Satellite A100-803 - no sound

Similar Questions

• Satellite A100-803 - Vista recovery problem

  Hello

  I upgraded the RAM and HDD on a Satellite A100-803 and when I restore Windows Vista from the recovery disk process is going very well, but after restarting windows says that "Windows Setup could not set up Windows on this s material.

  I think that the problem is listed here.
  http://support.Microsoft.com/kb/2466753/en-us.

  But the problem is that I can't change the RAID setting in the BIOS, and during the installation of recovery, I'm not able to add the additional drivers needed.
  The new drive is a WD 500 GB driver (WD5000BPVT)

  How can I solve this problem?
  Thanks in advance
  Pau

  Hello

  First I put t think its BIOS problem.
  The laptop doesn't support RAID.

  I think the problem is the size of your new HARD drive. Upgrade of the disk HARD 500 GB and its larger than the original HARD drive equipped in A100.

  The point is that a recovery disk automatically creates the partitions on the HARD disk, but due to the size of the disk HARD the size of the partitions would be different also.
  I think that you won't have the same problems to install Vista or Win 7 using the Microsoft disk

• I would like to upgrade the RAM of the Satellite A100-803

  Hello

  I want to upgrade the RAM of my Satellite A100-803, which uses actually PC2-533, at 4 GB.

  Can I upgrade to PC2 - 667?
  Do I need Dual-Channel?
  One advises on what brand or the best model to use?

  If I not mistaken and for what I could see around the internet, I should be able to switch to 4 GB PC2-667 and Dual-Channel should not be necessary. But an expert of confirmation would be appreciated.

  Thanks in advance,

  Best regards.

  Javier.

  Hello

  Laptop computer supports Mobile Intel® 945GM Express Chipset.
  These results support single / dual channel DDR2 SDRAM
  Maximum memory supported: up to 4 GB to 400, 533 and 667 MHz
  http://www.Intel.com/assets/PDF/datasheet/309219.PDF

  Then PC2-667 modules are supported

• Re: Satellite A100-803 - CPU Upgrade question

  I have a laptop Toshiba Satellite A100-803 at the moment. There is an Intel Core 2 Duo T5200 inside and it is a bit slow. Also, it does not support VT - x extensions.

  My idea is to build a simple hobby-server which should run Gentoo with Xen on it. I can buy an Intel Core 2 Duo T7600, but there are two things I'd like to know.

  1 the bios does support the Intel Core 2 Duo T7600?
  2. If she supports the Intel Core 2 Duo T7600, is it possible to use VT - x extensions?

  > 1. The bios supports the Intel Core 2 Duo T7600?
  It is not known to me, but you should check if the chipset supports the Intel Core 2 Duo T7600. If the chipset does not support this CPU you can not use this CPU in your A100. But if the chipset would support the new CPU then you ve good chances to use this component.

  > 2. If she supports the Intel Core 2 Duo T7600, is it possible to use VT - x extensions?
  Hmm, that's a good question; as far as I know the BIOS must support the feature VT - x to use it of course the CPU must support this too so I think that VT - x should be available if the update for Intel Core 2 Duo T7600 would be successful

• Satellite A100-847 - Virtual sound driver for Windows 7?

  Hi guys,.

  Is there an available virtual driver sound for win7?

  I use Satellite A100-847 and impossible to find some drivers.

  Thanks for your help.

  Hey,.

  What is a virtual sound driver?
  I know only driver sound but where is the difference with the virtual audio drivers?

  In any case, you should check the Web from Toshiba site if you can find the drivers for Satellite A100-847 and Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite A100-590: no sound

  Hello

  my A 100 has no more sound. I reinstalled the driver Mustek sound, but the same story again.
  Regulators speaker correctly in central position but nothing to hear.

  Everybody is a good proposal to finalize this dilemma?

  Hello

  It's very strange and I imagine that you did something and now the noise has gone. Satellite A100 (PSAA9E) is well known to me and WXP works very stabile. Have you tried to roll back the OS to an earlier when time its worked well?

  Try it using the System Restore tool.

• Satellite A100-803 - motherboard problem

  Hello

  I bought a laptop Toshiba A100-803, two years ago and now I can't turn on the PC.
  We check the laptop and the problem is on the motherboard.

  Anyone know who is motherboard´s ID? Thank you

  Hello

  The motherboard is Toshiba.
  You must use motherboards manufactured for Satellite/Satellite Pro/Equium A100.

  So you can use google to get a new motherboard, or you can request an ASP for help.
  You can order the partner service authorized in your country but new mobo mobo costs a small fortune.

• Satellite A100 PSAA8E - no sound on Windows XP

  My Toshiba A100 (PSAA8E) initially provided with Windows XP
  I it have been upgraded to Vista with the option express upgrade.

  Some of my basic software were not supported so I reinstalled Windows XP Professional with Service Pack 2.
  After a lot of research on this forum and the net, I managed to get all my components to work.

  However, I am still a yellow question mark on my sound and SM Bus controller still does not work.
  SM Bus controller doesn't bother me (what it is, I don't know yet), but its not working not not is a big setback.

  I tried to download the drivers from toshiba site soundxp5... (something like that) and others, but nothing worked.

  Can any one guide me through the steps one by one, that will help get to get the sound back?

  PS: I have a system restore DVD, but it will take a full format and I lose all my data.
  Never again, he will restore vista while I need XP.

  Hello

  It is a known issue and it always seems if two important fixes from Microsoft were not installed.
  You will need to install the fixes KB888111 and KB835221 first before installing the audio driver.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31967

  If after installation of hotfixes mentioned in XP you should restart the notebook and then need to install the driver of his newest site Web of Realtek.

  See you soon and I would like to know if the sound is working again.

• Satellite A100 (PSAA2E) - no sound after installing Windows XP

  I recently installed XP Pro on my laptop. It was previously running XP Home. Now I have no sound. I downloaded the Realtek drivers on the Toshiba site & also tried different drivers from the Realtek site, all without effect. Realtek sound appears in the Manager of devices as "w.orking correctly. Detached & allowing him to be detected again also has no effect. Any advice is welcome.

  Hi cvaughan,

  Have you installed SP3 for Windows XP? If this isn't the case, you should do it, because it contains important updates for the sound card drivers.

  So to remove the current sound driver, install SP3 and then reinstall the audio driver.

  Check this box!

• Satellite A100 - 803 (PSAANE) - Trouble updating the BIOS in Vista

  Hello

  I tried to update the BIOS on my laptop today. After the installation of the new BIOS, restarted the pc and then it showed a black screen with white display text material in the machine.

  In the end, it says something about a corrupt CMOS. She said press F1 to default or F2 for Setup.

  I pressed F1.

  The thing is that I don't know if it worked. I used a program to display the bios version and it seems up to date, but the CMOS thing me freaked out.

  I met all of the planned maneuvers (AC adapter / CC plugged etc.) except in startup mode. I assumed that the boot mode is currently in the standard vista desktop.

  * What is this thing of startup mode? * It's driving me crazy. I searched the forums, google and nothing. How can I get the computer to "boot mode and not recovery mode" as the tutorial says.

  I intend to reinstall the BIOS as soon as I know how to enter in the boot mode.

  I think that this announcement has already answered in this thread:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=122727#122727

  You're talking about the traditional BIOS update, but the fact is that on the Toshiba driver page you will find ONLY the base BIOS update windows.
  All new BIOS updates are versions of WIN and can be updated only running a Windows operating system.

  In the BIOS, the package should be unzipped everything first, and then an .exe file must be run.

  That s all ;)

• Re: Satellite A100-803 PSAANE won't start no-glued on the Bios POST

  Hello

  I have the following problem with a laptop computer to a customer.
  After having turned it on, it has the logo Toshiba rest on and everything is hanging there.

  After pressing ESC, there is a message: "NO TPN or TPN has problem.
  So, I think that the Bios broke down. How, I don't know.

  Trying to enter in the setup by pressing F2 system displays "enter the configuration" but nothing happens. He stayus on this screen.
  Is there a solution I can try to recover the Bios damaged from a USB or a USB floppy drive.

  I checked the Toshiba support site, there is a Bios Update, but it is a program that should be started in Windows so I can't use it.
  Anyone have an idea how I can recover the corrupted Bios.
  I have already removed the battery and the power and hold the powerbutton to for +-30 sec, but that does not solve the problem.

  Thanks for help out me.

  Best regards

  Cauberghe Didier
  Dealer.

  Hello

  You are right. There are, it's no BIOS which can be not started BOF on floppy or USB key.
  You must update the BISO running windows OS.
  But according to your message, it is not possible.

  If you have no alternative but to contact the maintainer authorized Toshiba in your country.
  Guys should be able to help you. I presume that the technicians have access to the traditional BIOS version that can be updated using a disk.

  Good

• Sound problems after installing Vista on Satellite A100

  Hello

  I have something new, something I've never seen and I do not much [as appropriate] of you.

  Today, I installed Windows Vista Beta 2 on my laptop Satellite A100-192. As it is Vista compatible now [I added some memory] I think it's the right time to see the new operating system [that is great, he will rule the world for sure].

  But back to the topic.
  After the installation of Windows Vista, which has detected almost all of the software in my pc and have fun on this topic / and there are a lot of things an old fart like me, can have fun with / I decided it's time to get back to work.
  So I restarted my toshiba for win xp, started working and has decided that music will surely improve my / concentration i'm from Poland and as many of you know, my team lost the first game of the 2006 World Cup. so they will not pass the group stage of WC2K6--real cause my humor today. After turning on my foobar, I realized that I don't hear nothing/i do not drink, so he can't really be the cause. I've set all volume settings, all the settings of the sound and nothing! I tried headphone jack, but it does not work too. I tried reinstalling the drivers, reboot the system several times and... nothing.
  I went back to Vista and... sound works like a charm.

  Bromine to Vista my sound on XP...

  Anyone has any bright ideas, how this could have happened and how to solv it / accept to remove vista from windows...?

  I would be greatfull for some advice...

  Best regards
  Krystian

  Hello Krystian

  If you use recovery media supplied for installation of WXP is the noise problem persist?

• Satellite A100 - no sound with Windows XP Pro SP3

  Hello

  I'm the reconstruction of a laptop Toshiba A100-PSAA9A-10U038 with a new installation of Windows XP Pro SP3.

  At this point, I have not all sounds (Yes, the volume is set to the top).

  As this is my first post I covered I hope that most of the bases as with SP3 and I installed all the updates available from Toshiba and Microsoft - well at least, I guess I have. I downloaded the latest updates from Realtek who advised in a general forum but no luck.

  Device Manager tells me that there are problems with a "PCI Device" and a "unknown device", and I assume that one of these two is the culprit.

  Any suggestions would be much appreciated.

  Hi mate

  I think that you have installed the driver of his evil.
  See this page:
  http://www.MyToshiba.com.au/support/notebooks/satellite/A100/psaa9a-10u038/download?OS=22

  you will find all of the Win XP drivers for this model of laptop.
  As you can see there are two different Realtek drivers:
  V Realtek Audio Driver 5.10.0.5253
  -Realtek ALC861 Audio Driver 5.10.0.5200

  To my knowledge, you have the Realtek HD audio Manager.
  But before install you the audio driver SP3 must be installed, it seems, that you did
  However, the most recent audio Realtek driver can be downloaded from the Realtek page directly.
  Select this check box, and then choose Manager Realtek HD audio for Win XP.

  Should work.

• Satellite A100 - 01 L (PSAAR): XP sound driver need

  Hello

  I need a sound driver for my laptop. It is a 01 L A100 (PSAAR). For PSAAR are just Vista drivers online... but I need one for XP... I tried all PSAA9 audio drivers... but they don't work! :(

  I don't know why... I hope toshiba will publish drivers for PSAAR for XP soon, too... anyone know what driver would work? (Sorry for my English... I am from the Germany)

  Hello

  The laptop uses a Realtek ALC861 audio chip.
  Therefore, take a look on the realtek site and download the driver that supports this chip!

  But it's very strange. Satellite A100 PSAA9E series uses the same sound chip and driver XP it works also on your laptop.

  A tip: If the sound card has been recognized in the Device Manager, the driver is OK. In this case, you will need to check the volume and controls.

• Need driver Sound WXP for Satellite A100 (PSAARH)

  My Satellite A100 is shipped with the version of Vista, when I downgrade to XP, the audio driver may install correctly but there is no sound. (I check software and hardware button).
  do you know that drivers will work on windows xp?

  Hello
  I PSAARE (A100-011) and I spent from Vista to XP Professional and I need to download the new version of the realtek drivers 1.61 and it works perfectly. I wonder do you also have problem with PCI device unknown who in fact is Texas Instruments Texas Instruments PCIxx21 Integrated FlashMedia Controller. It cannot be installed with all Toshiba drivers, and it is the SD card reader.