Satellite U300-113 and external monitor use

Similar Questions

• Satellite A100-646 and external monitor shows black screen

  Hi all

  I have a similar problem with A100-646 (purchased in Italy). Computer laptop LCD and monitor external display screen black but without another problem at the start of the system. When the laptop is not used for a long time (half a year) it works for a week with no problems.

  Unfortunately, there is no adequate service in a place where I live. Perhaps, there is a power problem.

  Is there another idea? Does anyone have a service manual? ([email protected])

  Service manuals are available only for the technicians of the ASP.
  Unfortunately, it looks like a hardware problem, and therefore, you should get in contact with a technician for laptop to check defective parts!

• Dynadock and Satellite Pro U400-135 - external monitor question

  Hello.
  We have a serious problem on the 26 dynadock vga e Satellite Pro U400-135 unit

  The problem is:
  If set to host as a single external monitor during startup frequent windows loses resolution external monitor.

  Example of resolution monitor post seting like 1280 x 1024, start with connected dyndaock, frequent resolution 1280 x 800 not correct and external monitor image not correct.

  Operating system is Vista 32 bit, driver dynadock is 2.3 update and dynadock displaylink displaylink site 4.6.16208 site.
  Same problem with Windows Xp 32 bit.

  How can I solve the problem?

  Hello

  If I understand the first message, external monitor resolution automatically goes to 1280 x 800 even if you set it to 1280 x 1024.
  I guess that your external monitor is connected to the dynadock.
  Is this good?

  AFAIK, you can customize the video settings of the dynodock.
  It provides a video output in two modes: Mode and extended Mode of mirror.

  Mirror mode creates an identical display of your computer to the external monitor screen. In mirror Mode, the dynadock automatically selects the settings (screen resolution, color quality and discount rates) for the external monitor that will allow the best resolution based on your computer's settings.

  Maybe you use the mirror mode and therefore the dynadock the resolution automatically because it of the best for the external monitor.

  I recommend checking the Dynadock manual for more details.
  There are two modes are described there.

  Welcome them

• Satellite U300-113 - need new cover

  Is there anywhere that I would be able to take advantage of the new (casing or shell)? for my Toshiba Satellite U300-113.
  He fell recently and the housing is cracked and I would like to replace it before others damage was reported.

  Kind regards
  Darren

  Hello

  In this case only the Toshiba ASP can be useful.
  You should contact the guys from ASP to get news coverage.
  I also recommend to ask the ASP guy for a replacement.
  The guys are really quick and could replace this coverage without major problems.

  Good luck

• Satellite A300-237 - what external monitor?

  Hello

  I would buy an external LCD 19 "monitor for my Toshiba Satellite A300-237. Which is better: 4:3 / 16:9 / 16:10 / 5:4?

  Thank you

  Hello

  What image format you prefer?
  You should buy a monitor with your favorite image format.

  Generally speaking all the works according to the user manual and external monitor, your laptop supports up to 2048 horizontal and 1536 vertical pixels up to 16 m of colors on the external monitor.

• Satellite U300-113: need drivers XP

  Hello

  I am struggling to find drivers XP for Toshiba U300-113.

  It is a new machine of my friends and I would install XP for reasons nobody.

  Can someone direct me to the appropriate link on the website - I see that there are other drivers of the U300 but not specifically the U300-113 series... others will work?

  Thanks in advance for your help

  Matt

  Sorry Matt, but I'm really confused now.

  Your Satellite U300-113 has PSU30E part number. Am I wrong? If Yes, I really wonder where you looked for Windows XP drivers home because I've found 44 WXP drivers for this model of laptop on Toshiba download page http://eu.computers.toshiba-europe.com & download in support.

  Please check again.

• Tecra A2: Question about DVI and external monitor

  Hello
  I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
  Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

  Thank you
  Ralph Menon

  Hello Ralph

  Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

  The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

  Good bye

• How to get the Bluetooth works on Satellite U300-155 and Linux Kubuntu 8.04

  I bought Toshiba Satellite U300-155 and I have Kubuntu 8.04 languages, but I don't see bluetooth when I turn it on.
  How can I use bluetooth under kububtu 8.04?

  Check if the antenna of your laptop switch is on. I think that the graphic tool should exist to manage the bluetooth. However if you're familiar with the linux console
  Then, you can also try the following command to activate bluetooth:

  sudo toshset - bluetooth module Bluetooth to connect to the USB bus
  sudo hciconfig hci0 upward
  sudo lsmod toshiba_apci-online background of access keys (+)
  sudo tail-f/var/log/acpi
  module installation sudo modprobe toshiba_acpi if not already available
  Press + to turn Bluetooth on or off. Check the acpi log output
  sudo hciconfig hci0 Bluetooth peripheral power

• HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

  As you can read by the title, this computer does not connect to an external monitor using VGA.

  It will be not just to record all monitors in the control panel.

  Can I change the resolution, change the color, etc.. But it will pick up any display.

  -This computer has a HDMI port.

  -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

  -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

  -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

  After a repair, he says "device Base system has not a pilot.

  Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

  There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

• Satellite L650-0ED - ports external monitor and turn off WiFi

  Hey,.

  1. I have a Satellite L650/0ED, I was wondering if the HDMI and the external monitor port start when starting and if they cause the start time of the laptop to be slower. If they do slow down the start how disable them you using Device Manager, since I looked, I tried to disable the Device Manager; but I can't find them anywhere on the list of devices.
  They have a special code name or something?

  2. based on my understanding, the manual of instruction/userguide Toshiba mentions if I press FN + F8 it turns off the wireless amber light but this is not the case, since the amber wireless is still or not. I have the wireless active or disabled.
  It say it's so I have the wireless off of amber or the - Orange must be turned off when I press FN + F8 and is not, why is this?

  Thank you

  Hey Buddy,

  1. No, they cause t a slower start. He doesn't know me and as long as I know it of not possible to disable the ports in the BIOS. Then n t you worry about this, even, you have connected external screens, boot time is the same.

  2. Yes, usually you can activate the WLAN functionality by using the FN + F8 key combination.
  I put t have the laptop in front of me, but normally if you don t have a hardware wireless switch, you can disable the wireless network adapter in the BIOS. Just put permits for disabled people and that should be all! :)

• Using the function tablet and external monitor at the same time

  Hello

  I was hoping with the docking station and the external monitor, I can work as with an ordinary computer and at the same time to use the computer screen Tablet laptop to take notes with Journal (extended desktop display).

  Unfortunately, when I touch the screen with the stylus, it is still planned for the external monitor - no matter what I set as main display it seems just really stupid.

  Does anyone have an idea how to prevent this?

  divB

  I've updated to the latest official drivers from the Wacom homepage (not Lenovo-, they are old!) and it seems to work!

  I hope he'll stay until now.

• Connection ethernet and external monitor

  Is it possible to connect an ethernet cable and a VGA adapter to a MAC AIR at the same time?  I use my crush on internet in my school and I would like to use an external monitor at the same time.

  There are two options: a dear TB hub that allows you to add additional ports or a USB Ethernet adapter. The USB adapter will be slower, but depending on the speed of your school's network you may not notice a difference.

• MacBook 12 "and external monitors - experiences

  That I have not found much info on using a MacBook 12 "with external monitors (but have found problems), I thought I would post my experiences here for the benefit of other researchers:

  MacBook 12 "with Dell u3415w (3440 x 1440) via a USB - C adapter Digital AV Multiport (HDMI):

  VIDEO: Experienced random black screens on the external monitor. After update to El Capitan 10.11.4 version which included an update of the firmware of the adapter, the problem become constant, with the external screen crashing to black seconds nonstop. Switching the HDMI on the MHL port on the monitor completely solved this problem.

  VIDEO: I'm only able to get a resolution of 2560 x 1080 scaling to fill the screen, which is a little fuzzy but fine for office tasks - selection reduced 3440 x 1440 or "best resolution for this monitor" translates into a look, windowed 16:9, with black bars on the right and left. I have not yet found solution to reach ultra-wide 21:9 angle at the native resolution (but would appreciate a).

  VIDEO: Macbook 12 discs easily display 3440 x 1440 for tasks of office such as word processing and surfing. Video full HD YouTube is generally good, but gets now and then a little agitated.

  AUDIO: Holding Option and clicking on the speaker icon in the menu bar show selectable option for the audio output to the device (monitor). On this screen, it seems to be a problem of reception of the signal of the Macbook when another device is connected to another port. In my case, a PC connected to the DisplayPort would be "laundered" the audio signal of Mac but ONLY if the PC has been out audio through external speakers, not the monitor (a lot of trial and error to discover this. When the audio PC sent ONLY to the screen, the monitor then accept the audio signal of the Mac, too. But have an external speaker connected via a cable audio 3.5 mm to the pc mobo (taken minijack) would somehow replace the TWO PC and Mac audio signal to the monitor. Something to do through the DP connection maybe)

  with ASUS PB27Q (2560 x 1440) via an adapter, no problem.

  with ASUS PA328Q more ASUS PB287Q (3840 x 2160 or '4 K') using the same adapter. Cursor extremely lag/Office up to that you enable DP (Displayport) 1.2 through settings on the screen of the monitors. This allows the Macbook to drive a monitor 4K at 30 Hz, which is always a little laggy, but realistic enough to be productive for word processing, surfing, etc. Would not recommend a 4K monitor for Macbook 12 for a really "nice" experience until / unless that 60 Hz is an option.

  Hope someone finds this is useful.

  Mac Book 12 with external monitor Acer H277 Hu with Usb c

  random black screens

• Tecra A10 - BSOD with Port Replicator Port and external monitor

  Hello

  I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

  BSOD is a STOP 0x0000007E in igxpmp32.sys

  I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

  Any help or advice by eliminating the BSOD would be greatly appreciated.

  Kind regards

  Rhys.

  Hi mate,

  I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
  [www.intel.com]

  Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

  In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?

• Portege M800 and external monitor Dynadock question

  I have a M800 connected to a U Dynadock docking station.
  I have problems when I try and put my external monitor as the primary device and have the cell phone as the extension to monitor.

  I am running Windows XP.

  Are the only options it will allow: Clone, Extended (laptop is main and external is the extended option)

  If I use the WIndows graphic option it does not put the external monitor as the main display (I check this option and click on apply and it remains unchecked)

  If someone could help that would be great.
  Otherwise, I would recommend is not to use the dynadock

  Sorry mate but I still don t understand what you are talking about what problem do you have?

  Is the Dynadock video drivers give you the ability to view a total of three screens.
  -L' screen of the laptop.
  -external monitor connected to the video port on the laptop (if available)
  -ewxternal monitor connected to the Dynadock

  In addition, you can use mirror Mode and Extended Mode.

  Mirror Mode creates an identical view between your computer screen and the external monitor
  Extended mode extended Mode lets you split your display on multiple monitors.

  These are the features that you can use with Dynadock