Satellite A200-1 to 9 - not possible to read the 2 GB SD card

Similar Questions

• Log in failure: the user profile Service failed to connect. It is not possible to read the profile of the user.

  Hello
  Trying to create a standard account on a new Windows 7 computer but can not connect. The message with my Swedish translation is: user profile Service failed to connect. It is not possible to read the profile of the user.
  Can someone advice me?

  Hi Lagun,
   
  Step 1:
   
  I suggest you to follow this link below and check if this solves the problem.
   
  Now search for the question.
   
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  See also:
   
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215
   
  Important: the above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  Step 2:
   
  If you need assistance in Swedish, below the URL provided will help you receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.
   
  http://support.microsoft.com/common/international.aspx.
  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Satellite A200 - Firmware update is not possible

  Hello

  Toshiba Tempro (version v.2.3) informs me that a firmware update is available. He directs me to
  http://nl.computers.Toshiba-Europe.com/innovation/download_driver_details.jsp?id=62091&OSID=-1&driverLanguage=42&source=tempo&LNG=3

  The Satellite A200 (which I own) is mentioned in the supported products. When I download and extract the file (frmwre - 20080422163939.zip) and then try to open TS - L632H_TO02.exe, an error message is displayed:
  "This Firmware is not compatible with the selected drive.
  Contact your system manufacturer for more information on the firmware updates available for this drive".

  Is the message of defective tempro, the wrong file was broadcast on your download server, or maybe it's something that bad?

  Hey,.

  What CD/DVD drive you have? Maybe it is not compatible s, this could be possible, Yes.

  But if your engine is working properly, you can forget about this update. I would like to only do a firmware update if it of necessary.

• Satellite A200-27R - second HARD drive possible?

  Hi all, just wanted to know if its possible to buy a drive hard cady to adapt to a slave hdd in the Bay of spare? [SATELLITE A200 27R]

  If not can anyone tell me what its for. Thank you and
  All the best Dave

  Hey Buddy,

  The question is: do you have a second HARD drive connector?
  If Yes, you can buy this second registered a caddy to drive to a service provider.

  Otherwise it s not possible on a add a second HDD.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Not possible to change the boot order in the BIOS on Satellite satellite A10-403D

  I want to be able to boot from CD or USB STICK at first upward, but in the BIOS, it is not possible to change the boot sequence...

  Thank you for helping me! :)

  Hello Susan

  It will be interesting to know what model of laptop you have. By the description of the problem, it is always useful to know the exact model of laptop.

  When you turn off your laptop, press F12 and let us know exactly what is happening. By the way: can you explain what happen when you try to change the boot order in the BIOS settings?

• My Satellite P300D starts but does not display anything on the screen

  When I start my laptop it turns on but shows nothing, sometimes it works perfectly, and after that when I restart my laptop the screen remains black. Sometimes the screen just after 2. 3. Turn - offs, but sometimes not.
  Sorry for the bad English, I hope you know what is my prolem...
  Ty :)

  I know what your problem is, but the question is why this happen. Is this problem occurs sporadically and to me it looks like a connection problem. On this virtual path, it is not possible to provide the exact diagnosis.
  That may be, is contact FL inverter, contact screen motherboard or something with the graphics card.

  In any case, it's probably unwanted material.

• Satellite A200 - 26 d display is visible only on the external monitor

  I have a display problem with a Satellite A200 - 26 d

  As I was using the laptop, the screen went black.
  Shut down and restarted the normal red Toshiba logo came but was dark and light to the right of the screen to the left.
  Screen went black new carries on reboot but still no display.

  Connected to an external display system works very well with that and show me in display properties there are 2 screens.

  All ideas

  > Plugged in an external system works very well with that and show me in display properties there are 2 screens.
  What happens if you want to use the FN + F5 key combination?
  Can you pass to the internal display again?

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• Not possible to use the Nvidia GPU both graphics primary source all the time?

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  brian1208 wrote:

  I went through the manual and the tips of help from Lenovo and it seems that it is not possible to use the NVIDIA GeForce 840 M, 2 GB as the exclusive GPU card.

  The only control that I can find is one in the Panel of 3D graphics and if I read this correctly it assigns that Nvidia will be used when require it strong application processes (I'm guessing games play?) but for activities such as photo editing, it is up to the intel sur-bard chip

  To force an application to use your NVIDIA graphics card, right click on its shortcut (or an .exe file), point on run with graphics processor and select the NVIDIA processor high performance.

• Get the message: it is not possible to load the user profile after Windows updates

  Original title: Windows won't let me sign after updates

  Last night when I turned off my computer I saw that he had a few updates to do let him - now it won't let me login and when I try to it says that it is not possible to load the user's profile (it's the only one)...

  Recently, I installed Office and Windows 7. My anti-virus is the one that is provided by microsoft. Help!

  Hi romanista,.

  You can read the following article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Not possible to do the updates

  I tried to do the update for the Nokia Music Player, but it has been discontinued. Once this system get stuck while it cannot install most anything. It happens only the error message which says that "it is not possible to update because the other installation is running. Problem, is that it is not possible to remove Nokia Player (using the control panel) because it gives the error message "it is not possible to remove the program because it is used by the other program. What should do?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error "Windows Media Player cannot play this dvd because it is not possible to activate the analog copy on the output screen protection".

  Original title:

  Trouble viewing a movie on dvd.

  Hi, I have windows 7 on my mini with an external dvd/cd. I'm not able to watch a movie because of the error "windows media player cannot play this dvd because it is not possible to activate the analog copy on the output screen protection. Try installing an updated video card driver"Please help... I am new to this. Thanks in advance.

  Hello

   
  I suggest you try the steps in the following link and check if it solves the problem:
   
  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection
  http://support.Microsoft.com/kb/2004673
   
  I hope this helps!
   

• Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection.

  "Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output screen protection. Try to install a driver available for your video card. Is the error that keeps popping up. Even after the update driver... now what do I do?

  Hello

  1 did you change on your computer?

  2. not this problem occurs with the particular DVD or with other DVDs?

  3. is the specific issue limited to the DVD?

  4. are you able to play the DVD in the other system?

  Method 1:

  I suggest you follow the link and check.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Method 2:

  I suggest you follow the link and check.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

  http://support.Microsoft.com/kb/2004673

  See also:

  Cannot read DVD

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167