Satellite A200-1DN - network drivers of Windows XP Home edition for imaging

Similar Questions

• Satellite A300-203 - need drivers in Windows XP Home edition for the HDMI output

  Hello world!

  Given the poor performance of Vista, I decided to install XP on this machine. I installed all the drivers (from the Toshiba Site) available for my laptop XP, everything is a work, * but HDMI Out does not work *.

  I tried to install the driver Vista 'HDMI CONTROL MANAGER' (XP specific drivers for the hdmi not available on the toshiba support site). HDMI worked after that on my TV but then I got a blue screen, the operating system crashed. I decided to uninstall the driver again just in case.

  Is there a solution to get the HDMI out works under XP? A good pilot? Something reliable?

  Thanks for your help!

  Greetings from the Spain

  Hello

  My U400 supports HDMI port and I installed Win XP on it.
  I didn't install any control HDMI for Vista Manager
  It was not necessary!

  My Win XP is updated, I installed the graphics driver and all the other drivers, the tools available for Win XP!
  That was enough to get the job of HDMI

  You must ensure that your BIOS is up to date.
  In addition, you must install common Module utilities, controls and don't forget that your graphics driver is up to date!

  Then, you would be able to use the FN + F5 to switch to the TV

• Satellite M100-165 - need drivers in Windows XP Home edition

  Any body please help me where can I download a newer driver for my laptop Toshiba Satellite M100-1211E (PSMAAL - 01 P 004) run with Window XP SP2 comfortable, when I use Windows Vista, driver it is OK but use with Window XP driver fail to function as for example could not found mic, Fn key could not operate with all functions

  Thank you
  HChau

  The PSMAAL series is unclear to me. I guess you mean the Satellite M100 PSMAIE.

  From my personal experience, the FN keys does not work because the BIOS does not support.
  Toshiba European page offers two versions of the BIOS.
  One for Vista and one for XP. Seems that the 2.8 version supports only the XP and not Vista.

  So if you have installed the XP you must update the BIOS to the correct version to get all functions running.
  In addition, please follow the installation instructions located on the driver page.

  Please install also all MS QFEs. This is very important! And upgrade the XP to the last State.

  Best regards

• Windows XP Home edition for the satellite A100-337 ethernet controller driver

  No one knows how this laptop ethernet card. I'm looking for a driver for him so that it will work with Windows XP Home edition. Those listed on this site offer unique Vista based ones.

  See you soon

  Hello

  On Toshiba download page that you will not be able to find drivers Windows XP Home edition for laptops pre-installed with the Vista operating system.

  I have google a bit and discovered that your laptop should have card LAN Intel Ekron-R (82562GZ). Try to visit the Intel support page, maybe you can download driver for Windows XP Home edition operating system.

  Good luck!

• Satellite Pro S300-11Y - downgrade from Windows XP Home edition does not work

  Hello

  I have a SAT PRO S300-11 since January 2009. It came with CD to downgrade to Windows XP, and I did several times over the years without any problem. But now I do and what finish to downgrade, when done last reset, windows starts to have problems and doesn t work.

  But if I do not the last reset on arrival of the downgrade the machine works perfectly, but when I do reboot then when windows starts it works. I try 5 times and still the same. I come back to windows original vista (I did CD to do) and it happens the same problem.

  Any help greatly appreciated,
  Thank you and sorry for my bad English.,.

  Jordi

  My English is not so perfect, but to be honest, I don't understand you.
  Do you mean by reset? Do you mean, finally, restart?

  By default the BIOS settings and try to reinstall Windows XP Home edition recovery image.

• Satellite X 200 and the drivers of Windows XP Home edition

  Hello

  This is my first post in the forum of Toshiba.
  I would like to ask if someone has successfully installed the windows xp operating system in the 200 X-
  with the support of pilots complete ex:
  NVIDIA graphics drivers all other question yellow marks appears in Device Manager.
  If Yes can post a link to download drivers Toshiba download driver page doesnâ because? t support NVIDIA graphics drivers and other drivers for Windows XP Home edition.

  Thank you very much
  Sorry for my bad English.

  Take a look at the post Johnny s!

• Satellite Pro P200: Need the drivers of Windows XP Home edition

  Does anyone know a source of XP for my P200 Pro drivers.

  WXP installed without problem but the toshiba download website does work for me.

  All the links go to ' support.toshiba - tro.de'

  > All the links go to ' support.toshiba - tro.de'

  Sorry but I don't understand the meaning of this sentence. On the Toshiba download page, you can find the drivers of Windows XP Home for SP P200. Check the Instructions of facilities document and install all classified drivers following the order of the facilities.

  All that s!

• Why the Satellite A100 PSAAN drivers of Windows XP Home edition?

  I won't work with vista all the time but Toshiba makes me use all the time because they do not support drivers for Windows XP Home edition. And I have to work with WXP because vista does not work with some programs that I need and that is not good.

  I need them immediately and I still ask why the drivers for Windows XP Home edition are not there?

  [Edited by: admin on May 6, 2007 14:19]

  Hi Duge

  As you update and upgrade are typical in PC world and these processes have priority and are definitely looking to the future. Downgrade still isn't back. It is also important but has no priority as upgrade.

  I assume that upgrade supported for all mobile phones capable of Vista is not yet complete. I'm pretty sure that new notebook will build for Windows XP Home Edition, but it may take a little time. Be patient. You can also view other topics on this technical forum. You will find lots of useful information about OS downgrade.

  Bye and good luck!

• Satellite L40 - no sound after reinstalling Windows XP Home edition

  I really need help from anyone out there. I installed Windows XP Home edition on my Toshiba Satellite L40 after that I realized, there is no sound. I tried to install all kinds of updates, drivers and all, but still nothing.

  All make me is that I have no audio device.
  Grateful for the help as soon as possible.
  Holla.

  Do you have the yellow marks in Device Manager?
  Are you sure that you have installed all the drivers?

  Have you installed SP2 or SP3 for Windows XP? You must at least use SP2 for XP.

  And as said Akuma, check the Microsoft KB to the hoftixes. Before you apply this update, you must remove the driver. Otherwise it will not work.

  You can also search in the forum, there are already discussions on this topic.

• Satellite L40-139 - need driver Windows XP Home edition for 'ethernet '.

  Please can you send me the link to Satellite L40 ethernet control model of laptop for Windows XP Home edition?

  Hello

  Satellite L40-139 belongs to the PSL40E series. Am I wrong?
  You can check the serial number of your laptop. It should be placed somewhere at the bottom of the unit. Check all labels.

  Anyway, the Toshiba driver European page doesn't provide XP drivers for this series at this time. Seems you have to wait a bit until all pilots to be released!

  For the only moment that two versions of the BIOS for L40 PSL40E if released.
  The BIOS must be updated to the XP version, if you want to use XP on this laptop.

  By the way; It seems that this series is supported by the Base map - TX Ethernet Realtek 10/100.
  Then you can try the LAN driver from the site Web of Realtek. Should also work.

  Good bye

• Tecra A2 - new drive HARD and have no idea of installing the drivers of Windows XP Home edition

  Hi all, have not been here in a while...

  Where should I start... Have Tecra A2 and the HARD drive died on this issue... was not able to recover whatever it's him so bought a new HARD drive.

  Rather than taking it to a repair shop, I would like to re - install Windows XP myself, save money and have a clean install.

  I know that I have to download the drivers from downloads for Tecra, but haven't a clue as to who and the most appropriate.
  Could someone be so kind and point me in the right direction to get my operating system again?

  Thank you.

  I agree with you. Do clean install of Windows XP Home edition and install all the drivers, Toshiba tools and utilities following this order of installations:

  Windows XP SP2
  Chipsets Intel (r) software installation utility
  Intel (r) 82852/82855 GM/GME Graphics Controller V6.14.10.3722
  TOSHIBA common modules
  TOSHIBA Hotkey Utility for display devices
  SigmaTel Audio WDM Driver
  ALPS Pointing-device Driver
  TOSHIBA-button On / Off Utility
  Launch and TOSHIBA Touch
  TOSHIBA Software Modem SM2138ALD04
  LAN driver
  Atheros wireless network adapter
  TOSHIBA Power Saver
  TOSHIBA utilities
  TOSHIBA console
  TOSHIBA controls
  TOSHIBA ConfigFree
  TOSHIBA PC Diagnostic Tool
  Driver DVD-RAM
  CD/DVD Drive Acoustic Silencer
  View of TOSHIBA for Ext.Monitor service

  I hope that everything will be OK and you will be able to use Windows XP Home on your Tecra again.
  If you have any other questions please let us know.

  Good luck!

• Satellite U400-10 has: Downgrade from Windows XP Home edition

  I got my laptop U400-10 for XP. Few things left pending:

  1. How can I get the LED on the top of the screen (and Satellite/power LED) to decrease intensity again by pressing the LED light on the top of the screen? Worked under vista. Cannot run Windows XP Home edition. Probably a Toshiba driver... but the Witch one?

  2. I get a Device Manager question mark in front of audio storage devices and mass HD. I checked the internet and it seems related to the HDMI port. But how to fix it? I can't identify the right Toshiba drivers on the page/download driver Toshiba.

  3. How can I get Bluetooth (with the standard windows drivers)? Bluetooth Monitor driver Toshiba form doesn't seem to work.

  Thanks for the replies.

  Concerning

  Hello

  (1.) I think you could turn on and off the LED of Illumination in the BIOS.
  But maybe it s not supported under Win XP.

  (2) some features are not supported by XP. This unit is probably the module of Robson former Turbo Memory. This material will be supported only by Windows Vista so there is no driver Windows XP.

  (3) possibly you have ONLY installed the BT monitor. It is a diagnostic utility, and if you want to use BT you need a driver of BT.
  The BT driver can be downloaded from the page of the portal of BT or driver Toshiba

  See you soon

• Can I downgrade my Satellite P300-1GN from Vista to Windows XP Home edition?

  I bought a Toshiba Satellite P300-1GN with preinstalled Windows Vista Home Premium (PL) on this subject.
  Given that some of the th sotware I use only works on XP I have to install XP on my laptop.

  This laptop works with XP?
  Is it necessary to have any special disc or can I install from an ordinary copy XP (boxed version) are all the drivers available?
  Any tips how to perform the downgrade?

  Help, please.

  You can install WXP on your model of laptop. It's Windows XP Home supported and you can find all the necessary drivers WXP, tools and utilities on Toshiba support download page - http://eu.computers.toshiba-europe.com

  For Windows XP Home edition, you can use disk Microsoft facilities.
  On this forum, you can find hundreds discussions on installing WXP on Satellite A300/P300 with instructions specific to how to proceed. Therefore, use the advanced search option and read a little what others have written about it.

  If you still need assistance please let us know.

• Is Satellite A300-15 b compatible with Windows XP Home edition?

  Gys help me. I need to know in order to do my job.
  Thank you

  Hello

  To be honest you can check only. Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com > support & downloads. Choose your model of laptop (PSAJ4E) then WXP as operating system. You can see if the drivers for Windows XP Home edition are listed.

  Post the output please. ;)

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET