Satellite A200-1HV: Wi - Fi connect WinXP manager does not see the WLAN

Hello from the Russia, I'm really sorry for my English.

1st. A200-1HV, bought with vista home premium. But I have too many problems to work on vista, and I write the new version of the BIOS (download from the Toshiba web site) to my laptop. (new version of BIOS = Bios for Win XP).

After that, I install WinXP SP2 32 Bit. All good, but: after crash, Manager of Win XP WiFi standard do not work.
But Intel PROSet / Wireless works, but for me, this tool are not good.

I try to fix this myself, I manually remove the driver of wi - fi card, I manually give IP to my Wi - Fi, but unresolved problem = (Wi - Fi Manager standart WinXP can't see my home network wi - fi, * he don't see *!)

But intel Proset wireles see and correctly connected to them.
What should I do? I don't forget to set the switch Board-top of the laptop. I turned off the sound, but no result.

Regards JIABP.

Some screenshots:

http://i046.Radikal.ru/0805/BB/d02c8ffb854f.jpg

http://i018.Radikal.ru/0805/F4/da52aa3d2e1e.jpg

P.S. I connect to internet, it: laptop over wi - fi to connect to Access Point Dl-kink DWL-2100AP-DWL2100AP thruoght wire connect to the PC, PC, connect to the internet.

Maybe this information will help solve the problem.

Have you installed the SP2 and SP3 on your laptop?

Have you tried to connect to the router without using WiFi encryption settings?

Check it!

Tags: Toshiba

Similar Questions

  • HP Pavilion 17-e049wm Device Manager does not see the amd radeon 8650g card.

    Windows 7 can not find the graphics card for the amd radeon 8650g.  I tried to install the drivers from AMD and they never appear in the Device Manager.  It only gives me "Standard VGA Graphics Adapter."  Windows Update will not update.  They say that it is current because it cannot find the radeon 8650g.  AMD Setup never shows the driver file during installation.  It installs all sorts of other things, but never the driver.  As if it does not find material.

    What is going on.

    Hello:

    Your laptop is not supported by HP for Windows 7.  There is no graphic drivers for W7 for it to HP.

    My only suggestion is to try the graphics drivers from the Lenovo G505s

    http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS035764

  • The extensions Manager does not see the 2015 Photoshop

    I tried to reinstall both the result of the previous

    111.jpg

    I found a solution that worked for me.

    • Reinstall CC 2014.
    • Once CC 2014 is reinstalled, Adobe Extension Manager sees this product and can install the plugins in this version.
    • Their presence in 2014 CC makes them available to CC, 2015.
    • I heard that Adobe technical support recommends the same thing.
    • Adobe has a Web site on how to reinstall CC 2014: https://helpx.adobe.com/creative-cloud/help/download-install-app.html.  Click on the link 'Install previous versions of the applications' to access this section of the page.
    • Once CC 2014 is reinstalled, it might be useful to check to see if the extensions manager sees it as a product in the left column.  If it does not appear, try to do a cycle of removal/installation of your "My Add-ons" section of the Web Adobe AddOns site.
  • Satellite U840T-109: win 8.1 FN + F12 does not disable the WLan - LED ON again

    Hello

    Sorry for my English, I'm french.

    I have a problem with my keyboard of U840t-109 ultrabook.
    Indeed, after upgrade of Windows 8 for Windows 8.1 the FN + F12 to cut the wifi does not work.

    Do you have a solution?

    Thank you

    This topic has already been discussed in another thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73900

  • The CC extensions Manager does not see .mxp

    I can't open .mxp in the CC on Mac OS 10.8.5 extensions Manager. The CC extensions Manager does not see the files.

    I did the update and all the steps: http://helpx.Adobe.com/Flash/KB/install-extensions-Flash-Professional.html

    CC extensions Manager can't mxp extensions that have some limitations and have been deprecated in CS6. You must use the CS6 extensions Manager to convert the mxp zxp extensions extensions. There is a menu item for it. If you have not installed Extension Manager cs6, you can get it from http://www.adobe.com/exchange/em_download/em6_download.html .

  • Windows 8 does not see the hard drive on the Satellite A200

    Windows 8 does not see the hard drive on the A200.
    How to install it?

    S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
    The HARD drive is visible in the BIOS?

    Do you use the original disc from Microsoft of Windows 8?

  • Connected to but the Airport utility does not see the time capsules

    Hi, I have several time capsules.

    I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

    What now?

    Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

    Other than what Mac running what OS do you use?

    This modem you have and how is the installation of TC on the network.

  • W7 Device Manager does not recognize the Intel AMT devices

    Please help: where can I find - how to install the latest drivers Intel AMT for Windows 7.

    Hello

    Thank you for the question to Microsoft Community. I'll give my best to help you.

    From your problem description, I understand that the Device Manager does not recognize the Intel AMT devices

    What is the brand and model of the computer?

    Check out these links and see if they help.

    Computers that use Intel's vPro technology can have devices that are not recognized in Windows 7 Device Manager

    http://support.Microsoft.com/kb/976728

    Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.

    If your motherboard supports AMT technology, you can download, install the drivers from this link.

    AMT: Intel® AMT Driver for Intel® motherboards

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?&DwnldID=16936

    Note: This download is valid for the products listed below.

    Intel® card mother DB43LD

    Intel® card mother DQ43AP

    Intel® card mother DQ45CB

    Intel® card mother DQ45EK

    If the problem persists, I suggest you to contact Intel support. http://communities.Intel.com/Community/Tech

  • The extensions Manager does not see Adobe Photoshop CC 2015?

    96EESahc43k (1).jpg

    The extensions Manager does not see Adobe Photoshop CC 2015. All applications using ustanovliny creative cloud

    That's right, that it is no longer supported. Please refer to this article: Adobe Exchange

  • Satellite A200 - 23 c does not see the 2 GB Memory Stik Duo

    For me for laptop Toshiba Satellite A200 23 C. I

    t does not see memory card 2 GB Memory Stik Duo. I changed operating systems that did not help.

    All devices to see this card but on my laptop is not present.

    Other maps of working memory. How it can be a business.

    If possible, write in Russian and in English not absolutely understand that.

    Thank you

    First of all in this forum, you can post only in the English language. Other languages are not tolerated.

    Back to your question;
    Have you checked if your laptop Satellite A200 - 23 c supports this type of card?

    I ask because not all cards can be used in the slot of the card reader!

    As far as I know this laptop supports:

    -SD Card 8MB - 2 GB
    -SDHC 4 GB card
    -16MB - 2 GB xD Picture card
    -Memory Stick 8 to 256 MB
    -Memory Stick Pro 256 MB to 2 GB
    -MultiMediaCard 8 MB - 1 GB
    -miniSD (with SD adapter) 32 MB - 2 GB

    The Memory Stick Duo is NOT supported!

  • Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

    Hello

    I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

    Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

    Hello

    The CD/DVD drive needs no special drivers!
    Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

    Simply said, the Vista should recognize the drive without any problems.

    A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

    There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
    It of necessary to update the registry entry
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    1. click on the start menu.
    2. If it is a Vista machine in the search box type regedit without quotes.
    3. look for the registry key mentioned above.
    4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
    5. restart Windows.
    6 let me know if it works.

  • Device Manager does not display the DVD/CD ROM Diver

    In my windows 8 assessment does not show the CD-ROM/DVD-ROM driver. When I insert a cd, it does not show. my windows is activated. Please help because I am a student, but when I insert the modem, then I watch CD-ROM/DVD-ROM driver and at the same time when I insert any cd, it doen't show. only that a lot it shows

    Hello Rahul,

    Thank you for your response.

    To better help you, could you please confirm a number of things like:

    1. The computer is connected to a domain?
    2. The drive shows up in disk management?

    I suggest to try the steps mentioned by Geethu B responded on 30 October 2012 the link below and check if this can help:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/missing-CDDVD-drive-for-Windows-8-Professional/3d4b45cf-646f-4795-B66C-0e881ec87934

    NOTE: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    For your reference, follow the link below:

    https://support.Microsoft.com/en-us/KB/314060?WA=wsignin1.0

    Please let us know if you need more assistance. We will be happy to help.

  • Add-ons Manager does not list the Add-ons

    I've updated to Firefox 6.0. Since doing so, the Add-ons Manager does not appear Add-ons (it is installed or those who have been disabled by the upgrade).

    The Add-ons Manager simply displays an hourglass "Loading" and no progress.

    A number of my modules was not suitable for Firefox 6.0 and were disabled during the production of process that the Manager screen does not load then I don't see a checklist of these installed or disabled. They appear in the troubleshooting information.

    Make sure that the "Get Add-ons" tab is not enabled on the subject: addons page.

    You can click on the tab 'Extensions' to see the installed extensions.

  • The Windows XP Task Manager does not display the names of process image

    I am running Windows XP with SP3. Image of process names are not displayed in the Task Manager, and in the column picker image process name, although is TICKING, is grayed out. I don't have the PID numbers. So I can't say what processes are underway. There are 57 processes running, that seems to be too many.   I tried running "tasklist > tasklist.txt"from command, prompt but it just flashes and nothing happens. " Does that mean I have a Trojan horse? What can I do about it?

    BDF

    That seems good enough for me - now, we know that your XP version and Service pack, System brand and model, BIOS version, the amount of RAM installed, the size of your paging file according to NEC, your system has SATA drives and a few other things.

    47 process may be OK depending on what you have installed and running on your system.

    Looking at my notes, I see that I thought a while back that the tasklist.exe program does not come with XP, but there's a copy on my SkyDrive for you to download.

    Here's how:

    Here is the link to my SkyDrive and you can get the file you need here:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

    You can download it and when you do, place a copy of the file in these folders (assuming that Windows is installed on your C drive):

    c:\Windows\System32

    When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

    When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

    You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called tasklist when the name of the file should really be called tasklist.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

    Then, when you run tasklist > tasklist.txt, you should end up with a file tasklist.txt you can open it with a text editor.

    Even if you think yous system may be achieved a malware, it has never hurts to run these free scans before troubleshooting:

    No matter what you use for malware protection, follow these steps:

    Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

    Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    SAS will probably report a lot of tracking cookies and you can just let him delete them.

    They can be uninstalled later if you wish.

    The scans by operating clean, restart, and then fix any problems.

  • My Device Manager does not see my Dell webcam integrated monitor. It worked great for a year. We just moved. What has changed and how to fix it?

    Went to Device Manager.  It shows my laptop integrated webcam and shows my printer/scanner "cameras".  But it does not show the built-in webcam of the independent monitor, and I can't find how to get the Device Manager to see the device.  Help!

    Hello

    Dell should have drivers and the control software available on their site. Please refresh your
    If possible driver and reboot before you load the new driver.

    Dell - drivers
    http://support.Dell.com/support/downloads/index.aspx

    Help generic camera:

    Control Panel - Device Manager - click anywhere in the box of white/white - then VIEW - Show Hidden
    Devices - look everywhere except IMAGERY for your camera and if found right on it - click UNINSTALL
    -REBOOT.

    Control Panel - Device Manager - click anywhere in the box of white/white - then ACTION - Scan for
    Hardware changes. If that detects your camera, then load and restart.

    Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
    on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
    is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
    will update the driver stack. While there or not the USB update, then go to DELL and
    Download the latest version of the driver

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    Now, go to the system manufacturer (Dell) website and download the latest driver for the camera and the other related camera
    software (if not more recent get the same).

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Then let windows updates on however prevent loading of drivers who are often older than the
    those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
    really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Please check with Dell Support and forums for help and known issues:

    Dell support
    http://support.Dell.com/

    Dell forums
    http://en.community.Dell.com/forums/
    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for