Satellite C660-1NR - lost the use of FN buttons after Bios Update

Similar Questions

• Satellite C55-A-16Z - graphics card does not work after BIOS update

  Hello

  I have a portable Satellite C55-A-16Z with windows 8 and a Nvidia geforce 740M graphics card.

  Last week he asked me to update the version of the bios at 1.30.
  The bios update was successful.

  However when I restarted my laptop I started having a BSOD dgxkrnl.sys.
  Correction of the error and restarted for an another BSOD Windows, and after the second solution, I stopped making BSOD.
  But now, I noticed its games running, if not use the dedicated card, but use the 4000 Intel.

  In the settings Nvidia dedicated card is configured to be always on.
  It seems that my card is missing, but it appears in Device Manager.
  I tried to delete, update the drivers and the default factory reset, but nothing helped.

  Also, when I go into Options power the Intel card is listed and when I disable the card intel in the Device Manager it starts to use the graphic viewer for windows.

  How can I get my Nvidia card to work again?
  Any help is appreciated.

  Thanks in advance.

  Hello

  After the BIOS update the BIOS should be set to default settings.
  You can do it in the BIOS.

  In addition, you mentioned that Windows 8 is still installed on your laptop.
  8.1 to win has already been published by Microsoft and I highly recommend that update you the system of 8 to 8.1 Win Win.

  Before you start the upgrade to 8.1 win, you should check and read the instructions step by step for Toshiba: http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I guess that after the Win 8.1, nVidia graphics card upgrade works well also.

  Your comments would be greatly appreciated.

• Satellite X 200-20 s - LAN does not work after BIOS update

  Hi all

  I've updated the BIOS version 2.7 and NIC LAN just disappeared from my list of device. The wireless network card works fine however. When I plug the ethernet cable, the green light turns orange not, so I guess that it is not broken, as it worked fine before the BIOS update.

  I tried different drivers lan Windows XP and still nothing. Any ideas please?

  I have Windows 7 x 64 installed.

  LAN option is listed in the BIOS boot menu?

  If you have tested with Win7 and WXP maybe you should do finally test and install recovery image original Toshiba that you got with your laptop and see what happen when you use the laptop with the factory settings.

• Re: NB520 - buttons on the touchpad does not work after BIOS update

  Got my NB520 yesterday and installed all windows updates, and then the BIOS updates proposed by the action center of Toshiba and after that the two touchpad buttons have stopped working.

  They did before. Any ideas whats happened, this is the update of the BIOS?

  I put t know if its the related issue of the BIOS, but if there is no way to get buttons working again I recommend you reinstall the OS using the recovery mode. Test the functionality of buttons with the factory settings.

  By the way: touchpad works properly?
  You can use an external mouse correctly?
  Have you checked all the settings of the touchpad?

• Satellite A200-AH6: Error Message: System CMOS checksum bad after BIOS update

  I've updated my laptop Satellite A200 - AH6 PSAE0C (Bios and graphic update) after the installation of Toshiba Power Saver.
  I downloaded the update of the BIOS on the Site of Toshiba and flashed my BIOS.

  After reboot and all start/stop that I do now, I get a black screen (splash screen) with these details listed thus:

  Updated System Configuration data
  ERROR
  0271: check date and time
  WARNING
  0251: System CMOS checksum bad - default configuration used

  Can someone help me please?
  If anything, I would just restore my old BIOS, if possible.

  Please, someone help!

  Hello

  Have you tried to access the BIOS and tried to set it to default settings?
  Isn't it? Do this!

  By pressing the F2 key, you would be able to access the BIOS. Set the BIOS back to default settings and set up.
  Then start the laptop again and check if the same notification will appear on the screen.

  Welcome them

• Satellite P200 - 17 c: USB ports do not work after BIOS update

  Hello

  Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.

  Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)

  I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.

  Any info or advice would be great.

  See you soon.

  Glad you ve found a solution and thank you for sharing this with us

• Satellite A110-203: graphics memory only to 64 MB after BIOS update

  Hello

  I have a Satellite 110-203 my aunt.
  Once for the period that I have updated the Bios to ver 2.0 running my old old 1.7 and I know not is all wrong so now it's just to receive 64 m VGA in the Direct X diagnostic tool, before it was 128 MB.

  Sometimes the screen is flashed that I've not met before. I check the file log and it show:
  New BIOS loading image file...

  Open the D:\winphlash\V0.05.1\Source\BIOS.rom file...
  Error code: 2(0x00000002)
  Description:
  Error code: 2

  Y does it can someone help me to deal with this problem or history for the old bios. I appreciate any idea of activity

  Thanks in advance

  First the video RAM size can t be replaced. It will be controlled automatically.
  And as Akuma said the video RAM size depends on the size of the RAM, so if you have more RAM you will get also more video RAM.

  For Windows is sufficient video 64 MB RAM.

• NB100 - lost the use of the mouse

  Hi all
  First post (Please be nice...).

  I work for a college in Nottingham, UK. We ordered and received 50 x NB100. At arrival we have returned to image drives in XP Home, XP Pro (as is the standard operating system for all facilities of the College). Things were fine until the last two days when 2 NB-100 have suddenly lost the use of the mouse pad.

  They work very well with an external mouse. They were outside the internal IT Department, and they seem to think they are well broken. I don't think they are as if it is 2 I guess it may be a driver/software problem?

  All advice welcome...

  Alex

  Hi Alex,

  I assume you mean the touchpad rather mousepad? The mouse pad has nothing to do with the laptop, it can easily be replaced by another =)

  Anyway, if an external mouse works, you must press FN + F9 key combination. With this combination the touchpad can be turned on/off.
  Check this box!

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• lost the "switch between windows" button on the Quick Launch toolbar

  Hi, I lost the "switch between windows" button of the toolbar quick launch, how can I restore it?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dasepo salvation,

  Here are the instructions for the program shortcut "switch between windows" returned the fell on the Quick Launch toolbar:

  First of all, make sure you that you must show hidden files and folders active. Here's how:

  Go to: Start/Control Panel folder Options/configuration and select the 'view' tab select "Show hidden folders and files under the section files and folders hidden from advanced settings".

  Then you can get the file from quicklaunch default section. This location of file is here:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  You can paste this link into the search bar (Ctrl-Esc). When you get to this place, you will find the 'switch between client.lnk' which you can then drag directly to the Windows Orb and it going bust in the Quick Launch bar.

  Hope this helps,

  Steve <> Microsoft Partner

• I lost the license for Photoshop and After Effects when updating to CC, 2015

  When I updated all of my applications to 2015 CC, I lost the license for Photoshop and After Effects. All my other apps are not affected. I tried following the instructions here: Creative Cloud applications unexpectedly back in the test mode. CS6, CCM but it still says that there is no license associated with my account.  I'm running OS X version 10.9.5 and I version the full creative cloud student. What else could I do to retrieve my apps? Thank you.

  Christina I would advise you to Contact Customer Services and report this issue and they will be able to help you accordingly.

• Satellite A110-275: more a low-memory graphics card after BIOS 1.30 update

  Hello

  I am the owner of:
  Satellite A110-275
  Part number: PSAB0E-00T00TEN
  graphics card intel gma 945 up to 128 MB.

  Recently, I updated the bios of 1.20 to 1.30 and after reboot, I lost 64 megabytes of 'graphics card capabilities.
  After bios update, my computer is much lower. Why? How can one get 128 MB of memory on my intel gma 945?

  also s it is possible to manually change a file and configure gma 945 capacities up to 256 MB? I have a lot of ram and I could use it for games, now I can use only 8 to 64 MB.

  Concerning
  Piter

  Hello Pit

  I posted my opinion that I don't think there could be a problem in your second topic.
  As far as I know the laptop came with graphics card Intel shared memory. 8-128 MB of memory could be chosen.

  To my knowledge the Intel driver graphics card automatically controls the value of memory sheared. If need more than MB of graphics card memory so it will be assigned automatically.

  PS: In my opinion it is not possible to select 256 MB because the hardware does not support.

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• Cannot see the preview of my photos taken with the Sony A7R II even after software update.

  Even after the the Lightroom update, I still don't see the preview of my photos taken with the Sony A7R II even after software update. Need help please.

  

  Hi Joas,

  Sony A7R II files are not supported in Lightroom 5.

  You need at least version 6.1.1 or CC2015.1.1 to access these files: supported by Adobe Camera Raw devices

  You can upgrade your program of Lightroom or Adobe DNG Converter allows you to convert raw files to DNG and import them into Lightroom.

  Kind regards

  Claes