Satellite A110 stop suddenly - processor fan does not work

Similar Questions

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• Satellite L505 - 10 X cooling fan does not work

  Dear friends, good computer Toshiba Satellite L505 - 10 X Day.My laptop cooling fan does not work. The CPU temperature is not displayed in the application of PC health Monitor. Kindly guide me to solve this problem, cordially, Siva

  Simply because the temperature is not mentioned in the Toshiba Health Monitor, it doesn't mean, that the cooling fan is not working properly.

  You can hear fan running cooling?
  The laptop is turned off unexpectedly?

  In my opinion if the cooling fan would not properly work, internal temperature should rise very quickly at a critical level... in this case that the laptop must close automatically...

  But if the device does not turn off and if you are still able to use it properly, so I doubt that there is a problem with the cooling module.

• Satellite P105 - GPU overheating as fan does not work

  I brought a Satellite P105 - S9337 laptop computer around a year ago and it's been great, but I had a problem that began a few months ago. The GPU fan does not run under windows or any OS. It works correctly in the BIOS, but when I hit the operating system, it will stop. This is obviously the cause for overhead.

  -J' tried different drivers of Toshiba and other sources. Currently using 7.15.11.5666 which was the last version of Toshiba.
  -Tried all BIOS and running 4.40.
  -Cleaned it if sure there is no dust blocking the fan wheel.
  -I even sent to Toshiba for repair 4 times and it comes back with the same question.

  It's as if the fan control is equal to change the operating system when it reaches him like bios and basic OS (dos, the flash media bootable back past) works very well. It runs when she is hot and stops when it is ok.

  At the moment that I leat overheating for a while then he seems to remember he's a fan after 30 minutes or more and comes into play. It works on OS at full speed, until my laptop loses power or I unplug battery, that I did today to increase the RAM.

  There must be some drivers or BIOS out there that allows the BIOS to manage the fan or it just as it manages itself is so it doesn't overhead. I'm not pleading can someone help me with what it's getting very boring. e-mail is [[email protected]] If you want to contact me, because I'm out of ideas.

  If I can't get this resolved I'm thinking of dismantling and wiring of the fan on but would prefer to avoid that for now.

  My laptop (P100-481) was overheating too since I have updated BIOS 4.20 and above all. The latest version of the BIOS with work-fan control was 4.00.

  There are two ways to set the fan control:

  1 go to BIOS 4.00. You'll get stuttering in games because the initialization of GPU in the form of Versions all 3.30 to 4.00 are buggy.

  2. you can try this way: [http://www.laptopvideo2go.com/forum/index.php?s=679696d192a1f43137253716ebd799b8&showt = 19190 CIPO & view = findpost & p = 79039]

  It's not easy install a double Windows, but it worked for me.

  There is a bug in the BIOS 4.20 4.30 and 4.40 and a lot of people have trouble with the GPU fan. So hopefully Toshiba find time to fix it in the near future.

• (Redirected) The DELL INSPIRON N5110 processor fan does not work

  Hello

  I encountered a real problem with the fan to the processor in my laptop, it does not work, and when I run the diagnostic tests, I get this:

  error code: 2000-0511

  MSG: the preocessorfan did not properly.

  have you encountered the same problem?

  What can I do in this case?

  Thanks in advance

  Best regards

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Satellite Pro 4200 overheating because the fan does not work

  I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

  Hello

  And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
  By the way: did you clean the unit and remove the dust?

• The CPU fan does not work on Satellite A60

  Hello world

  I have a little problem with my laptop.
  I noticed my cpu fan does not work. only the second fan are working fine. (general fan)

  my PC is a satellite A60
  You have a solution to find why my fan does not work?
  THX

  Hello

  I put t know what fan you mean because I saw only a single fan at the bottom of the unit. However, perhaps the second fan is hidden.
  It's not easy to say why the fan doesn't work. Maybe dust clog up the fan and cooling module may not work correctly. You can try to use the vacuum cleaner to clean the fan.
  If it doesn t work so I guess there must be something wrong with the material and to fix this, replace this part. But in this case I recommend to contact the after-sales Service of Toshiba partner. He has much more experience in such cases.

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• My HP laptop cooling fan does not work.

  Okay, so. I have a HP Pavilion 1145sg g6. It worked fine all morning, and then I put sleep temporarily (about ten to twenty minutes). When I went to turn it on, the screen was black and he said something along the lines of

  "the system has detected that a cooling fan does not work correctly. Suite operation is not recommended at this time... may result in unpredictable behavior that may result closed random, loss of data or damage the system as possible. »

  Then after a few seconds it stops completely. There is an option to continue with the summary of the system and I clicked once on it, but she didn't go through completely for allowing me to use my laptop properly (I arrived at my wallpaper and it stopped).

  This has never happened before, and I never had any problem with my laptop, like this before. I have had him since last August, and it worked pretty well through until today. Of course, the system sometimes, accused but nothing serious, for the most part just aggravating.

  How can I fix?

  Someone said here that they stung the fan with a hairpin and it started working. I took a toothpick and switched my laptop and tried to move the fan and the fan started WALLA on! I noticed that a lot of dust in there and that's probably the culprit first event hough I keep this laptop clean every day, this darn dust is sneaky and small. If you use a toothpick, make sure not to break anything especially the toothpick. last thing you want to do is cause more harm. Now that I think I don't remember when the last fan worked and if it wasn't for the message that popped up today I would not of the same notice I wasn't to hear the fan because last week I said "wow is not the substance of this portable super hot feeling", but I just thought that my fiance was simply playing games on the computer for too long and that's why he was hot. He never closes the computer off smh. in any case, I'm very happy I read this post of a person using the PIN to hair. That's what forums are all about. Help each other. I hope it works for you. Be gentle, try pushing the way fan propellers in clockwise. Use a flashlight to see if dust or anything like that is by the way to allow the fan to run its on.  I blew in the vents, but it did have almost all of the dust of the road.  All of these messages, it seems this is a common problem. Good luck

• My HP Pavilion g6 fan does not work.

  I bought a HP Pavilion g6 2230tx a few months back and its cooling fan has stopped working.
  It was working fine, but the problem started when I played Euro Truck Simulator 2 full settings. The cooling fan has been throwing a large amount of heat and the fan was moving quickly, but I continued to play. Later that day, when I turned on my laptop, it showed an error which was: "the system has detected that a cooling fan does not work correctly and continued operation can cause damage.
  Fan system (90 b)'.
  Then I turns off after 15 seconds.
  My laptop is under warranty until 2016-06-16 [YYYY-MM-DD] and the Security category is "guarantee of the factory." {Deleted personal information} & product number is C9L64PA #ACJ. Now my question is that how much HP will take to repair or replace my laptop fan. Will it be free? ;-)
  And I live in India.
  Thanks in advance
  Aniket Chauhan

  Dear Hüffer
  I tried what you say except clean it with compressed air and a paperclip. I'm going to send my laptop for repair and now I hope they'll work again.
  Concerning
  Aniket Chauhan

• "cooling fan does not work correctly.

  Product name: HP Pavilion dv6 Notebook PC

  Product number: LZ801PA #ACJ

  Operating system: Windows 7 64-bit

  Erroe message:

  "The system has detected a cooling fan does not work correctly. . Continued operation is not recommended and can result in unpredictable behavior that may cause stop randomly, loss of data or damage the system as possible. The system will stop in 15 seconds. To prevent stop and continue the operation please press enter now. »

  OK, now, I cleaned compressed air fan can now issue is completely resolved and my laptop is like as it should. I ask to do something else?
  I mean I don't want my internal parts of the laptop to be defective.

  http://compareindia.in.com/specification/laptops/HP-Pavilion-dv66115tx-lz801pa/238232

  Try a hard reset as follows:

  (1) remove the battery and unplug the DC power adapter.
  (2) press and hold the power button for more than 15 seconds.
  (3) plug the DC power adapter (leave the battery for now)
  4) press the power button
  
  Please post here your positives or negatives in your thread.

  Best regards
  ERICO

• Pavilion g7-1368dx "cooling fan does not work correctly.

  Greetings. I have a HP Pavilion g7-1368dx laptop with Windows 7 I bought in June 2012, is no longer under warranty.

  A few weeks ago he had a thermal cut-out once during use. After cooling, the laptop works very well for a few uses, but then it has started giving the boot warning message, "the system has detected that a cooling fan is not working properly," with an additional indication of the damage if the computer is used in this State.

  I ordered a new fan and succeeded him, and I cleaned the fan grille in the process (although it wasn't very dirty), but I still get the same fan error message. I went to the HP website and saw the suggestion to do a "hard reset", so I did it, but the problem persists.

  I saw another suggestion to try a BIOS update, but I thought that would not be desirable because the fan does not work. Suggest you go through with the attempt to update the BIOS anyway?

  Is there something else I can try before ordering a new card system?

  Thanks for your help.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you are having difficulties with regard to your laptop cooling fan
  We will surely help you with this

  According to the message that you have posted, I suspect that it is purely a matter of material where in your message 'System Fan(90B) - the system has detected that a cooling fan does not work properly' get. It is a mechanical failure and fan cooling of your laptop and must be replaced before the laptop starts with an overheating problem.

  Causes/reasons for this problem:

  1. sometimes, it's just because of the dust, animal pet hair slows down the fan

  Perform the illustrious below troubleshooting steps:

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 to load the default Installer for BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now please wait unit loads Windows and then stop the Netbook again

  Step 09. You need to clean all vents and openings that are really good with a can of compressed air

  Note: If you still get the same error, we need to replace the fan

  I highly recommend you Contact HP technical support immediately by phone to get help immediately to get your fan replaced and serviced by an authorized HP Certified Engineer Netbook

  Click on the link to check the status of warranty below
  http://tinyurl.com/6cf8qju

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?