Satellite A110-203: graphics memory only to 64 MB after BIOS update

Similar Questions

• Satellite A200-AH6: Error Message: System CMOS checksum bad after BIOS update

  I've updated my laptop Satellite A200 - AH6 PSAE0C (Bios and graphic update) after the installation of Toshiba Power Saver.
  I downloaded the update of the BIOS on the Site of Toshiba and flashed my BIOS.

  After reboot and all start/stop that I do now, I get a black screen (splash screen) with these details listed thus:

  Updated System Configuration data
  ERROR
  0271: check date and time
  WARNING
  0251: System CMOS checksum bad - default configuration used

  Can someone help me please?
  If anything, I would just restore my old BIOS, if possible.

  Please, someone help!

  Hello

  Have you tried to access the BIOS and tried to set it to default settings?
  Isn't it? Do this!

  By pressing the F2 key, you would be able to access the BIOS. Set the BIOS back to default settings and set up.
  Then start the laptop again and check if the same notification will appear on the screen.

  Welcome them

• Satellite C660-1NR - lost the use of FN buttons after Bios Update

  Re: C660-1NR

  I lost the use of the function (FN) key.
  Have recently updated the BIOS with the latest version about 2 weeks ago, I did notice something wrong, until I tried to deactivate wireless last week.

  Does anyone know what has caused this?

  Hello

  Have you noticed any problems with all FN keys or only with the special combination FN + F8, which turns on and the WiFi network?

  Usually controls utility Support Toshiba Flash Cards, the FN buttons if you can try to restart this tool that you can find in all programs Toshiba-> restart Flash Cards

• Satellite P200 - 17 c: USB ports do not work after BIOS update

  Hello

  Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.

  Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)

  I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.

  Any info or advice would be great.

  See you soon.

  Glad you ve found a solution and thank you for sharing this with us

• Satellite X 200-20 s - LAN does not work after BIOS update

  Hi all

  I've updated the BIOS version 2.7 and NIC LAN just disappeared from my list of device. The wireless network card works fine however. When I plug the ethernet cable, the green light turns orange not, so I guess that it is not broken, as it worked fine before the BIOS update.

  I tried different drivers lan Windows XP and still nothing. Any ideas please?

  I have Windows 7 x 64 installed.

  LAN option is listed in the BIOS boot menu?

  If you have tested with Win7 and WXP maybe you should do finally test and install recovery image original Toshiba that you got with your laptop and see what happen when you use the laptop with the factory settings.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Satellite A110-160: graphics card shows a maximum 64 MB instead of 128 MB

  I have a Satellite - A110-160 and recently I update my bios to 1.60v... my graphics card now shows a maximum of 64 MB instead of 128 MB... anyone having the same problem? his bad toshiba doenst previous bios support for download, I assume that evil must wait for the next update... can anyone tell me how many times we get these updates to the BIOS?

  The Intel 945GM graphics card, which was built in supports shared 8 MB to 128 MB memory.
  This memory on Intel adapters cannot be assigned manually but only automatically.
  If the program needs memory graphics card the BONE it assigned automatically up to 128 MB.

  Please check the value of memory still in control-> Intel graphic chipset-> information panel.
  Under memory graph max, you should see 128 MB

• How to increase dedicated on Satellite L870-136 graphics memory?

  I am trying to increase dedicated graphics memory allocation, and I read that I can do this if the BIOS, but I have absolutely no idea how access.

  Any help would be appreciated.
  Thank you

  To be honest I m not sure that you can do, but when you start your laptop press F2 repeatedly and you should be able to enter the BIOS settings.

• Satellite C55-A-16Z - graphics card does not work after BIOS update

  Hello

  I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

  Last week he asked me to update the version of the bios at 1.30.
  The bios update was successful.

  However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
  Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
  But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

  In the settings Nvidia dedicated card is configured to be always on.
  It seems that my card is missing, but it appears in Device Manager.
  I tried to delete, update the drivers and the default factory reset, but nothing helped.

  Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

  How can I get my Nvidia card to work again?
  Any help is appreciated.

  Thanks in advance.

  Hello

  After the BIOS update the BIOS should be set to default settings.
  You can do it in the BIOS.

  In addition, you mentioned that Windows 8 is still installed on your laptop.
  8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

  Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba: http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

  Your comments would be greatly appreciated.

• Satellite A110 (PSAB0) running hot after BIOS update

  I've updated the BIOS on my Satellite A110 (PSAB0) to the latest version and now the laptop works warm - fan runs continuously and the battery runs out of full of emptiness in a few minutes.

  Y at - it a setting or an other update to address this problem or how to restore the old BIOS?
  I'm sure that I opted to save the old version during the update, but I can't find it on my laptop.

  Thanks for any help

  Have you tried to reset the BIOS to its default settings?

  Also try to update the Toshiba Power Saver and common Modules and make sure the power options are on dynamic processor to avoid the CPU to run at full speed all the time.

• Satellite A500 emit after bios update 1.50

  Hey guys and girls,

  I have some problems after the update of the bios. Before the update my laptop has been the scene of much smoother and everything was fine and dandy until Tempro told me to update my bios. The problem is that after the update, the temperature seems to be considerably higher as usual when I play the game (I am a gamer) and also all the games I play seems to be much slower than before (lower, gal frame rate). Before the update I could play Dragon Age Origins with 1366 x 768 with 4 x anti-aliasing and the only one that I could get the same performance with the graphic parameter above is on 800 x 600. Now, it is certainly a big problem for someone who is a graphics junkie when it comes to games.

  * What do you think I should do? *

  A. downgrade my bios for when I bought everything first? (I don't know what version of bios is if anyone knows the stock bios?)
  B. perform HARD drive recovery?
  C. clean install of Windows 7 64-bit?

  My laptop computer spec:

  Model name: Satellite A500
  Part number: PSAR3E-00N005EN
  Serial number: X9206227K
  OS version: Windows 7 64-bit Home Premium edition
  BIOS version: 1.50
  Physical memory: 4096MB RAM
  Graphics card: NVIDIA Geforce GT 230 M

  Any help with this is greatly appreciated.

  Post edited by: Poyzen

  Hi mate

  I think you had a version of BIOS 1.30
  In older versions of the BIOS update are not available on the Toshiba driver download page. Only ASP (partner) has access to these early BIOS versions

  In any case, I found an interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577

  Not sure if it could be useful but check

  PS; the graphics card driver update is a good idea it too check

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Satellite C855 - white screen after BIOS update

  Hello

  I am a beginner user,
  I have Satellite C855
  Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
  Since that my screen is blank, there is a hum in the background.

  I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

  I think I must have downloaded a model or the update was not compatible.

  Hello

  White screen do you mean that nothing appears on the screen?
  You see the start screen of Toshiba, or if you are able to access the BIOS?

  Where this is not possible, try this:
  Disconnect the power adapter, remove the battery.
  Press and hold the power button for about 30 seconds.
  Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

  In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.

• Satellite C650 - black screen after BIOS update

  My Satellite C650 Windows 7 - won't start afte BIOS update / switch.

  Everything worked very well until the automatic update of Toshiba asked me to download and install the new BIOS update, I did. At the same session Windows and McAfee asked updated. I agreed to all. After all updates have been installed, turns off. The next day when I walk, I see only black screen. I also tried F2, F12 and drive recovery. Nothing happens!

  Any recommendation?

  Hey,.

  It seems that something was wrong during the update of the BIOS and so that you can t the computer unbootable. But I put t understand why you did the BIOS update. If everything works correctly, you can forget about this update. More if you do a BIOS update you shouldn't t run any other updates or programs that might affect the update of the BIOS.

  Anyway, in this case you can do nothing and you need professional help. Please contact an authorized service provider and guys can help you update the ROM module On the Web from Toshiba site, you can find a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)