Satellite A - 300 d and general access to records

Similar Questions

• Satellite U 300 - battery and sound problems

  Hi, I was wondering if anyone has had similar problems as me:
  My laptop is only two years, but last year his work only intermittently. I get messages saying that the driver is not installed, until one day he will decide that the driver is installed after all and works very well. Until the next time it stops working. There seems no rhyme or reason for it. I gave up trying to reinstall the driver, because I know that (possibly) the sound will come back without intervention from myself.

  My second problem may be connected - I have problems every now and then close the laptop. I try to put in mode 'sleep', but is not complete the process, and the blue light comes on. When I then open the cover, very often, the screen stays black and I have to turn off the machine and turn it on again the force again.

  Then recently, I noticed a sharp drop in the battery life (less than an hour). He also annoyingly started losing all power and cut until the indicator showed all the usual warnings of low power.

  Anyone know if these problems can be linked, and whether they can be fixed? A new battery will fix it? To be honest, he arrived at a point where I think to buy another laptop do since they are really starting to get frustrating!

  Thank you very much

  Gooday,

  I also own a U300 I bought about 2 years ago now, I had no problem with the sound but didn't have any other problems with my 1-2 months battery life after life - 20-30 min. I just baught a new battery and it is promising, I just did the first load and it lasted long, however the windows said it had 0% remaining, but I pulled out another 30-45 minutes the dough until it went flat. If you look in your event log do you get the message

  ": The embedded controller (EC) has failed in the specified time-out." This may indicate that there is an error in the EC hardware or firmware or BIOS is accessing the EC incorrectly. You should check with the manufacturer of your computer for an updated BIOS. In some cases, this error may cause the computer to function properly. »

  It is listed under ACPI in the event log.

  see you soon

  Lee.

• Satellite A300/300 d frozen, can't do anything

  I'm on a Toshiba Satellite A300/300 d and just used a DVD burner external for the first time with the laptop, everything was beautiful disc burned successfully but when I took off the drive and went too open internet page the laptop I couldn't do anything.
  Keys power button, mouse pads on nothing happens. Everything froze.

  Help, please!
  Can't even turn it off.

  Just press start button / stop and keep it pressed for a few seconds. This will force the cell to stop.
  Press it again, and then start the laptop. I hope that you can use again.

  Method described by vmanto will not end with the loss of everything on the HARD drive. It has nothing to do with the data saved on the HARD drive, but you will lose all data stored in RAM at the moment.

• Satellite Pro 300 PSAJ1E - low volume

  Hello.

  I have a Satellite Pro 300 PSAJ1E at work, the sound is very low when played from the computer laptop speakers and also when the headset is connected.

  I have the latest audio driver and volume controls all are turned towards the top (Yes, even the small wheel in front!).

  Any help appreciated.

  Thank you

  Hi ericw400,

  What player you use to listen to music or watch videos? I advise to use the freeware media player VLC Player that can play almost all audio and video files for other players are no longer needed. Just Google a bit to find this tool.

  In VLC media player, you can also change the volume so I recommend this test tool.

• Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.

  Hello

  I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.

  I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

  I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
  What I do, he turns to blue screen with the same information.
  Tried to reinstall from the CD of restoration without success.

  Help would be massively appreciated.
  Saad

  Hello

  > Tried to reinstall from the recovery without success CD.
  In this case, it seems hardware problem.
  BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.

  But this could be one of the possible malfunctions

• Satellite 1700-300: Win ME - invalid system disk - ERROR F3D failed

  Hello

  I have a Toshiba Satellite 1700-300 on windows Millennium Edition. Haven't used for a few years, but when I'm past it the other day the screen says: invalid system disk. I put in my laptop recovery disk, but he cut in halfway through with the message: ERROR F3D failed.

  Not really sure what I'm doing and really can't afford a new!

  Help would be thank you very much!

  Nice discussion on this error, you can find on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1255

  To be honest, I also think that there is a problem with the HARD drive.

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Satellite M40-300: is it possible to make a CD or a DVD for all facilities?

  Hello

  I bought a Satellite M40-300, it's a very good laptop
  I just have two questions:
  is it possible to make a CD or DVD for all facilities
  because I have two partitions. One for the window
  and the other for a linux?

  For Linux I want to install Red Hat Fedora Core 4 all devices are compatible or not? and where I can get driver for this?

  Thank you very much

  PS: Sorry for my English I'm French.

  Hello

  First of all there is no drivers for Linux because Toshiba doesn t supports the Linux operating system. All Toshiba units are shipped with the Microsoft Windows operating system.
  I also work with Linux, but I use a different distribution. I use Knoppix because I n t need to install anything whatsoever on the HARD drive and I can use this Linux as other Linux distributions.

  On a CD/DVD creation: do you know that Symantec Ghost?
  This tool allows to create an image file or a CD/DVD image you OS. I don't know if it works with Linux, but as I suggested, you can use a Knoppix ;) m

  Hoppe these tips will help you make a decision.

  Good bye

• Movie Maker fails with general access denied error

  Windows Movie Maker 6 in Windows Vista SP2 32 bit produces a general access denied error and does not run when an attempt is made to run by normal methods. Right click on the shortcut or icon and choosing "Run as Administrator" results in the successful launch of the program.

  I went to the properties of Moviemk.exe and given full control permissions to the single user and also to the administrator, but the file still does not start by double-clicking.

  Does anyone have a solution for this?

  Thank you

  Ron Carruthers

  Hello Ron_C,

  In Windows Vista and Windows 7, the number of items must be run in administrative mode. Even logged on as administrator, you are running as a standard user.

  The Movie Maker 2.6 installer must be run with administrator privileges.

  1. Select the language
  2. click on the download button.
  3. click on "Run" to start the installation.

  I hope this helps.
  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows movie maker 2.6 General access denied error

  OK, I downloaded Director windows 2.6 for my computer windows vista... I did everything I could to fix the software and restarting the computer... How do I get windows 2.6 Director work? I.e. when I click on the shortcut on my desktop, that is to say the general access denied error... what should I do?

  Hello mercercountyairsoftarmy,

  After uninstalling Movie Maker 2.6, try the following.

  Check to see if there are any corrupt system files.
  Click Start
  Open an elevated command prompt.

  To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  At the command prompt, type the following command and press ENTER:

  SFC/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Then restart your system.

  Pease refer to (KB) knowledge base article if you find corrupted files:
  Article 929833 - how to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files

  Then, go to the file setup.exe and select run as administrator.

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I bought the creative cloud for students and cannot access the document cloud.

  Hello.  I bought the creative cloud for students and cannot access the document cloud.  I thought that it was part of the overall agreement, but it just says my trial has expired and does not allow me to do something.  My payments were made.  The only reason why I

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• SUN grant writing back and allows access to the GL

  Hello
  
  SUN grant writing back and allows access to the GL
  
  Sravan

  If ODI can do it then you can assume generally that SUN will not.
  It seems that everyone forgets to press the useful buttons, correct these days.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• Preference system, security and confidentiality, accessibility - not working/empty

  Hello

  All of a sudden my system preference, safety and confidentiality, accessibility access list does not work, it is completely empty/Virgin and I can't use + / either. They do nothing. The + tries to add an app and I can select an app via the dialog box, but the window just shows blank after choosing an app. He never adds anything.

  I reboot several times and turned to cycling as nothing will do. I also zapped the PRAM, still nothing. I also used the Onyx to repair permissions and also checked the disk, everything going perfectly.

  The list never used to be empty, there are several apps listed in there, but they are all gone now. It is completely empty.

  I have problems because the apps that were once, now on the list will not work until I have added to the list, but I can't. I would like to buy yet another application that could control this list, but I don't know of any application that does.

  I hope someone has a solution or an idea of what to do because you have lived the same exact situation.

  I am running 10.11.5

  Thank you

  -Doren

  

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite L500 - 1 7 and Windows 8.1

  Hello
  I can't install Windows 8.1 (Windows 8 will run successfully). Is - this 'by design' (maybe lack of support for things like EAP, NX or SSE2. see http://windows.microsoft.com/en-US/w...is-pae-nx-sse2).

  Thanks for help

  Frank

  If win 8 runs correctly on your laptop, then it should be possible to switch the Win 8 to 8.1 Windows too...

  In order to get the Win 8.1, install all updates to Win 8 and then access the Bank of Windows to get the update 8.1 Win.

  It should be possible to install the 8.1 update Win Win 8 is already up to date.