Satellite 320CDT: what slim burner could be compatible?

Similar Questions

• What card WiFi could be compatible with Satellite Pro 2100 PS210E

  I have an old Satellite Pro 2100 PS210E-005ES-FR part number and trying to locate a Wifi card to fit.

  If someone can advise on such a map, can you?

  Hmm, the satellite Pro 2100 seems to bear the USB 1.1.
  There could be a slow data transmission using a USB WiFi key. So I advise to use a wireless network card internal minPCI as suggested above.

  I discovered that this Kit (PA3212U-1MPC) wireless LAN card could also be used too.

• Satellite A50: What CD/DVD readers are compatible?

  Hello

  Since I had my A50 from 2 1/2 years I had intermittent problems with this DVD player. It has finally packed in and I need to replace the drive, so I can use the product recovery CD

  I tried to find my computer's master/slave settings while I'm able to find a correct drive to replace it with.

  Anyone know what the parameters are, or what kind of car I could use to replace it with
  Thank you
  Ollie

  Hello

  Please see the s manuals for Satellite A50 (pages 4-12) and you will find which driver of optical discs are compatible with your laptop.

  If s manuals is not recorded on your device you can find under http://eu.computers.toshiba-europe.com support & downloads Support Downloads home page.

  Good luck!

• Re: Satellite L40 - what is faster - AHCI or compatible?

  Who is the best drive HARD in AHCI or IDE with Intel Matrix Console manager?

  Hello!

  What laptop you have exactly?

  However, I think with native IDE you mean compatibility mode?
  AHCI mode is faster than the compatible mode, but so you need the Intel Storage Manager.

  I hope I could help you.

  Good bye

• Satellite 320CDT: this disc is compatible?

  Hi all
  I know it's old, but I have a Toshiba 320CDT which has a dead CD-ROM drive (unless it is very good)
  The mounted is a TEAC CD-220EA-32 (X 20)
  Can someone tell me if a TEAC 224th P / N 1977047 A-30 fits in replacement. It is 24 X drive.

  Thank you very much

  Shane

  Hello

  You re right, it s really an oldie and, therefore, I put t found much information on this unit.
  You probably know that not every internal drive is compatible because of the road settings.
  There are three possibilities: maser, Salvo and c - salt.
  Unfortunately, but it s I never knew what the parameters of the Satellite 320CDT uses.
  But I think you should check the settings of the TEAC CD-220EA-32 (20 X). Then, you need to know what the next reader must support settings.

  Otherwise, you can contact Toshiba service partner in your country and ask the guys for the compatible reader.

• Update wireless Toshiba Satellite S1900-303: what wi - fi card is compatible?

  Hello

  I have a laptop Toshiba Satellite S1900-303.

  I would like to add a Mini PCI WiFi card, the laptop is capable of wireless, as it was an optional upgrade. The wireless antenna is here and the switch and the PCI slot.

  I tried using a 2200 GB Intel Pro/Set wireless card but may not turn on,
  So I tried a (number PA3458U-1MPC) Atheros wireless card but I can not pass it as well.

  There is no option in the Bios to enable

  I tried Fn - F8 to swith the card wireless on but nothing happens and the wireless light not, but if I turn on the wireless switch, then press Fn - F8 it came as "Wireless has been disabled, please make sure that the wireless switch has been turn on.

  Any suggestions? What could I have been hurt, or did the two cards are incompatible with this laptop?

  If so what Wireless mini Pci card would work?

  Thank you

  Hello

  I found the info that the mini PCI WiFi card part number: PA3212U-1MPC could be compatible.
  There seems to be an Intel Pro 2100 wireless network card that supports the 802. 11b standard Wlan.

  Best regards

• Equium L20-198: what DVD burner are compatible

  Hello.

  The combi CD / DVD writer on my laptop decided to give up the ghost.
  In my view, there is a good choice of burners 'slimline' designed for portable computers out there, but I was warned that not all burners are compatible with all PC.

  Apart from one obvious Mat * like one already installed, someone could you please recommend or advise the slimline burners will be compatible with Toshiba laptops, or better yet my model in general or at least advise what brands are known to be incompatible with computers laptop toshiba.

  I would be extremely grateful for any help you could give. :)

  Thank you very much
  Steve.

  You are right. Not all CD/DVD drive are compatible due to different master/slave/c-salt settings.

  But I ve discovered DVD Super Multi Pinan could be compatible:

  -MATSU * A (UJ-841BTQ-A)
  -HLDS (GSA-4082N. ATAKN0)
  -Pioneer (DVR-K16TBA)
  -TEAC (DV-W28EA)

  You can also order the compatible CD/DVD player with ASP in your country.
  Guys might provide details which readers are correct.

  Good bye

• What CD/DVD drive is compatible with Satellite 1400-103

  Hello

  I've been looking for A replacement Dvd Rom for my Toshiba Satellite 1400-103 and I can't find one.
  Because she was so old so I was wondering if there is some other Dvd Compatible disks that I can buy for my laptop?

  Thank you

  I think this CD/DVD drive could be compatible:

  -Toshiba SD-R2102
  -Matsu * a UJDA720 *.
  -TEAC DW-28TH *.
  -Toshiba SD-C2502 *.
  -TEAC DV-28-B34
  -Hitachi GDR-8081N-ATAB *.

  All readers of this I found in the manual for the Sat 1400-103

  PS: Operating instructions can be downloaded from the Toshiba page too ;)

• Satellite A200-195: what CD/DVD player is compatible?

  Hey guys and girls,

  I had a quick glance and asked Toshiba but no answer given so thought I would ask experts here.
  My DVD-RW in my laptop TS L632D dead and I need a new.

  So what we can buy and adapt without problem.
  These discs are known to have problems with conflict etc... If another player would be better.

  So what you guys and girls indicate they.

  See you soon,.

  Chris

  Hello

  Thank you very much that you see us as an expert :)
  We are all here are users of Toshiba laptops and as you probably don t know this is a user forum. :) so maybe not really ;) experts

  To be honest it s I do not know that this reader of CD/DVD problem.
  Like you probably n t know every CD/DVD drive doesn t takes care of all the s possible CD or DVD from different manufacturers.
  Some CD and DVD is more compatible and some of CD or DVD s are not entirely compatible.

  However, the point is that you need a new CD/DVD drive.
  I checked the manual A200 (can be downloaded from the Toshiba page) and there is a list with some compatible players.
  Check the page for the user 6 and 7

  You can also call the ASP in your country. The guy knows what CD/DVD players are compatible with your laptop!

  Good bye

• Satellite A30 - what wireless network cards are supported?

  Have a computer Satellite A30 laptop-404, I wonder what kind of card Mini-PCI Wireless would be compatible with my PC?

  Found this one for example.

  Gigabyte GN-WI01GS MINI PCI ADAPT 802. 11B / G BASE of RALINK CHIP SNM

  Anyone who knows what other types could be used?

  Hello

  Hmm, well I've never heard of Gigabyte WLAN cards and I don't know laptops that are equipped with these cards.

  I checked Toshiba Web site and some Satellite A30 models shipped with a card Atheros and Intel WLAN. So, I recommend buying a those manufactures wireless network card.
  For example Wireless LAN Mini PCI card (2, 4 GHz, 802 11 b) PA3212U-3MPC should be compatible.

  Good bye

• Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8

  I have a L875 Pro of the Satellite with Blu - ray burner.

  I tried to create the recovery DVD disc, the burn process stopped and error guest asked me to check if the disc is damaged or scratched. After the burning process, the DVD was not empty and some data wrote on this subject.

  I tried to burn the data disc in windows 8. the burner is not started. I'm only able to add files to the disc.

  I play Blu - ray movies and dvd movies, blu ray player was fine.

  I found information on the appropriate corresponding to the burning speed dvd disc speed.

  How do I know what speed the burner support?

  How to burn a DVD or Blu - Ray in windows 8? (I looked on the Microsoft forum, but the solution did not work.)

  It would be great if someone respond and make the drive burn discs.

  As a first step, it will be interesting to see why you cannot create recovery discs.
  Have you used vacuum on DVD-R media? Otherwise please use it and buy a product of high quality like Verbatim or TDK.

  Is there an option to create the USB stick recovery?

  Combustion under Win8? Have you tried to use some burning as NERO applications?

• Satellite A60-106: where to find a compatible CD/DVD player

  Replaced HARD drive has attempted to load the operating system (windows original xp recovery and/or linux mint) both drives recognized and started the linux disc is a cd live and worked but when trying to install hard disk two systems reached about 25% and stopped in the case of the linux a message telling me that the hard drive is faulty It is necessary to clean the cd or the dvd/cd drive is dirty or defective.

  I cleaned them both, checked the integrity of the cd, replaced the hard drive. So don't let the dvd/cd drive.
  Where a replacement? or did someone knows what the problem could be PS

  I am a novice

  Hello

  > Where a replacement?
  A compatible CD/DVD player can be ordered from a local Toshiba ASP.
  Then get in touch with the ASP from Toshiba to get a new compatible CD/DVD player

  Good luck

• I can't play my DVD on my DVD player. I get a message that says: "disk is incompatible." How to burn a DVD compatible with DVD players?

  Original title: DVD burning

  I successfully burned a DVD of a film I made with moviemaker that I can still play on older versions of Windows, but I can't play my DVD on my DVD player.  I get a message that says: "disk is incompatible."  How to burn a DVD compatible with DVD players?

  Hello Angels3cma,

  Thank you for posting.  It seems that you were doing data DVD discs.  To burn DVDs to be compatible with the DVD player, you will need to make DVD-video disc.  I have listed the steps below to make DVD-video disc in Windows DVD Maker.  These same steps are be typing "How to burn a movie on a DVD" in Help and Support found by pressing the button Start/Orb you Windows desktop.

  Burn a DVD-video disc

  You can create DVDs quickly and easily using Windows DVD creation. You can add videos, photos and audio, make slide shows for your DVD, or add your Windows Movie Maker projects. Once you add files, you can burn your DVD with a single click, or, if you prefer, you can choose from several styles of menu and the slide show options to make your special DVD before you burn, or customize your DVD menus and write the DVD menu text yourself.

  After you create a DVD, you can play the DVD on a DVD player and watch your movies and slide shows on TV. The following steps explain how to use creation of Windows DVD to burn a DVD.

  To open Windows DVD Maker

  • Click Start, click all programs, and then click Windows DVD creation.

    Note

    • You can also open Windows DVD Maker by inserting a DVD recordable or rewritable Virgin in your DVD burner. When the AutoPlay dialog appears automatically, click on burn a DVD video disc using Windows DVD creation.

  To add and mix and match the elements on a DVD

  1. On sharing your memories on a DVD page, click Choose photos and videos.

  2. Do one of the following on the Add pictures and video to the DVD page:

     • Click Add items. Find and select the video files, photos, and files in project Windows Movie Maker that you want to add to your DVD, and then click Add.

     • Click file and then click Open project file. Find the folder that contains a project file creation of Windows DVD that you want to use for your DVD, click the project for creating Windows DVD file, and then click Open.

       You can also click Add items to add additional items to the DVD after opening a Windows DVD project file.

  3. To arrange items and specify the order in which the different items will play from the DVD, click on the video, photo or slide show that you want to move, then click on go up or down. You can also move items by dragging upwards or downwards in the list.

  4. To remove an item from the DVD, select the item you want to remove, and then click on remove items.

  Choose a DVD burner and enter a DVD title

  1. If you have more than one DVD burner installed on your computer, on the add pictures and video to the DVD page, select the DVD burner that you want to use from the DVD burner list.

  2. If you want to set different options for your DVD, click Options. For more information about the different options you can specify when burning a DVD, see Change DVD-video settings.

  3. Click the disc title box, and then type a title for the DVD.

  To change the text of a menu for your DVD

  1. Once you have added all of your files and chosen the burner and title, click Next.

  2. To customize the text for the DVD menu, click Menu text, and then do one or more of the following:

  • Click on the police box and then select the font for the text of the menu.

  • Click the font color, bold or italic buttons to select the font color and formatting.

  • In the disc title box, type the title that you want to use for your DVD.

  • In the Play button box, type a label for the button that plays your DVD.

  • In the scenes button box, type a label for the button that displays the different scenes on the DVD.

  • In the area of the button notes, type a label for the button that shows all the notes you enter for the DVD.

  • In the comments box, type any notes that you want to appear on your DVD.

    Notes button and Notes page only appear on the DVD if you include information in these fields.

  • Click on the text to change.

  Tip

  • You can see a static preview of your settings in the preview to the right of the display pane. Alternatively, to see how the menu text will display when you burn your DVD, click Preview.

  To customize the menu for your DVD style

  1. To customize the style of menu for your DVD, click one of the styles of DVD menu along the right side of the screen, or click the Customize menu, and then do one or more of the following:

     • Click on the police box and select a font.

     • Click the font color, bold or italic buttons to select the font color and formatting.

     • If you have chosen a style of menu with the two in the foreground and background video options, near foreground video, click Browse, locate the video that you want to appear in the foreground and then click Open.

     • To have a picture or video appear as background for the main menu of the DVD, near background video, click Browse, locate the video that you want to appear in the background, and then click Open.

     • To add a digital media audio file to play as background music, while the menu for your DVD, near audio menu, click Browse, locate the audio file you want to use, and then click Open.

     • Click the scenes button styles box, and then select the shape of the buttons scenes on your DVD.

     • If you want to see the menu as it will appear when you play your DVD, click Preview.

  2. If you want to save the DVD menu custom settings as a new DVD menu style, click Save as new style. In the name of Style name box, type a name for the custom menu style, and then click OK. You can then choose to use this DVD menu style custom for the current DVD and for other DVDs you create using Windows DVD creation.

  3. If you have not saved the style as a new style, click Change Style to save the changes you made for this DVD and to return to the previous page.

  Choose a slide show on the DVD settings

  1. To set the settings of the picture for the slide show on your DVD, click slide show.

  2. On the change your slide show settings page, do one or more of the following:

     • Click Add music, locate the music files you want to add, and then click Open.

     • Depending on the length and the slide show's settings, you can add additional audio files. To do this, repeat the previous step.

     • If you added more than one audio file and you want to change the order in which the music files play in the slide show, click an audio file that you want to move and then click on move up or move down.

     • To remove an audio file in the list, in the music for slide show list, select the audio file, and then click on remove.

     • To change the length of the slide show automatically so that it corresponds to the duration of the music that you have added, select the Change slide show length to match music length check box.

• To specify the duration for each picture to display in the slide show, select the duration (in seconds) in the length of the picture box.

• To choose the kind of transitions to use between pictures, select a transition type in the Transition area.

• To add effects, Pan and zoom to the pictures you include in your slide show, click on use the Pan and zoom for images effects.

• Click Change slide show to save the changes you made and to go to the previous page.

To burn your DVD

1. When you have finished adding files and customize your DVD menus, click on burn.

2. After the DVD disc burned successfully, you can do one or more of the following operations on your disc is ready page:

   • To make another copy of the current DVD, remove the completed DVD, insert a new recordable DVD, and then click on create another copy of this disc.

   • To finish creating Windows DVD, click Close.

Please let me know if this helps you to Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a problem with the maximum size of the RAM for Satellite 320CDT?

  I have a 320CDT Satellite with the latest BIOS (v8.00) and Windows 98 Second edition installed. There are 32MB memory base and a 32 MB module in the single expansion slot. If I change it to a plug-in 64 MB I see that 64 MB of total memory reported, not 96 as expected; the specification for the machine indicates that the admissible maximum memory is 160 MB (32 MB base + 128MB expansion). Does anyone know if there is a problem with the maximum memory size for this model and if there is a solution or workaround? I need to know quickly, in order to decide if I should return the memory module to the vendor! Thanks a lot for any help, Peter

  Satellite 320CDT supports an internal memory of 32 MB and a single slot can be used!
  You can improve it to max 96 MB (32 + 64 MB)
  I found a few old memory modules. You can use the modules SODIMM 144 pin EDO PA2043U 32 MB or 64 MB PA2044U

  Greetings

• What external optical drives are compatible with the Acer Aspire One with Windows 7 Home Premium 722

  What external optical drives are compatible with the Acer Aspire One 722 with Windows 7 Home Premium OS.  I need to make the backup disks and install the CD software.

  Thank you.

  More external ODD will work just make sure it's an external power source. This allows not to take a lot of power to the unit.