Satellite A210 1AP - the screen does not turn

I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

Thank you
Nikola

Hi mate,

It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

So I think you should call the technicians still what is the current status.
But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

Tags: Toshiba

Similar Questions

  • My iPhone 4S is sensitive to my computer and turn on siri, however the screen does not turn

    I have an iphone 4S with the newest ios (as of December 4, 2015). It was connected to a laptop (not a mac) to recharge when the laptop and the phone have both froze. The laptop has rebooted while the phone was still plugged. The laptop is fine, but the phone never turned back. It is always sensitive when I plug it into the computer laptop and if I hold down the home button.

    • So far, I have tried holding down the home button and power for about 10-15 seconds.
    • Now I tried the power button down for 10 seconds
    • I had plugged into wall to charge for about 20 minutes.

    There was no change in the screen. I think it's maybe a problem with the screen, the phone was hot to the touch when the screen stopped working. Someone was playing a game on it at the time it was plugged into the laptop. I don't have a warranty of any kind on the phone.

    Would appreciate a help,

    Kind regards

    A worried user 4S

    I pressed power and the button "home" for about 20 seconds and the phone has rebooted and is back on again once.

  • HP ENVY: The screen does not turn when only keyboard

    Morning,

    My laptop turns (i.e. horizontal screen) when attached to the keyboard. However, when the keyboard disconntected screen only a portrait.

    This occurred only in the last days. Until the computer was perfect.

    Cannot find the screen rotation function, need assistance as soon as possible.

    Happy new year and thank you very much.

    RA

    To set the locking of autorotation of your Tablet:
    1. drag the right edge of the TouchPad or touch the screen to display the charms and then press
    Parameters.
    2. tap on the icon in the bottom right of the screen. Tap the autorotation lock icon to lock your current Tablet
    screen in place and to prevent rotation. The icon displays a lock symbol when the autorotation locking is
    active. To disable the locking of the autorotation, tap the autorotation again locking.

  • Satellite Pro C660D - screen does not turn

    I just got my Satellite Pro C660D back from repair (for a faulty fan), but the screen does not light when I start the laptop.

    She lights up on the front (and I can rotate the block number power sp that the keyboard works).
    Any ideas?

    I agree, I mean the laptop should work just fine after it has been fixed by ASP so I think that something was not right here and the technician must check this!

  • Satellite L300 - 1-5 - the screen does not work

    Recently, I encountered a problem with my laptop, the screen does not work.
    I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

    Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

    Anyone know what the problem with my laptop?

    Thank you, Tom

    Hey Buddy,

    > connect my laptop to an external monitor, so I did and the screen didn't work there either.
    This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

    I guess for now, you get only a screen empty and nothing happens on your laptop?

    In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

  • Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

    Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

    Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

    Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

    Now, I can't turn off the monitor, except by turning off the computer.

    Hi JDandGinger,

    I suggest you follow the provided article and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    If the problem still persists contact the manufacturer of the monitor for more help and information.

  • HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

    Hello!

    I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

    (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

    Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

    When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

    Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

    It will take a little while for the circuit drain the load on my battery but...

    Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

    Hello @GregPDesWHP,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how your laptop is not on, and I'd be happy to help you in this case!

    In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    I hope this helps!

    Concerning

  • I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

    I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

    I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

    I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!

  • Arm, wrist and the screen does not light.

    I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

    Hello

    It is a community of support based on the user.

    To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

    https://www.Apple.com/feedback/watch.html

  • How do synchronize you a phone if the screen does not work?

    How do synchronize you a phone if the screen does not work?

    Rstansbury wrote:

    How do synchronize you a phone if the screen does not work?

    You need solve the problem first otherwise you do not have.

  • Yoga Pro 2 - screen does not turn on new 8.1 Windows Installer

    Last week, I received my new Yoga 2 Pro and the rotation of the screen worked correctly.

    I decided to delete the partitions and install my own version of Windows 8.1.

    Since then, the rotation of the screen does not work. The screen rotation button does nothing and I do not have the "Enable automatic rotation" box in the screen resolution

    In my device manager, I have an error on 'Collection HID sensor' saying "this decice cannot start" (Code 10). Failed to initialize sensor collection HID descriptor. I don't know if this is related.

    Can someone help me?

    Thank you

    I was able to solve my problem and would like to share the solution with others in case this happens to you too.

    I basically installed this package of media (http://www.microsoft.com/en-us/download/details.aspx?id=42503) and after that auto-rotation check button and work of suction works correctly.

    Hope that this can also contribute to others.

  • code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

    code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

    [Moved from the community centre of Participation]

    Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

    Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

  • Keys (Fn + F6 and F7) function to set the brightness of the screen does not work

    original title: Fn + F6 and F7 to adjust the brightness of the screen does not

    The function Fn + F6 or F7 has suddenly stopped working. It has been fine until now, but when I press on them now, nothing happens. I use a toshiba laptop with windows xp, can provide more information if necessary

    Thank you

    Hello

    1 have had any changes made to your computer before this problem?

    2. What is the number of the model of the computer?

    3. the other function keys work as should.

    Perform the steps mentioned below and check:

    Step 1:

    Check if the problem persists when the computer is in clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Make sure that you put the computer to Start Normal once you have finished by referring to step 7 in the article.

    Step 2:

    I suggest you perform the steps mentioned below and check if it helps:

    http://forums.Toshiba.com/T5/keyboards-touchpads/fn-key-not-working/TD-p/253131

    (Valid for all models of Toshiba laptops)

    If the problem persists I suggest you to contact Toshiba to get help:

    http://Toshiba.com/Tai/support.jsp

    Let us know if it helps.

  • When I click and drag a window to move its location on the screen does not move properly.

    When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

    original title: "leakage" of windows

    It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

  • just installed thinkpoint... now, the computer does not turn off

    Hello

    Downloaded thinkpoint... now the computer does not turn off

    never had this problem before.

    Hello

    Downloaded thinkpoint... now the computer does not turn off

    never had this problem before.

    ThinkPoint can be a virus, google for info also run superantispyware and av prog.

Maybe you are looking for

  • WMV files

    Is it possible to play wmv on safari or on a mac computer files without having to pay for the app?

  • Record event blocks LabVIEW if the event Type is not selected.

    Hi I think that found a possible bug in LV2011 SP1. -Thread a property node of event Reg on the dynamic event record Terminal of a structure of event -Add a case to the event -Click on the dynamic event -LV accidents The source code included, try add

  • I repeatedly get update error...

    I am running Windows 7 on a HP Pavilion laptop... I can't update my software driver (HP advisor resets without having to install), my mozilla firefox (seems to think there are other versions of the open program) and I can not install the next update

  • What is a free screen recorder well let's you zoom in on certain parts of the screen?

    Free screen with Zoom recorder What is a free screen recorder well let's you zoom in on certain parts of the screen?

  • RV180W of WLAN traffic is not routed to WAN

    My WIFI traffic is not routed to WAN. I can access LAN and plug to NIR all on the local network. But internet access is not possible. WAN LAN access is allowed. I have reset the RV180w to factory settings and also reflashed the firmware to make sure.