Windows 7 starts and ends at a black screen

Similar Questions

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• My computer takes 20 minutes to start and also has a black screen

  Hello world

  I have a Dell Dimension 9200 and recently every time I start my computer or it reboot, it takes 20 minutes to get to the desktop and also has a black screen. This issue has occurred only recently and I don't know what is the cause and so advice would be welcome.

  Other strange things include all my system restore points are missing and so I can't return the operating system to a previous date when it was working properly.

  And when I did a test on the hard disk, one of the internal drives have had a "Fail" result - Code 7 back. I don't know if this was caused by a virus or is the result of a mechanical failure in the hard drive itself.

  Thank you very much.

  Gordon

  

  Bev.

• Windows 7 starts, but goes to a black screen with the mouse before the Welcome screen

  Windows 7 starts up goes to the "starting windows" logo screen, then before you get to the homepage for a connection, becomes black and be left with just a cursor. tried to restart and start up repair but I have no way to access because of safe mode is the same thing then. What is the best way to fix this without losing all the stuff on my computer for work.

  Hello

  Remove all connected devices (except the mouse and keyboard if it is a desktop computer) to the computer and then try to start and check what is happening.

  You can try to boot from the installation disc, and then check if you are able to perform a startup repair, or run the Windows Memory Diagnostic tool.

  Follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• taking about 6 minutes or longer at the start and saying in a black screen 'remove shading '.

  original title: "remove the cloak."

  My Compaq Presario desktop computer running Vista Ultimate SP2.  I added 1 GB graphics card, 4 GB memory and a 4GB USB flash drive as ReadyBoost.  Now it takes about 6 minutes or more to start and saying to a screen black 'Remove shadowing' does that mean?  Please help, thanks.

  AB

  Hello

  you don't say what version of bits you use; 32-bit or 64-bit

  read these articles on the occultation of the memory

  http://www.hardwareanalysis.com/content/topic/71919/

  http://support.Microsoft.com/kb/78528

  http://www.velocityreviews.com/forums/t185253-how-do-i-turn-off-shadowing-in-BIOS.html

  in a 32-bit vista of the most RAM system, you can install is 4GBs of RAM and it can only use 3.15GBs of that anyway

  get rid of the Readyboost which is designed to be used in the machines to improve performance which have only about 1 GB of RAM

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• How does the index start and end in the reference Word text VI to a word document?

  How a correlation between the index values start and end to a position or coordinate in a Word document?

  Is it a type of lookup table that will refer to a value of say '35' (to start) to a line or a particular character of the position in a Word document? There is nothing in LV help which explains nothing other than the value '-1 '.

  Hey, JayB,.

  The start and end of the Text.vi in Format Word values are the positions of the characters in the document. The values start at 0 on the first (or ASCII character such as a space, tab, or carriage return) and for each character (or the ASCII character). So for example if I wanted to "BOLD" the word "carrots" in the list below, where the values start at 0 on the word 'grocery store '.

  Grocery store:

  Apples

  Black berries

  Carrots

  Detergent

  Then I would enter a start 33 and the end of the 40s, making sure to count the ramasseherbe returns and spaces.

  I hope this helps.

  Logan H

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• Photoshop CC 2015 is a line connecting the start and end of the brush strokes

  Hi guys,.

  I had a strange problem with a certain brush (size 5px, difficult tour, no shape dynamics, no transfer) in Photoshop CC 2015.1.2.

  It only happens when the drawing very fast on my Cintiq 22HD.

  The problem is PS is a line connecting the start and end of the brush strokes. I don't hold in shift or whatever it is.

  

  Here's my brush settings:
  

  I use a PC with these specs:

  Intel Core i7 - 4790 K 4.00 GHz

  ASUS motherboard

  NVIDIA GeForce GTX 970 (10.18.13.5354 driver version)

  16 GB OF RAM

  Cintiq 22HD

  Win 10
  

  Is it a question of PS or Cintiq?

  Thanks for help.

  OK, here is therefore an update.

  The problem is not at all with Photoshop or Cintiq, with Windows 10 parameters of the stylus.

  Fortunately, there is a small piece of free software that you can download called "Fix my pen" (by Smith Reddy) which defines the features of Windows Tablet PC in the registry for you (essentially by disabling everything related to it):

  viziblr - News - difficulty my pen makes your Wacom tablet JUST WORK on Windows 7

  It works fine on Win10 too.

  Now, as my original problem with Photoshop to do a line connecting the start and end of the brush strokes left, however I have another question more small that came after running difficulty my pen. The lines that I draw now are not smoothed by a software more. You can see the difference below.

  

  Fix My Pen sets a lot of things in the registry, but you cannot individually control which setting is disabled. So I guess that one of them is the cause.

  

  I expect response from Smith about it, cause I have no idea who he is.

• Why threads start and end at random?

  Hello
  
  I had the program below. I wonder why mark the beginning of discussions and put an end to chance? Every time I run the program, it produces different results.
  
  I know these four threads have gotten the same priority normal (or 5) and under windows, there is only something called timeslice. These four threads then turn using this timeslice. How do we know what exactly the timeslice is in seconds? If the timeslice is fix, then why are the results random?
  
  Thanks in advance!
  
  /*
  * To change this template, choose Tools | Templates
  * and open the template in the editor.
  */
  package mythreadone;
  
  /**
  *
  Administrator of * @author
  */
  / public class MyThreadOne implements Runnable {}
  
  String tName;
  Thread t;
  
  MyThreadOne (String threadName) {}
  tNom = threadName;
  t = new Thread (this, tNom);
  t.Start ();
  }
  
  public void run() {}
  try {}
  System.out.println ("Thread:" + tName);
  Thread.Sleep (2000);
  } catch (InterruptedException e) {}
  System.out.println ("Exception: thread")
  tNom + "interrupted");
  }
  System.out.println ("completed thread:" + tName);
  }
  
  Public Shared Sub main (String [] args) {}
  
  Why threads start and end at random?
  new MyThreadOne("1");
  new MyThreadOne("2");
  new MyThreadOne("3");
  new MyThreadOne("4");
  try {}
  Thread.Sleep (10000);
  Thread.Sleep (2000);
  } catch (InterruptedException e) {}
  System.out.println)
  "" Exception: main Thread interrupted. ");"
  }
  System.out.println)
  "' Complete thread: main thread."); "
  }
  }
  
  
  1. first of all, I put in the main function:
  
  Thread.Sleep (10000);
  
  and I run the program it gives:
  
  Thread: 1
  Thread: 4
  Thread: 2
  Thread: 3
  Wire termination: 1
  Wire termination: 3
  Wire termination: 4
  Complete thread: 2
  Complete thread: main thread.
  BUILD successful (total time: 10 seconds)
  
  Run it again, it gives:
  
  Thread: 2
  Thread: 4
  Thread: 3
  Thread: 1
  Complete thread: 2
  Wire termination: 1
  Wire termination: 3
  Wire termination: 4
  Complete thread: main thread.
  BUILD successful (total time: 10 seconds)
  
  And my question is why it displays like this? It suppose to be:
  
  Thread: 1
  Thread: 2
  Thread: 3
  Thread: 4
  Wire termination: 1
  Complete thread: 2
  Wire termination: 3
  Wire termination: 4
  Complete thread: main thread.
  BUILD successful (total time: 10 seconds)
  
  Why these four threads begin and end at random whenever I run the program? I use Windows, assume that there is a timeslice (i.e. 1 second), these discussions have the same priority. Then the son must begin and end in turn one. Am I wrong?
  
  2. my second question is:
  
  When I change the codes of the 'main' function, in:
  
  Thread.Sleep (10000); -> Thread.sleep (2000);
  
  It gives me the results as:
  
  Thread: 1
  Thread: 4
  Thread: 3
  Thread: 2
  Complete thread: main thread.
  Wire termination: 1
  Wire termination: 4
  Wire termination: 3
  Complete thread: 2
  BUILD successful (total time: 2 seconds)
  
  Run it again:
  
  Thread: 1
  Thread: 2
  Thread: 3
  Thread: 4
  Wire termination: 3
  Complete thread: main thread.
  Wire termination: 4
  Complete thread: 2
  Wire termination: 1
  BUILD successful (total time: 2 seconds)
  
  I tried several times. The main thread always ends before or after the first child thread over.
  
  My question is why he didn't come out something like:
  
  Thread: 1
  Thread: 2
  Thread: 3
  Thread: 4
  Wire termination: 3
  Wire termination: 4
  Complete thread: 2
  Complete thread: main thread.
  Wire termination: 1
  BUILD successful (total time: 2 seconds)
  
  or
  
  Thread: 1
  Thread: 2
  Thread: 3
  Thread: 4
  Wire termination: 3
  Wire termination: 4
  Complete thread: 2
  Wire termination: 1
  Complete thread: main thread.
  BUILD successful (total time: 2 seconds)

  user13476736 wrote:
  You can specify the reason please? See you soon.

  It's pretty simple. Start-up and execution of threads are not an operation of determenistic on operating systems that do not support hard real-time requirements. (Most operating systems do not support hard real-time requirements)

• Since the update to firefox 10.0 (and then 10.0.1), the bottom of the Page, the Page Up keys, start and end work correctly. Is that what someone else has this problem, and are there any suggestions for a fix?

  for example, I read a Web page, when I push the bottom of the keyboard Page, sometimes nothing happens. Sometimes the page scroll a few lines but then does not continue to scroll down when I push the key several times. Sometimes the page immediately jumps to the bottom of the page; etc. Similar issues occur, in the direction towards the top, when I press the Page up key. The keys start and end are completely "dead", because the page does not move when I press them.
  It is important to note that all these keys work as usual when I open the browser Chrome or Internet Explorer, and other applications in which keys should be functional, so this problem is specific to Firefox.

  Hello

  Please check if still use the keys cursor to navigate through the pages is selected in Tools (Alt + T) > Options > Advanced > general and uncheck. This setting can also be turned on/off by pressing F7.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• Anyone know what is the price of Windows 7 Starter and Home Basic? I need to know the full version (not the cost of upgrade) price

  Anyone know what is the price of Windows 7 Starter and Home Basic? I need to know the price list of the full version (not the cost of upgrade)

  Windows 7 Starter is not available as a product of the retail. It only comes on new NetBook or Nettop computers.

  Windows 7 Home Basic Edition is only available in some markets, it will be difficult to find in the markets developed as the United States.

  Windows 7 price India

  Microsoft Store

  http://www.microsoftstore.co.in/Microsoft/38/ProductList/Windows.aspx

• Windows install starts and goes out of order

  HI, every time I stat of the programs folder browser, (such as to open a file or save etc), Windows install start and the program become non responsive and I am forced to stop, all iodea how to fix it?

  HI, every time I stat of the programs folder browser, (such as to open a file or save etc), Windows install start and the program become non responsive and I am forced to stop, all iodea how to fix it?

  Hi, Douai,

  This phenomenon occurs with just one or all programs?

  Start > type CMD

  Right ClickON CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  Asked may to your WIndows Installation DVD if there is missing or corrupted files.  If the analysis shows a message "can not repair file...", you need to reinstall Windows OS.

  Try to unregister Windows Installer, and then reregister Windows Installer.

  To do this, follow these steps:

  a. Click Start, type cmd, right-click cmd, and then click Run as administrator.

  b. at the command prompt, type "msiexec /unreg" and press ENTER.

  (c) in the command prompt, type "msiexec/regserver" and press ENTER.

  d. check the difference.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-can-i-install-the-Windows-Installer-50/4a56421a-863c-4331-ada5-e2d503298a65

• just formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded

  I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .

  Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.

  Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?

  http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/

  If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  With Windows XP installed first:
  http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/