waiting, but in this case as every 5 minutes.
  When it is locked, it will also change the zoom percentage when the touchpad is struck. It is very not when I'm in the middle of something and I can not move the pointer. In addition, the start is very slow.

  BTW, I have not installed any programs or applications. I'm still testing until Friday, otherwise I'll go back to where I bought it.

  Hi mate

  This isn't touchpad problem.
  I guess as support for computer laptop MULTI-TOUCH PAD
  There are a few additional features supported by touchpad, and I think that you have enabled this while using the touchpad

  The touchpad supports the features:
  _ChiralMotion_
  You can scroll vertically and horizontally

  _Pinch Zoom_
  This feature provides functionality like the scroll wheel zooming

  _Rotating (chiral spin) _
  This provides gestures to rotate the photos and other objects

  _Momentum_
  This feature provides a smooth, fast trackball as the movement of the mouse. A quick finger on the touchpad surface can move the sliders in the entire screen.

• Battery won't charge on my Satellite 3000 - x 4

  Hello

  I have a Satellite 3000 - x 4 which does not seem to charge the battery. Have tried new ones, but they do not recharge, defiler light flashes but does not load.
  All of the suggestions.

  Hi keith267,
  I also have a sat3000! What cpu you have in it?

  There are 2 reasons for this problem:
  a cheap and an expensive... lets see what we can do!

  -Make sure that your adapter is good
  for this purpose operate the machine without battery!
  Flashing LED or is it constantly on? When flashing you you have a problem...
  on? good!
  does not start or stops:-AC adapter has gone... made a cheap (app.40a? ¬)

  -operate your machine with battery only
  Ok? good!
  does not work or stops immediately: training of battery is recommended
  for this purpose start a dos without mains system and let it run "to dry".
  After that try to reload with alternating current, do this 5 times to train your battery
  OK afterwards? good!
  None? It is the bitter pill to take

  -Insert the battery and connect the ac power
  When your machine Boote und runs, half the work is done
  the light continues to blink? Yes? you need a new powermodule for your machine...
  That's the bad thing: it is on the motherboard and can not be changed wothout change the motherboard...

  If you have no luck with this procedure you can have mine instead ;-)

• Dismantling of Satellite 3000 - X 4

  Hello!

  My 3 year old Satellite 3000 - X 4 recently died on me (is not even complete the initial BIOS messages) and I would like to be able to dig into it but I can't seem to get the case out despite the withdrawal of all the screws! It seems to be "stuck" in the Middle, is there a hidden screw? Someone knows how to disassemble this laptop or where to find patterns of disassmbly such as another computer laptop producers provide on their Web sites.

  Thank you

  Matt

  [Edited by: admin]

  Hi Matt

  As much as I know there is not any type of maintenance manuals to download. A friend of mine also has Satellite 3000. Maybe it's able to know how to solve this problem. I'll ask him.

  It is also possible that there is a screw placed somewhere on another side.

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A300 - touchpad & keyboard issues

  I have the same problem that a lot of people is faced with (PSAG8E - 05J00TEN Toshiba Satellite A300 - 21H). I'm sure that the touchpad is not disabled.
  Clean installation of Windows VISTA - touchpad & keyboard half the time not work half the time. I'm sure this isn't a driver problem (if it doesn't not Device Manager said was a problem with the device..). I already tried 5 different drivers...
  I am faced with the question since I bought it... I thought that there could be problem with OS, today I installed UBANTU but face question (Mouse pad stops after some time) with this OS too... I'm sure that its hardware problem not with OS or any driver...

  Please can someone is there any solution for this...

  I have Satellite A300-1LI and it is also PASG8E but I n t notice a keyboard or touchpad problem. At the beginning I used it with the original image of Vista, but about a year now, I use Windows XP Home edition and Win7 as dual-boot. No problem at all.

  If you have noticed this strange problem from day one, why you didn t contacted Toshiba service and asked for help?
  I can imagine there is a hardware problem but I put t know what you want to do all alone on this subject. want to trade you the keyboard or the touchpad only.

  Replacement of keyboard is not a big problem but the touchpad...

• Satellite 3000-400-Accupoint does not work after installing Windows XP

  Hello

  I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.

  Sorry for my bad English.

  Hello

  Do you mean that you can not use the touchpad buttons too?
  Hmm, sounds a little like hardware delivers what do you think?

  Have you tried to install a driver for touchpad?
  I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)

  Try to install this driver and check if it helps.