Satellite A-L50-1CU - loading of dam.sys problems and nvinitx.dll

Similar Questions

• Satellite A-L50-1CU - no separate for the headset and speaker volume sliders

  Why there is no possibility to control the volume of the headphones separately? I risk my ears (seriously) every time I use headphones, due to the low efficiency of the speakers...

  Any suggestion?

  To be honest I do not understand your problem. You can control the volume level using the F9 and F10 keys or Windows volume mixer.

  Reduce the volume level before you connect headphones and speakers and I hope that there will be no risk to your ears. ;)

• Satellite A-L50-1CU PSKK6E - impossible to update BIOS

  Recently bought a Satellite L50-A-1CU. tried to update the BIOS with the version downloaded from the Toshiba site BIOS_V190_WIN.

  What happens is that I get a small windows saying "C:\". » ???
  Seven polling points are part of the message. By pressing the OK button on the closed window and nothing else happens. Tried to download it again several times, but with the same results...

  I'm doing something wrong? How can I update the BIOS on my laptop?

  Thank you

  Post edited by: ermeneuta

  The laptop has been preloaded with Win 8.1 System.

  Have you changed anything in the configuration of the system?
  Did you remove any Toshiba Software in the past?

  Please check twice if the driver of Toshiba (to Win 8.1) system has been installed correctly!

  If you have changed the system that is to say to Win 7, be sure to what Toshiba has added economic package for WIn 7 is installed!

  It is very important, because both applications from Toshiba are essential to perform the update of the BIOS Toshiba

• Satellite A-L50-1CU-cpu/gpu issues

  Hello everyone,

  On my Satellite I have frequently igdkmd64.sys BSOD (Display driver stopped responding and has corrected). I know that the message, designated drivers intel, so at first I thought that I had to update them, but the rest of the problem.

  Now, after a few months, I got notice that the problem appears only when my laptop is plugged ac.
  When I am running on battery everything works fine.
  The difference between the power and the battery is the mode of intel, in fact if I change the bios setting 'Frequency CPU' dynamic 'Dynamic' to 'Always low' I can run my laptop on the current without any problem.

  I found a similar problem on some old toshiba laptops (https://forum.toshiba.eu/showthread...starts-anytime). In their case, it was a problem with the hardware with the NEC/CATHERINE capacitor.

  So ultimately, I would like to know how to solve my problem cause I want to use all my 3.4 GHz processor.

  Thanks (sorry for my bad English)

  Hello

  I wonder what graphics driver Intel did you use for the update?
  Have you tried the driver posted on the Intel website?

  The processor supports the Intel HD Graphics 4600 and you can get the latest driver 15.36.21.64.4222 of page Intel
  https://Downloadcenter.Intel.com/Dow...7-8-8-1-64-bit

  Here, you choose the win64_153621.zip (ZIP package)
  This allows you to install the driver for the device would allow Manager using the "Advanced" installation procedure You will need the driver folder "unpacked" and the system would automatically take the drivers

• Satellite A-L50-1CU-BT cannot find other BT devices

  Hello

  Today, after months, it was the first time I tried to use bt to transfer files to a mobile phone: bt is active on the l50 and two different mobile phones (android and they are visible and can connect and transfer files an eachother).
  But the L50 is discovery of devices in a loop "without end", without knowing the phones... and the phones are not the L50.

  Filter packets Atheros bt is the last (and only) of toshiba.
  Any idea?

  Thank you
  Marco

  Are you sure that BT has been activated correctly?
  Please check in:
  Charm bar (win key + c) parameters change pc settings pc and devices Bluetooth BT/OFF switch

  Before you do activate the option of BT in the settings of your device (smartphone).
  Note: the use of Android smartphone, you must check the option that makes the smartphone visible to other devices.

  In which case it won't work, I recommend to uninstall the Atheros BT filter driver package, then restart the system and install this package once more.
  Please ensure that raw mode isn't enabled!

• Satellite A-L50-1CU - need info on the resolution of the external display

  Hello world

  It seems an obvious questions, but... could you please tell me exactly the maximum resolution and Hz for the external monitor plugs on this model?
  I need to buy a hi res ips monitor for the edition of photography, and I don't want to pay a lot for something useless...
  Thank you very much
  Marco

  BTW, in the standard memory configuration, can I free memory locations? Or I need to remove the standard memory, substituting it with 2x8GB?

  I don't have this model of laptop, but if it has video HDMI port means that your laptop can offer excellent output video in HD quality.
  In my opinion, you should speak with your local dealer and explain the situation so I hope it can help you choose the best monitor for you. I can also imagine you can take your laptop with you and test it before you buy it.

  According to specification for portable computer, your computer can be upgraded up to 32 GB (4 memory locations).
  To upgrade RAM, you can use the memory modules to follow:
  2GB DDR3L - 1600 - PA5104U-1M2G
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

• Satellite P L50-B-1 1 - WLAN connection problem

  Hi all

  I have an annoying problem that persists with my wifi adapter, after about 20 minutes using my wifi adapter will drop connection and windows will identify a problem with him which will be normally corrected by running the option "solve problems". The windows hotfix identifies is "reset the adapter.

  On occasion if the convenience store will plant which then in turn turns off the wifi card who then cannot be turned on again until the phone has been restarted, but in turn the laptop freezes then trying to stop and I can only turn off by holding the power button.

  Device Manager is not any issues even when the connection dropped and maintains that the device works properly.

  If someone could help me to fix this problem, I would be extremely grateful.

  Thank you

  Hello

  Before we begin to discuss your WLAN problem, check it please this Microsoft article on the wireless network connection and a poor performance.

• Satellite Pro L50 - load capacity of low battery

  Satellite Pro L50, I got a warning box will appear from the Toshiba PC Health Monitor, who said

  "Your battery charge ability is relatively poor.
  After a period of time, the battery will lose its ability to perform in the max capacity & will need to be replaced. This is normal for the batteries. Click the help button for more information on the State of charge 'poor'. »

  By clicking on the help button, said the State of the battery to a third load capacity.

  Is this an indication that I need a new battery?
  The laptop is only 4 months old & I have a few concerns. Comments appreciated

  Best regards, mrpringle.

  If the laptop is 4 months old I recommend you to contact your dealer or directly the closest Toshiba sevice provider and explain the situation.

  You should clarify this with them and maybe you will get new battery free.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
  Don't wait. Call the Toshiba service as soon as possible.

• Satellite L50-A-19N: SYSTEM_SERVICE_EXCEPTION (igdkmd64.sys)

  Greetings, on portable Satellite L50-A-19N (GT 740 M + i HD 4600), I get this BSOD more often than occasional crash (~ ~ once a day).
  Driver name, I guess it's GPU problem (or GPU driver software).

  After installing the latest graphics graphic drivers dedicated, and integrated Intel HD Graphics 15.36.21.64.4222, Geforce 353.06 WHQL, this problem persists for about a year, however in the last few weeks in high intensity.

  Mobile home is connected only to external LCD for output (via original HDMI 1. 4A, audio HDMI cable activated, resolution 2560x1440@60Hz). Also, using the official monitor of the manufacturer driver (it's just INF file).

  I don't know if it's a software driver or card/GPU mother/HW failure problem. Eventually can be caused by bad HDMI Cable or display panel (?).

  I have clues to find the source of the problem and take the next steps to remove the problem, thanks in advance for any relevant info.

  Hello, I think I have the same problem.
  In my case, the problem goes away when I run out of battery. Try also chain the parameter of dynamic frequency Cpu bios of low dynamic forever.

• Satellite Pro L50-B05D - need driver for Windows 7 WLan

  Hello

  I bought a * Toshiba Satellite Pro model L50-B05D psktaa - 001 05d *.
  I needed a new machine because I was starting a new job the next day.

  During an installation out of office 2013 the machine in one of its discounts to zero was a catastrophic error... and has refused any attempt of recovery. around 7:00 in the night...

  I needed an operational machine for work... the next day

  I took out my Windows 7 and proceeded to reconfigure the computer and install Windows 7... Machine is operational, BUT I can't get the Wireless LAN works... for the model I there doesn't seem to be a wireless lan driver...

  The functions of network card BUT not wireless LAN...

  Please can someone tell what is the right driver LAN wireless to the machine...

  Thank you

  Harpoon2222

  Hello

  Your laptop satellite L50-B05D belongs to the PSKTAA series and this series was only released in Australia.

  But the similar series of portable Satellite L50 - B PSKTAE is released in Europe.
  The drivers of the EU Toshiba driver page should be compatible.

  Visit this page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose here.
  Laptop
  Satellite
  Satellite L
  L50 - B satellite
  PSKTAE
  Win 7 64 bit

  Note: there are three different Wlan drivers: Intel, Broadcom, Atheros

• USB 3.0 does not work on my Satellite Pro L50

  Hello boffins.

  I have a problem with the driver for the Intel USB 3.0 eXtensible host controller on my L50 (running Win7 64 bit).

  I recently took my L50 Pro Satelite (PSKK3A-001001) to the repair shop because the blue ports were not running at speeds of USB 3.0 when I plugged a USB 3.0 compatible device (a WD 1 TB HARD drive). When I looked in the device tab "Display connection" Manager, HARD drive showed as connected to the ordinary C220 USB hub which is for USB.2.0. USB 3.0 eXtensible Host Controller has been inactive.

  The technician in the repair shop said:

  + I tested your machine with a new installation of Windows 8 and have been able to achieve speeds to 180 MB/s of my FlashDrive USB 3.0 without problem, which indicates that it is a matter of faulty software. We can improve your Windows 8 machine free of charge if you prefer, but I'm unable to solve the problem in Windows 7. From what I can tell, and what you have experienced, no published 3.0 for Windows 7 USB drivers can recognize the 3 USB ports installed as a USB 3 connection. If you are wanting to stick with Windows 7, I can't guarantee that you will reach speeds of USB 3.0 by using these ports. +

  It's not really good enough, Toshiba. Now, I bought this machine specifically with pre-installed Win7 (because Win8 is rubbish) that I wanted a machine Win7, including USB 3.0 ports. This machine has been published as such, having Win7 installed with 2 x USB 3.0 ports and 1 x USB 2.0. This is confirmed by the page of the specifications of Toshiba here: [http://www.mytoshiba.co.nz/support/computers/satellite/pro/l50/pskk3a-001001/specifications].

  So, my question is this: why this machine is the drivers needed to run it as advertised (i.e. under Win7 with 2 ports USB 3.0 x and 1 x USB 2.0) and if there are drivers for this device available, where are they? I tried and tried the repairman (I guess) but I'm still without a driver to run my USB 3.0 clocked ports. I tried age for the files to be transferred between pending devices.

  Maybe someone can help me find a driver that works or Toshiba will clean up their act and produce a.

  But you have installed Intel USB3.0 driver 2.0.0.102 version, right?

• Satellite U505-S2970, brick load very hot

  Hello
  I just bought a Satellite U505-S2970 14.1 "laptop with Windows 7 Best Buy." I have loaded for the first time, and in doing so, the brick load got very, very hot. Not really hot, but warm. Is this normal? I'm new to Toshiba. All my other chargers mobile phone do not get this hot.

  Thank you

  Hi mate

  Well, what to say. You will always notice a hot power adapter.
  I have two laptops at home and in both cases the AC adapters are hot. They are not hot, but hot

  It is difficult to say what temperature should be ok, but the party doesn't have to be hot.
  Because I don t know how hot your adapter is, I highly recommend contacting a local ASP (certified partner) in your country for an AC adapter control.
  The adapter needs to be replaced if necessary

  Friend of don t worry the guarantee must cover all

• Satellite Pro L50 - A - does not function keys

  Hello

  I just bought the L50, but the function button did not work. I tried to reboot, reinstall the utilities, but it did not help.

  I couldn't find the "restart flash card" also. Can anyone help?

  Thank you!

  > I just bought the L50, but the function button didn't work

  What system do you use or what system was preinstalled on this laptop?
  As far as I know a few L50 - A Satellite Pro have been pre-installed with Win 7 and Win 8 DVD could be found in the package

  The fact is that Win 7 and Win 8 are two different systems and different Toshiba tools are needed to get the FN button work.

  Your comments would be appreciated.

• Satellite L755 - Windows 7 loads OK but IE9 takes 15 minutes

  I have a L755 Satellite with Windows 7, IE 9 and Office Home 2010.
  When I boot windows 7 seems to load OK, the main problem is that IE9 takes an another 15mins to start after you click the icon.

  During this period of 15 minutes, I can use some programs such as word in a simple way, but if I try make a backup as it freezes. After 15 minutes, everything seems to work fine with the exception of the start menu which does not save the last used progs or I would like to highlight anything despite a reset.

  Any advice someone before I re - install Windows that I don't really want to do.

  You should see if ie9 starts ok if no add ons are loaded. Pull the top of the window "Run" by pressing the key "Windows" + R and entering this C:\Program may Explorer\iexplore.exe [-extoff]. If it loads ok and then click the IE Tools menu select Manage Add ons and see what you can disable if IE loaded slowly then I would uninstall it.

  I just searched to see if mail could be the problem and found this site that understands what I said and more [http://www.enhanceie.com/ie/troubleshoot.asp]

• Satellite Pro L50 - B - unable to connect at 5 GHz Wi - Fi

  Hello

  I just bought a new Satellite Pro L50 - B and it is unable to connect to the wifi of my company 5 GHz network. It connects well to the 2.4 GHz network, but poor performance on network thaat there.

  Is it possible to get the L50 - B to work in the 5 GHz range?

  Thank you

  Martin

  Frequency of 5 GHz is supported by 802.11 A and 802.11 N
  But if the WLan module is not compatible 802.11 A, then the standard 802.11 N will operate at 2.4 Ghz

  The question is: what are the standards WLan are supported by the integrated WLan module?

  Which module WLan is integrated?