Satellite A200-1ZF starts not flashing power led

Similar Questions

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Re: Satellite A200 - 1ZF Win XP & Toshiba control buttons do not work

  Hello

  I have a Satellite A200-1ZF with Vista installed initially.
  I removed Vista and install XP. Then installed all the drivers and almost everything works but these keys (power, www, mediaplayer, play, stop, back then) on the upper part of the phone do not work. :/

  Only be able to work properly... sometimes www and mediaplayer, but rest n, t work at all.
  I have Windows Media Player 9 series. I don't know if this is the problem with my version of drivers or windows media or something else...

  Help, please...

  Hello

  Satellite A200-1ZF belongs to the PSAE6E series.
  Choose the Toshiba driver download form European series.

  You will find an XP BIOS. If you are using Win XP on this laptop you will need to update the BIOS to version XP!
  In addition, you will need to install the Toshiba c. 2.48.2.2C controls.

  This tool is necessary to get the Toshiba Media buttons works!

  Good bye

• 'right' button no longer works on Satellite A200-1ZF

  Hi all

  I have a Toshiba Satellite A200 1ZF, and it's very nice. I have no problem with it, but now, since 2 weeks, the 'right' button no longer works.
  I tried a windows reinstall. I took and cleaned the surface, but nothing. He's dead.

  Can someone help me? Thank you.

  To be honest I don't know what kind of help do you expect.
  If there is anything that you can do this means that the keyboard needs to be replaced.

• Re: Satellite A200-1ZF heats

  Hi all.

  I brought this laptop Satellite A200-1zf about 1 year ago and 2 months is so hot!
  I mean it's hot enough that you can't put your hands under the cooler.

  I cleaned the cooler, but without result.

  Do you know why he keep warming in this way?

  Hello

  > I brought this laptop Satellite A200-1zf about 1 year ago and 2 months is so hot!
  This means that the temperature was very high in the past

  Well, most often at that temperature arises at a higher level than due clogged cooling modules.
  Dust and debris would prevent fans of good working condition and this could lead to a higher internal temperature.

  You can try to clean the cooling modules with a jet of compressed air.
  In addition, you must make sure that there is enough free space around the laptop in order to get good fresh air circulation.

  If this doesn't help then I would recommend contact the technician of the laptop.
  The technician can disassemble the laptop and can renew the thermal grease which is placed between the CPU and cooling modules.

  Greetings
  Jaba

• Aironet 2802i Radio0 has not started, not enough power POE on SG300-28PP switch

  When I restart Aironet 2802i which is powered by 28PP SG300 28 - Port Gigabit PoE + switch, I saw the following message:

  [* 13:47:31.8044 26/09/2016] Radio0 has not started, not enough power POE
  [* 13:47:31.8173 26/09/2016] DOT11_DRV [0]: set_channel channel set to 11
  [* 13:47:33.0109 26/09/2016] DOT11_DRV [1]: set_channel channel set to 36
  [* 13:47:33.6506 26/09/2016] Radio1 not started, not enough power POE

  Series Aironet 2800 get started guide mentions "any 802.3at (25.5 W) compatible switch port" and SG300-28PP seems to be consistent.

  Please advise, thank you.

  Dennis

  Oh sorry, I got a 2602 in my head, but you use the built-in WLC? I have not had the chance to play with those, but assumes that it will be the same.

  Try to display the summary ap and ap 802. 11A of summary config

  See you soon,.

  Ric

• Satellite A200-1UQ will not be on the way, power supply cable LED flashing

  Hello

  My A - 200 satellite 1UQ turns off suddenly when you are connected to the power. Now, he will not be in service.
  When I plug the cable LED (blue) - power cable on the laptop flashes quickly with no difference in speed or make a pause between flashes (so a balanced pace).
  I tried removing the battery and tried another adapter and power cable.

  So my question is: what does the flashing blue LED mean? And, possibly, what can I do to fix this?

  Thanks in advance,

  Matt Bloem

  Hello

  Check it please this Toshiba document as a first step and send a few comments - http://aps2.toshiba-tro.de/kb0/TSD57013H000JR01.htm

• Qosmio X 500 does not start and the power LED is flashing every 5 seconds

  Hello
  I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

  If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

  I tried to:
  * Remove battery and power up with AC only
  * power only to batteries
  * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

  but it did not help.

  I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

  No idea where could be the problem?

  Thanks for help
  Frantisek

  Hello

  The failure of RAM could be the reason for this behavior of the laptop.
  Remove the RAM modules with good modules tested and check the functionality of the laptop.
  In the case of RAM isn t the troublemaker, the motherboard could be affected.

  Good luck and share your experience with us.

• Satellite A200 - 19K does not start

  On the other computer, Satellite A200 - 19K, we here,
  When we try to turn it on, the power light comes on, and the AC power lamp light therapy if it is plugged.
  Also, the hard drive light flashes once then turns off but the screen remains black and the computer makes the usual noise "woosh" that all computers but just for a second before dying out.

  We tried to remove the battery, then replace there already, but it did not work.
  Any ideas on what could be the problem and how to fix it?

  Hello

  Sounds not good guy!
  You said that you have already tried to replace the battery?

  Try to remove the battery and unplug the power adapter for about 20-30 min.
  Then, connect the new and try to start the laptop.
  If it doesn't help then you have no choice but to contact the service provider authorized in your country for assistance.
  The A200series seems to be not not very old so I guess that your warranty is valid and the repair must be made free of charge.

  Good luck

• Satellite A200-1ZF - FN keys does not work in WIn7

  Hi all.

  Does anyone had the same problem on the keys FN on A200-1ZF?
  I reinstalled the operating system, Windows 7, and after installing all the drivers, I can't change the light from the screen by pressing FN + F6 or F7.
  Also, does not any option with FN key combination.

  Does anyone know how to solve that?
  Thank you.

  Hello

  I m A200 not owner but I A210.
  I could get the Fn keys work in Win 7.

  First in landed the VAP for Win 7 and then I installed the Toshiba Flash Cards for Win 7 support utility.

  I downloaded both the European driver Toshiba page tools. I chose the tools available for Satellite L500.
  You should try this too.

• Re: Satellite A200-1AX does not start after the BIOS update

  Hi all!

  I wanted to install XP on a Satellite A200-1AX.
  So I tried to update the Bios to the version that supports supported XP.

  When I tried to install it, crashed Vista and now the laptop won't even turn on.

  When I keep the power button pressed, the whistling fan but nothing happens.
  I think the BIOS is gone or corrupted.

  What should I do?
  Thanks in advance for any help!

  > When I keep the power button pressed, the whistling fan but nothing happens. I think the BIOS is gone or corrupted. What should I do?

  What to say to boyfriend. It seems that something was wrong during the process of updating the BIOS maybe the BIOS was not written correctly and the ROM module must be flashed again with the help of a special procedure and the tool.

  In this case, you can do anything you will need to contact the ASP in your country for a fix!

  Don t waste time and ask a technician for assistance.

  Good luck and best regards

• Satellite A200-AH1 does not start problem

  I have this Toshiba Satellite A200 - AH1 laptop computer that will not start.

  The system has 1 GB of RAM, (2x512MB).

  When I remove 1 stick, the system starts without a problem, if I replace it, and the other, the laptop boots also upwards. I tested the two ram slots and ram spent each time.

  The problem of the laptop does not start only seems to happen when the laptop has installed two sticks. I tried even to 2 different new corresponding sticks and still nothing until I remove 1 piece of ram.

  Everyone encountered this problem before?
  Any ideas what the problem may be.

  My only other option would be to install a single piece of 1 GB of ram, but I would really like a better option.

  Thanks in advance...

  > The system has 1 GB of RAM, (2x512MB).
  You got your laptop with these memory modules?
  Are you sure that you are using compatible RAM (DDR2-667)?

• Satellite A200-27R does not start

  I got my Satellite A200-27R for 2 years and 8 months and 2 weeks ago he crashed and died. At the time, I was watching on the internet and had probably opened pages 3 or 4 when it froze and I got a blue screen with white writing telling me that something had gone wrong, and my laptop has been shut down to protect themselves.

  I was unable to turn it back on for 24 hours, but when he did not return on her cost again function normally, but I backed up all my files incase it happens again. About 10 hours later the same thing happened again: freeze; blue screen and then try to restart.

  Since then, when I try to turn it back on it is stuck on the "leading innovation" Toshiba start screen; or goes to a black screen and says there has been a media test failure and something to do with Realtek x 100 or so or until I remove the battery, so it shuts down; or asks me to boot into safe mode and system restore which I made several times now, but this did not help.

  I would be really grateful if someone could tell me if they have had similar experiences, and they did, and if there is anything I can do to fix it? Thank you very much.

  Hello

  BSOD can be the result of the serious software problem or hardware problem.
  If the new OS installation didn t help you solve this problem, I think that the hardware malfunction would cause the BSOD.

  Usually the laptop automatically stops due to the higher temperature.
  A higher temperature may affect other parts like the RAM modules or the motherboard.
  Thus, in many cases the BSOD appears due to problem of memory.

  I think you should first clean the cooling modules. You must remove the dust using a jet of compressed air. In most cases, it is the best procedure to get rid of the dust.
  Then check the RAM modules. You can try to start Notepad with a module only.
  Then move modules to different locations in order to check the slots too.

  Of course, the HARD drive should be checked also. You can use a free software called Drive fitness Test. It is good, a freeware software which can be downloaded from different pages.

  If no advice mentioned would help you, then I recommend to ask a technician to Toshiba for help. They could use special tools in order to get results on the failure.

• Satellite A200 PSAFCA does NOT start

  Here's the story.

  I got this laptop Australian (A200 PSAFCA) that came with Vista, but like everyone else I can't stand Vista so I removed it.
  Tried to install XP and to my surprise XP installation has actually detected the hard drive and it reformatted no problem.
  Then starts copying files and the premiere it reboot restarts very well and then it crashes on start "TOSHIBA" logo screen then restarts automatically and goes on and on...

  There is not much I can do in the BIOS, and yes it detects the HARD drive in there.

  I'm so bored and even tried to install Vista on the lappy and omg... it won't detect the hard drive even for the installation program.

  WHATS WITH THAT! This is the first laptop I ever tried to format and I never thought it will be ridiculously difficult.
  Can anyone shed light on what I might try? I'm out of ideas.

  P.s anyone knows if re-formatting computers laptop Toshiba is out of scope of the warranty?
  Thank you guys.

  Hello

  I had similar problem with my Satellite A200. Enter the BIOS settings and the default value. Reboot the laptop and again use the CD of Windows XP Home edition installations.

• Satellite A200-1AE does not recognize the USB 2.0 flash drive

  I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
  The same USB works without problem on other computers with vista!

  Someone knows what to do?

  Hello

  First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
  After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

  Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

  Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

  Best regards