Satellite A100 - BSOD on startup and often refuses to load windows.

Hello

I've had my laptop A100 little over 3 years now and there is a moment he began to stop loading when I lit. He would often be an opportunity "the window loading" icon and then stay there indefinitely. Then he began to spotaneously telling me that I had a blue error screen and restart the whole process.
Sometimes it lights fine.

The battery is no longer in charge right now that when I plug in my laptop it trying to load (but it remains at 0%). The computer will work without batteries.
I think (or maybe just imagine) that if I wait until the orange light for the batteries to charge turns off until I turn on my laptop it tends to start the first time.
Can someone tell me what is the problem with my laptop and if there is anything I can do about it?

Thank you
Jen.

Hi Jen,

There are many reasons that can cause this kind of behavior...
-Make sure that the hard drive is free of errors
-check if the battery is ok (check the duration)
-load for 24 hours
-check the memory (ramtest)
in many cases the hard disk has errors, bad would be a damaged mainboard...
but without checking the components, you will not be able to determine the "real"...

ask a help servicepartner

perhaps only the battery is bad...
start the laptop without battery and watch if failures happen again.

Tags: Toshiba

Similar Questions

  • Satellite A100 beeps at startup and goes straight to the mode without boot failure

    When I turn on my A100 there is a beep and I'll striaght on-screen 'safe start mode.
    I can then load normally in windows XP and everything is OK. Is something missing?

    The computer is less than two years.

    See you soon
    John

    Hello

    > 'safe start mode.
    Do you mean that your Windows operating system starts only in safe mode?

    If yes then it might be something wrong with the system files or the registry.
    How do you reinstall the operating system on your laptop? Is it 2 years ago?
    Eventually it s time for a new OS update?  :|

    If you the problem is only with the software, then a new recovery would solve the problem.

    Good luck my friend

  • Satellite A100 PSAA9A - can read DVD BUT not CD with Windows XP

    I use a satellite A100 PSAA9A computer laptop and I started having trouble with the CD/DVD drive. It was working fine until yesterday when he decided not read no matter what CD I get the message asking me to insert a disc, when there is a CD in the drive. It still reads DVD good.
    I don't know if he has anything to do with the download of the updates of Windows XP because the troubl seems to start after I did.
    Is there somewhere in the creation for the player who controls this? Also when I run the troubleshooting test it always ignores the test of this drive.
    I'd appreciate any help.
    See you soon

    Optical drives, DVDS, has some different faces to work with CD and DVD, but objective and optics are the same. He had arrived, when in one two heads become a dust or something else. I thing that you must visit the Service and your disk cleanup. But do not use a cleaning disc!
    PS. Windows updates, as and OS, are not issues.
    Make sure it's easy - attempt to start bootCD (not BootDVD) with anyone by pressing F12 at startup. If the running machine - it's Windows, if not - DVD player.
    See you soon

  • How can I move all the information of the computer without having to hit F1 or F2 at startup and go directly to the windows desktop in Windows XP

    How can I move all the information of the computer without having to hit F1 or F2 at startup and go directly to the windows desktop in Windows XP

    see if this article applies to your question:

    http://www.computerhope.com/issues/ch000301.htm

    a method to determine if the motherboard (cmos battery) battery should be replaced is to monitor the time in the windows desktop.

    If windows does not have the exact time, then the motherboard battery is low and must be replaced.

  • Satellite A100 beep at startup

    My Satellite A100 still beeps at startup (or when he wakes up after hibernation) as if a key is pressed down, and it will not stop until I press one ' ~ ' key (just below "Esc"). In addition, it begins this character by typing in the field log-in on the start screen.

    Any ideas why this might happen?

    HI Maria,

    It seems to me that if the key is either stuck or is defective. It is possible that the keys are shorted or the rubber under the top key shared so that contacts of does not return to the open"" position.

    I suggest that you only contact authorized Service partner who can check the keyboard.

    Kind regards

  • Satellite A100-999 - screen flickers and goes black

    Hi, I have a problem with my Satellite A100-999.

    The screen flickers and then goes black. The works still laptop as I can connect to external monitors, but the laptop monitor are almost entirely black. It's happened before, but a reboot seemed to solve, however, Noah, as soon as the sign of the intel appears at startup, the screen turns off. It is not completely black - you can see the contours of some things on the screen, but it is almost completely black.

    Thanks for your help.

    Hi xiuxiuejar_1,

    HM, if you can still see a picture on the laptop external monitor should be ok and it must be a problem with built-in LCD screen.

    Usually, if the display is it black malfunction in UPS s FL which controls the backlight of the screen, but if the screen flickers, it s the internal LCD display itself

    I guess that your laptop is not under warranty more so I would try exchanging the FL inverter it's a lot cheaper. You can order this FL inverter of an ASP or eBay but is not so easy to replace, because you have to disassemble the laptop monitor.

  • Satellite A100 - unrecoverable system error and restart

    Without warning my Satellite A100 don't close but reboot, I removed the auto reboot, and the error that is displayed in the BSOD is:

    STOP: c000021a {fatal system error}
    The Windows Logon Process system process ended unexpectedly with status 0xc0000000 (0x00000000 0 x 0000000)

    in the event where Viewer does not appear anything on the error, I tried a system restore but it cannot exercise, in the event viewer this time it is written that he cannot run because the PC is not turned off regularly,
    How can I do?
    The BSOD appear in the last stop after the color screen when turned on the black screen just before the
    Turn off the power.

    your
    Fabio

    Hi flottero,

    It of always a little difficult to discuss these blue screens because many things could be the reason, but in most cases it s a hardware or driver problem.

    If system restore doesn't work, can you try to restore Windows recovery disk settings, please? After that, you get back factory settings and so you can identify a hardware problem or software.

    Check this box!

  • Satellite A100 - compatibility SSD drive and recommendations?

    Hello.
    I want to replace the original HARD drive in my Satellite A100-811 with an SSD.
    What are the parameters for search? I can just about any 2.5 "SATA II SSD on the market?
    Intel X 25 - M Mainstream SATA SSD 160 GB G2 is compatible?
    Are there recommendations for Toshiba?

    Thank you!

    Hello

    A100 controller SATA HDD support.
    Generally, it should be possible to use the laptop as part of a SATA SSD drive.
    But I also read that not all laptops can properly manage the SSD drive.
    In some cases the SSD update the firmware of the player might help.
    So I can't say with certainty that the new SSD will work properly and that the BIOS would properly recognize the SSD.
    I think you'll need to test the SSD drive
    You could order it on Amazon and could test, in the worst case you could send again
    I did it too with some RAM modules that didn t work in my notebook.

    Please post some details if these updates succeeded or not, it would be interesting to know if you can use it in your A100 because I would use a SSD drive too

  • Satellite A100 - closed by itself and no longer starts

    Satellite A100 PSAA9A-10U038. Laptop shut down by itself, while in use. No BIOS upgrades or changes. No light no no list, no JOB.
    I tried the power adapter on another machine and works fine. Called Toshiba me adapter probably at fault, if I want to have the look will cost you $120.
    I think maybe the mother died? Any help would be appreciated.

    Tony

    Hello

    Looks like a hardware malfunction...

    I think you need professional help of an authorized service to pick up your Satellite A100 works again.

    On the Toshiba site I founded a list of s: ASP.
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • Satellite A100-225 keeps freezing and crashing with the new HARD drive

    Hi all

    I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

    I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

    I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

    Thank you

    Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
    In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

    I can't say for sure, but there must be a compatibility problem.

    Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

    Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

  • Satellite A100 - 495 (PSAA9) - CPU and GPU upgrade

    Hi all

    I have a few questions.
    I have a Satellite A100-495 with 2 GB of Ram, Core2Duo 1.83 GHz (2 x; T5600) and an NVIDIA Geforce 7600go.
    I want to spend the CPU and the GPU. Is this possible?
    I don't want to do. I am looking for a store (if possible in Germany) that can do this.

    If its possible, what it costs? And what store can I speak?

    If this is not possible-> why? It is fixed; It getting too hot?

    What solution do I? I don't want to buy a new laptop.

    Kind regards
    Dave

    Update CPU and GPU on laptop computers is complicated enough or is not possible. At first, I must say that GPU is part of the motherboard and graphics card can not be upgraded at all.

    What about the CPU upgrade? Toshiba authorized service providers will not do that and the CPU upgrade is not supported. Few people on this forum have talked about CPU upgrade, but for me the risk is too high. All hardware components are adapted to the work well together and also to reduce the risk of damaging the material. The BIOS is also suitable for the specific hardware configuration. The values of the fans are also tested and there is no risk of overheating.

    Change CPU, you will get no more powerful laptop. Modern processors are powerful enough and a few MHz more won't do anymore difference. What you can do is to increase the RAM to the maximum level - 4 GB. That s all what you should do and your laptop runs a lot faster.

    Also be careful on the configuration of the operating system. This will also help make your laptop faster than before.

    By the way: for operations you need more power? What you want to do with your laptop?

  • Satellite A100 - 294 PSAA8E: black and white TV without sound picture

    Dear all,
    When I select the TV mode, my TV shows black and white color without noise.
    WHY?

    I have:
    Satellite A100-294
    Part number: PSAA8E-02T014GR

    I check the cable to use it in my CAM.

    Hello

    I assume that you have chosen the wrong settings of PAL/NTSC.

    Please check if you are using the right settings that correspond with your country where you live.

  • Satellite A100 - 011 (PSAAR): where to find the drivers for Windows XP?

    Hi all

    are there opportunities to find windows XP drivers for my Toshiba Satellite A100-011 (PSAAR).
    in order to remove vista and install XP?

    Thanks in advance,
    Alex

    Hello

    Maybe this topic can help you:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20083&MessageID=76256

    By the way: If you check this section of the forum you will find several topics where you can find answer to your question.

  • Satellite 2450-201: slow startup and shutdown

    I HAVE A SATELLITE 2450-201 AND I RUN ON WINDOWS XP HOME EDITION, I DID A REGISTRY CLEANER EVERYBODYS USERNAME USING REGISTRY FIX 5.5
    I HAVE DEFRAGED MY PC AND ALSO OPTIMIZED MY MSCONFIG STARTUP ITEMS AND EVEN THE BIOS UPDATE.
    THE RESULT IS EXTREMELY FASTER WHEN I CONNECT AND ACTUALLY UNDER WINDOWS BUT THE SAME OLD VERY SLOW STOP AND START TO WHAT I DO.

    THE WINDOWS BAR GOING ALONG AT LEAST 15 - 20 TIMES TO HELP START!

    Hello

    Maybe you've connected to some external devices to slow down the start-up procedure. You can also try to disable all the hardware components you n t need (modem. IrDA). Also check out which device is defined in a first start time (I hope that the HARD drive).

    For slow closing is responsible only running processes that should be forced disconnected. It all depends on your own configuration and you are using external devices.

  • Satellite M30x - BSOD at startup - F8 does nothing

    After loading some software my m30x keeps restarting itself.
    Unfortunately, the blue screen of death happens before I choose my account (XP) and it goes through the reboot sequence.

    Screen says to press F8 on startup to enter safe mode, but that doesn't matter.

    How can I get in mode start safe and no idea on how to solve this - if I can load XP so that I can perform a restore, but that seems very far at present.

    Thank you

    Hello

    Usually if the Advanced Boot Menu does not start pressing the F8 key then you will not be able to boot into safe mode.

    In your case I n t see any other solution than starting from the Toshiba restore CD and reinstall new OS :(

    Welcomes the MAN

Maybe you are looking for

  • Function keys: does not work for M30X

    Hello I have Satellite M30E (brought in Oct 04). Past 3-4 months, my function keys stopped working. I'm not able to increase or decrease the brightness of the display which makes reading difficult. I took the laptop to the Toshiba service center, the

  • Satellite M30X windows 2000 installation problem

    I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a

  • Satellite A100 - weird way to start up!

    Have just inherited a Toshiba Satellite A100, which is very well apart from a strange fact. When I received it the battery was flat and so I rebooted it, although it was not brimming with ability it hold a charge for about an hour. However, what I fi

  • Library of 3D vision machine (3dmvl)

    Greetings. I was wondering if there is more information available on the library of 3d vision machine for LV? Link: 3dmvl for Labview. When will it be available? This will be an add-on free for Vision or a stand-alone library module pay? Thank you an

  • Opening a file wave without having to save it first?

    I can open & view PPS files & save them then if I want to.  I was also able to do this with wave files, but I must have turned off something, because now I have to first download it to a folder, & then open it from there, where before I could click &