Satellite A105-S2021: Sound had disappeared after the installation of Norton Antivirus

Similar Questions

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• All the data disappeared after the installation of updates! Help!

  Hoping someone can help with this
  Last night I installed updates KB961371, 973346 KB and KB 890830 for Vista Home Premium and they seemed to have been settled... my computer turns off fine. But when I started today and connected to my usual user, I got a pop-up message from the tool bar by saying "your user profile was not loaded correctly, you have been logged on with a temporary profile, cnanges do you will be lost when you log out." Check the log of the events for more information or contact your administrator." I then found that all my data was away from all my files (music, photos, Documents, analyses)... everything was gone. I then logged out of my user every day and in my admin to have a snoop around and all the data disappeared from there too. While in admin I also looked in the update section to see if the updates have not been installed correctly, but he said that they had been installed successfully.

  I then rebooted, as I thought that it might help, but everything remained the same.

  After the reboot, I clicked through 'my computer' and hard the news here on the disc wrote I have 89 GB of 147 GB free, which I think is consistent with the amount of data I have stored. This made me think that the data is always there somewhere, but I can't access it at all thanks to my user every day or my administrator.

  As far as I can see, all the programs that I installed myself (such as Skype, open office software for my printer hp) are all present, but some of the shortcuts are out of the office. Also, when opening, they "behave" as newly installed programs. for example: Open Office writer guide me through a license agreement and registration rather than simply open a new document, and also firefox behaved in a way similar "new". Also, on commissioning today (after the installation of update yesterday), the window "welcome center" popped up, as did a window asking to save the "synaptics pointing device.

  In short, the system "behaves like new", remembers none of my settings etc, but it is still a my programs installed and most of all, I can't access any of my data! I have a Toshiba Equium P200-178 (use vista Home premium service pack 1 32-bit), I use AVG anti virus (8.5) and Ad-aware software anti spyware. These are updated every day and I run scans on a regular basis (last analysis aware ad probably about a week ago) so I'm not sure it's associated virus.

  Ask yourself what is this "temporary profile" and how to return to my old and my data! Help, please! Thanks :)

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  Good luck with it.

  Mick Murphy - Microsoft partner

• Remote Desktop disappeared after the installation of SP1?

  my remote desktop option disappeared from "Remote Settings" after the installation of sp1 on windows 7
  What can be the problem and how can I solve this problem?
  There is no problems during installation of the service pack

  Click Start, type allow remote access, and then click this option to set up.

• Files in a folder disappeared after the installation of the software for Word color card.

  I have files in a folder that has disappeared from my office, I think it happened after the installation, I think it happened after the installation of the software for wordcard

  OT: I keep files in a folder that has disappeared from my office, I think it happened after the installation, I think it happened after the installation of the software for wordcard color

  Hello

  The problem occurs only with files on the desktop?

  Method 1
  I suggest you try the following steps:

  a. open the Recycle Bin on the desktop.
  b. If you find the folder you need, do a right-click on the file you need and click on restore.

  Method 2
  I suggest you try looking for the missing folder.

  Find a file or folder
  http://Windows.Microsoft.com/en-us/Windows7/find-a-file-or-folder

  Method 3
  I suggest you try the steps from the following link:

  Recover lost or deleted files
  http://Windows.Microsoft.com/en-us/Windows7/recover-lost-or-deleted-files

• Re: Satellite A660 - 11 M - Random freezing after the installation of recovery

  Hello

  I recently bought an A660 - 11 m, which I was happy for a few months and then it started to crash/freeze randomly in windows. I'd do something and then it just would freeze indefinitely, requiring a second 5 press the power button to turn it off manually. The fan and hard drives would continue to work if he did something, or they wouldn't be if I was not doing something at the time (this has happened four times). After that it's the only thing to do would be to reinstall the entire operating system by using the manufacturers recovery disk. The computer will then work fine for a few days or a few weeks (never more than 2 weeks) and it would be demanding full gel reinstall again. I had reinstall my programs every time but I stopped on the last 2 times and it made no difference.

  After that the computer crashed it would then refuse to boot into windows. It would be still stuck just at the moment where the sign of windows appears. I would like to know that he had crashed as the 4 colored dots appear. The computer would simply wants at this point, continually getting stuck there after the reboot of several manual. Once and only once it booted into windows on its own, but it took almost 30 minutes and the computer is very slow and unresponsive. The computer will sometimes start in safe mode, but it varies. I tried Startup Repair tool and all stages of system restore, but none of these work.

  I got to use Acronis true image10 and creating an image of the system which can then replace the whole computer in all 25mins. This saves me time, rather than wait 2 hours or whatever it is to reinstall the toshiba, but becomes quite ridiculous to have to keep re install every two weeks.

  I also tried to buy a stand-alone copy of windows 7 (while recording an image of the partition of toshiba in the case where I need) I think it might be due to all toshiba programs and other bits and pieces that are installed on the computer - it makes much faster startup, but the computer still crashes the same after awhile.

  I am sure its some ware conflicts or driver pretty hard, but I don't know what.

  Any help please!

  Rob

  Hi Rob,

  I m also do not know what exactly is the problem and I believe that no one here can say that just because it s just a user to user forum.

  Fact is that if you have already tried restore factory Toshiba recovery disc multiple times, it s not a software or driver issue because it s an image pre-tested by Toshiba.

  I guess it must be a hardware malfunction and therefore, you should contact a service provider for help. Guys can check your laptop and if it of under warranty, the repair is free.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Bootcamp disappeared after the installation of paragon

  Hello. I'm new to macbook, I use macbook pro in early 2011. He had installed bootcamp and yosemite. everything was going well until I installed the software paragon ntfs. and now the training camp has disappeared from the finder as a boot disk utility. It shows that in the utility disc, but with the wrong icon (greyed). and it cannot be mounted. Please help solve the problem. Thank you

  Here is the result of some commands that I found on this forum

  Last login: Wed Jan 20 01:20:03 on console

  Apples-MBP: ~ list of apple$ diskutil

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 320,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 284.2 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 35.0 GB disk0s4

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD * GB 283,8 disk1

  Logical volume on disk0s2

  9A000C40-B756-420F-81EB-E42E57FA371A

  Unencrypted

  Apples-MBP: ~ list of cs apple$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group AB46EB3E-5864-40E1-92E3-DE0C4C987BE9

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 284213174272 B (284.2 GB)

  Free space: 18907136 B (18.9 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 284213174272 B (284.2 GB)

  |

  +-> B14C36AD-1EFB-47A1-9FAD-D235D1DF61E6 family of Logical Volume

  ----------------------------------------------------------

  Encryption status: unlocked

  Encryption type: no

  The conversion status: NoConversion

  Direction of conversion: - none -.

  At encrypted extensions: No.

  Fully secure: No.

  Password required: No.

  |

  +--> Logical Volume 9A000C40-B756-420F-81EB-E42E57FA371A

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 283841945600 B (283,8 GB)

  Conversion progress: - none -.

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Apples-MBP: ~ apple$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 320072933376; SectorSize = 512; blocks = 625142448

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 625142447

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 555103856 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  555513496 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  556783032 584

  556783616 68358144 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  655 625141760

  625142415 32 table dry GPT

  625142447 1 dry GPT header

  Apples-MBP: ~ apple$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 38913/255/63 [625142448 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639]

  2: AF 25 127 15 - 1023 254 63 [409640-555103856] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [555513496-1269536]

  * 04:07 1023 254 63-1023 254 63 [556783616-68358144] HPFS/QNX / TO THE

  Apples-MBP: ~ $ sudo dd to apple if = / dev/rdisk0s4 account = 1 2 >/dev/null | -c hexdump

  0000000?   220 N R T F S \0 002 \b \0 \0

  0000010 \0 \0 \0 \0 \0?  \0  \0   ?  \0   ?  \0  \0   ?   /   !

  0000020 \0 \0 \0 \0 200 200 \0 \0? \0 \0 \0 \0 017 023 004

  \0 \0 \0 \0 \0 \0 \0 0000030 \0 \0 \f \0 \0 \0 \0 \0 002

  0000040?  001 \0 \0 \0 \0 \0 \0?   ?   0 222?   0 222.

  \0 \0 \0 \0 0000050?   3   ? 216?   ?  \0   |   ?   h   ?  \a

  0000060 037 036 h f \0? 210 026 016 f 201 > 003 N \0 \0

  0000070 T u F S 025?   A   ?   ?   U   ? 023 r \f 201?

  0000080 U?   u 006?   ? \0 u 001 003?   ?  \0 036 203?

  0000090 030 h 032 \0?   H 212 026 016 213 \0? 026 037? 023

  00000a 0 237 203? 030 r 236 037 x?   ; 006 \v \0 u?   ?

  00000b 0 017 \0?   . 017 004 036 Z 3 \0?   ?  \0       +   ?

  00000c 0 f? 006 021 003 026 017 216 \0 \0?   ? 006 026 \0?

  00000d 0 K \0?   w   ?   ?  \0   ?   ? 032 f #?   u   -

  00000e0 f 201?   T C P A u $201? 002 001 r 036 026

  00000f0: \a? 026 h R 021 026 h \t \0 f S f S f

  0000100 U h 026 026 026? 001 f a \a 016? 3 032?   ?

  0000110 023 \n?   ?  \f   ?   ?   ?   ?   ? 001 220 220 f ' 036

  0000120 006 f? 021 f 003 006 034 036 f h \0 \0 \0 \0 \0

  0000130 f P 006 S h 001: 020 \0 \0 \0?   B 212 026 016

  0000140 \0 026 037 213?   ? 023 f Y [Z f Y f Y 037]

  0000150 017 202 026 f \0? 006 021 003 026 017 216 \0 \0?   ?

  0000160 016 026 u \0?  \a 037 f one?   ?   ? 001?  \t \0

  0000170?   ? 001? 003 \0?   ?   ? 213?   ?<  \0  ="" t ="">

  0000180? 016?  \a  \0   ? 020?   ?   ?  \r \n a d I

  0000190 s k e r a d e r r o r o c

  00001 has 0 c u r r e d \0 \r \n B O O T M G R

  00001 b 0 i s c o m p r e s s e d \0 \r

  00001c 0 \n P r e s s C t r l + l t +.

  00001d 0 D e l t o r e s t a r t \r \n

  00001e0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0

  00001f0 \0 \0 \0 \0 \0 \0 212 001? 001? 001 \0 \0 U?

  0000200

  Apples-MBP: ~ apple$

• Windows Media Player Album Cover Art disappeared after the installation of 11 Explorer (Windows 7)

  A large part of my cover art of the album disappeared from Windows Media Player after installing Explorer 11 (using Windows 7). It's hundreds of albums and for art that was already present before installing Explorer 11. The number of albums is to manually replace the work a tedious task seriously.

  It's the same thing with the installation of Explorer 10, but less than albums, so I learned to live with it. But it's now on a ridiculous on the part of the library.

  Can someone tell me where the art is gone? And why?

  If there is a way to replace it without doing a search for each album with missing art?

  If she is still on my computer somewhere, but is no longer connected to the media player?

  Where the cover of the album art in general is maintained? I can not even understand this, using my computer or go to my account to backup Carbonite.

  Thanks for any help.

  Hi Jamie...

  Your album covers on album is in application data files and it will always be there. There is obviously a problem somewhere and it can be if you rebuild your library of wmp that the work will return. I guess you can still see the piece in the album files ok - Yes?

  First of all if I should run the Fix It tool and the sfc scanner - after that restart your pc and see if anything has changed. (The scannow sfc tool will report if there are errors, it cannot fix)

  Fix - download and run the tool for WMP (all problem areas)

  http://Support2.Microsoft.com/FixIt/?WA=wsignin1.0

  sfc scannow - follow the instructions here.

  http://support.Microsoft.com/kb/929833/en-us

  After making such a report and we will then rebuild your wmp library if necessary.

  Ric.

  Afterthought - memory I got a screenshot of the cache of art, so here it is. It is also a "hidden" folder (you can tell by the gray look), that's why you don't find it easily!

  

• Toshiba BDX2409KB - Netflix app has disappeared after the installation of the update

  Hi, help please. My blu Ray player did an automatic update and now my Netflix app disappeared! The model is BDX2409KB.

  Can any ideas on how I fix?

  Can you open the Cloud application / peripheral settings/device profile and you will see an ID that is displayed there. Could you please post this here ID?

• Satellite 1800-814 does not start after the installation of the software

  Hello
  If I pass on my old Satellite S1800-814, it seems to start correctly: it shows the symbol of "Toshiba", then "Windows XP loading", then the screen goes completely blank, followed by a black screen showing the cursor that I am able to move. The hard drive continues to hum as usual for a few seconds, but then begins to repeat a series of clicking noises, somewhat like a disk that is stuck. The boot process is not still engaged.

  Here's the context: I installed my (old) version of Avid Xpress Pro editing software on my Satellite 1800-814. I managed to install a newer version, even if it does not function effectively, where my attempt to install an older version more closely adapted to the processing speed and the size of the RAM 1800-814. I got the usual warning at the end of the installation program of Avid saying that Windows can be affected if I let the installation ends in letting the computer on. But I pressed the option "continue anyway" (as I've done it before without negative effects). The computer off, but he came in as described above. Please tell me what I broke. Can I ever solve this?

  Thanks for your help.

  Hello

  Try to start your computer in safe MODE and try to remove preinstalled software. Please report the results.

• THUMBNAILS VIDEO DISAPPEARED AFTER THE INSTALLATION OF REAL TIME

  After you have installed the latest version of "Real Time Player" which is an upgrade to 'Real Player of cloud', all the video thumbnails are not visible on a single computer. 'Real time' has been installed on two computers with almost identical Windows 7 Home Premium and processors within minutes of each other.  A computer kept all video thumbnails while the other did not. So far I have uninstalled and reinstalled in real time, uninstalled and reinstalled Real Cloud, but still no thumbnail previews. I also tried the verification of the method 'display only the photos '.  I'm looking for someone who's hands are successful on empirical knowledge for this question. Thank you.

  Stanley,

  Here's a recent update on my original investigation.

  After an upgrade of RealTimes Player RealPlayer Cloud download failed to produce thousands of miniature video generated by RealPlayer cloud, I immediately started looking for answers in this forum of Microsoft.

  I have two new computers HP here on my desk. A computer has received the RealTimes Player download and continued to display thumbnails. This is the second HP computer that the thumbnails are not visible.

  Several answers to this problem repeated the same methods. I tried these methods more than once and still no pictures. Then I took action on your message and another someone from Real.com contact Real.com. The only way to contact Real.com was by email on their website. I sent them an email describing the problem. Now, it's my experience that Real.com has even good tech support for free download of RealPlayer. Their first suggestions were identical to the information I received Microsoft community. Following is a concise list of end to end on how I solved the problem before Real.com phoned for help, which may have included access remotely:

  (1) download the RealTimes Player "new" (that's their latest version of RealPlayer cloud;) I know now I should have stayed with cloud of RealPlayer).

  (2) a computer downloaded without any problems, while the second computer lost all thumbnails.

  (3) I contact Microsoft Community to get answers.

  (4) community Microsoft sends answers, including and meet someone from Real.com.

  (5) none of the above gives a solution.

  (6) I am Real.com e-mail for a few days through their website with no solutions.

  (7) I have uninstall RealTimes Player on both computers.

  (7) I call the HP Technical Support to make a 'system restore' on computers.

  (8) after the "System Restore", I reinstall MSE, and all thumbnails are restored on the computer and three external hard drives. All thumbnails are Windows Media files. None of the hundreds of RealPlayer Cloud files can be opened.

  (9) Real.com offers to call me at one time that I choose, which may include remote access to my computer.

  (10) I answer Real.com Friday that a time to call will be the following Monday.

  (11) the following Monday at the appointed hour, Real.com has not called. I waited 30-40 minutes. While I was waiting, I've been on the Real.com site read comments in the section "RealPlayer/RealPlayerCloud. In a response from Real.com Tech to one of the speakers, they gave to this speaker a link to download RealPlayer Cloud. I took a chance with this link and downloaded RealPlayer Cloud in my computer, not only did the Windows Media thumbnails remain, but I was able to play all audio Real Player and video files, and the "Download this video" button a drop down of RealPlayer has been restored. I turned so my attention on the other computer, clicked on a download link that says Cloud RealPlayer on Real.com Web site, and when the download is complete, it was the new RealTimes Player again, not RealPlayer Cloud. But, all right. All thumbnails are back in this computer while being able to play all Real Player files. Now, a computer has the 'new' RealTimes Player and the other has the original cloud of RealPlayer.

  (12) after all this was over, and two computers were back to normal, the representative of Real.com called (almost two hours late; he was on another call that lasted longer than normal). I explained that while you wait for him to call, I reinstalled Real Player on both computers and everything was back to normal. I mentioned reinstalling RealPlayer cloud on the other computer and it recommended that all was well under way, for whatever. I agree with you.

  (13) since the call of the representative, Real.com has sent me a couple of times and told me they were happy that the problem has been resolved and do not hesitate to contact them for any future problems. I asked for a download link for RealPlayer cloud which they sent a warning that they were not certain if the link has an expiration date, but to contact them for any problems or questions.

  (14) although I have Google Chrome on a single computer, all my audio/video download through RealPlayer Cloud/RealTimes drive is via Internet Explorer, not Google Chrome. I prefer the drop-down menu "Download this video" button at the edge of the screen in Internet Archive rather than the barely visible button at the top to the center of the page in Google Chrome.

  Microsoft 15 community) thanks and Real.com.

  (16) a lesson learned. When everything works fine, why switch?

      

   

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• Partition Windows 10 disappeared after the installation of El Capitan

  @Loner T - seems you have helped others on this question and hope you can help me through it too.  I have a MBP early in 2013 with a 500 GB SSD.  I allowed the upgrade to El Capitan, and like others, this is the boot camp partition disappear.   Holding the option key pressed when starting displays only the ability to boot into OS X.  Here's what I've done so far:

  -SIP is disabled.  Confirmed after restarting normally by typing csrutil status

  -Tried to do the other bootable partition using your instructions on

  -fdisk/dev/disk0-e

  -Pei

  -setpid 4

  -07

  -Pavilion 4

  -Pei

  -w

  -y

  After resigning, I restarted and press option.  Windows now appears when I press and hold option, but when selecting it I get the error "Missing Operating System".

  Here is the result of all other orders:

  diskutil list gives:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 300.0 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database 101,0 GB disk0s4

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 299,6 disk1

  Logical volume on disk0s2

  DAED883D-1E3E-48A7-A986-A2C2E5483BE7

  Unencrypted

  CS-diskutil list displays

  

  TPG - vv - r see the/dev/disk0 poster:

  

  sudo fdisk/dev/disk0 gives:

  
  

  
  

  I think all this means I have a lost partition as you described to others.  I downloaded Testdisk and gdisk.  Output of TestDisk:

  

  Run a quick scan on drive Test and see these unrecoverable partitions (stupid question this mean that they are lost for good or they are good and that they need not be recovered?) 。

  

  Prosecutor:

  

  Product selection P here:

  

  These are the values that I can use in steps 7 and 8 in this post?

  
  

  Step 7-587618304

  Step 8- + 388564992

  In the first series of markets Gdisk. The second set of rebuild MBR is the same for a standard installation of BC.

• No sound in Windows after the installation of Windows XP.

  Original title: Windows Audio recording

  I just reinstalled windows xp on my computer but have no sound from speakers. I had sound before you install windows xp but now do not have anyone can help me please

  Hello

  I suggest you to follow the steps in this article and check if it helps.

  No sound in Windows

• files disappeared after the installation of sierra. How can I restore them?

  My documents directory is empty after installation of Sierra.  In a terminal ~/Documents ls displays nothing, however, in Microsoft Excel, the documents are displayed in the same directory.

  In the Finder, if you use the menu go to show Documents, it works?

  If does not show as always, what do you see with ls - al ~/Documents