Re: Satellite A200 - start with BSOD

Hello.

I have a Satellite A200 which I had for about 18 months. I recently installed a burning software and as soon as it was completed a blue screen was displayed telling me the computer had been shut down to prevent damage.

It then restarts automatically and I try to log on, but after about 15 seconds, it goes the same blue screen and reboots again. I tried booting in safe mode but that doesn t help.

I m not really competent computer so I m not sure how to proceed.

If you have any advice really id appreciate it.

I think that if you can also boot into safe mode, you need to reinstall Windows. He s strange if your computer only shows BSOD after installing the burning software, but however, I think that there is no other way.
Do you have what burning software installed?
Maybe it s a virus and is not a problem of the burning software.

So to use the recovery disk and reinstall Windows. The HARD disk is reformatted completely then backup your data first if you can put the HARD drive in an external enclosure.

Tags: Toshiba

Similar Questions

  • Satellite A200 starts with the message "missing operating system".

    IM wondering if anyone can help... I have a Toshiba Satellite A200, who, at the start, just comes up with a black screen and the "system of missing operating" in the upper left corner.

    I looked for solutions on the net. Nothing is really done. I tried to start in safe mode using the F8 function key, but it did not work. I tried to boot from a vista recovery disk. That did not work. I tried to reinstall vista and it came just with the error 0 x 80070002. Im stuck and don't know how started it in safe mode so that I can transfer data and then reinstall vista (reimage) on this subject.

    Can you make suggestions?

    Hello

    Have you tried to get into the Bios and check if a hard drive is recognized? If not, the hard drive no longer works. If so, try to make another copy of Windows disk.

  • Satellite A200 - 19L with WinXP OS - key Fn Visual control

    Hi all

    I have Toshiba Satellite A200 - 19L with OS WinXP (I found all drivers), but have a little problem with it:

    With previous (event with this under Win VISTA) Toshiba laptops when I was doing operations with a combination of Fn keys (for example Fn + F5 - for then between the LCD screen and an external display or a projector) I could see a few icons on the screen (for the example above, a series of 3 icons representing the LCD displays only the LCD + external display) External display only; the same was hapenning when you use Fn + F6 or F7 - brightness - I saw the brightness icon and a cursor moving upwards or downwards according to the used key combination).

    Now, with the XP drivers on my laptop, I have absolutely to the specific features of the Fn key combinations but HAVE a no. VISUAL CONTROL of them.

    Does anyone know HOW can I restore on the computer?

    Thank you guys!

    I have the same problem. It worked before, until
    probably a windows update has been mess up with the function FN + F5.
    I tried to update the driver for the graphics card from NVIDIA. Who knows...
    I try so many things, but it does not work.

    When I press FN + F5, I have only the choice with the icon of the LCD screen. Until I'm OCR a and OCR + LCD screen (they disappeared).
    I wrote to TOSHIBA, but no response. I read on many forums that much laptop Toshiba you have this problem.

    Could someone help us?
    Thank you

  • Satellite A200 starts not - LED flashing error

    I have problem with my Satellite A200.
    The battery button blinks 2 times blue and orange 2 times and it does not start.

    Can someone help me?

    Hello

    Please check this interesting document: what can I do if my computer will not Power On?
    If the problem persists please let us know.

  • Satellite A200 - STARTING problems, freezes on the connection of the power adapter

    My 3 YO A200 (PSAF3A-08202D has developed a problem with starting.
    I can start on battery power with WINDOWS VISTA BUSINESS (after 10 attempts, but freezes immediately when the power adapter is plugged in.)
    Display sometimes boots wide-screen, but mostly freezes before windows welcome.

    When running, the battery produces about 1 to 2 hours before a complete evacuation.
    When executing a battery, computer freezes when I plug Charger AC/DC immediately and going with my A100 charger as an alternative.

    Initial problem was a faulty hard drive and super hot air flow due to fluff the cooling block fan.
    Tech replaced original 120G HDD with 500 G and reloaded at the factory. works well for 3 months, then started with the same problems so conclude original disk HARD was just a secondary issue.

    So maybe fixed I overheated components on the motherboard. Reset of data cards initially fixed a problem starting but is gradually degraded.

    Reading through the forums seems that there is a huge amount of these laptops with similar issues. Is this a design flaw, like my other Satellite A100 is solid as a rock. All forums, which suggests resetting the cpu is running slow or be disconnected seem to be temporary repairs. Boot in safe mode and reset the default settings have no effect.

    A suggestion that a capacitor is at fault seems to be the fix is valid but which involves specialized tools is not available locally. Local agent of Harvey Norman for Toshiba are best part of unnecessary because they can send in Australia from Toshiba. Machine has been close to $2000 and is now worth Zip.

    I am unable to do anything with this machine, as all the ways of upgrading or resetting calls for AC power available and running.

    I'm about to do radical things and hope that this forum can enlighten us.

    Hi Mickaël

    You might be right. It seems that the motherboard is affected.
    Don't know why but higher temperature can still affect the internal parts.
    The temperature may increase if cooling fans n t working correctly. For example dust or debris leads to a higher temperature because cooling air cannot circulate properly.

    I have to clean my laptop's cooling grilles from time to time using a jet of compressed air. This allows to keep the temperature at the lower level.
    Of course the internal temperature is not always a reason for portable computers hardware malfunction equipment can begin to malfunction as always in an other products too: TVs, cars, game consoles

    I bought an extended warranty for my laptop, also for my LCD TV mercy always if a high-end product begin to malfunction and in the case of a warranty claim, the fault can be fixed free of charge.

  • Satellite A200 - problems with the AC adapter / CC

    Hello

    The problem concerns a Satellite A200 (PSAF6A-02H01N).

    Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
    But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

    The problem got worse now and the laptop will not load Vista end without crashing.
    We have now reduced the computer down to have only a problem when the power adapter is connected.
    The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

    The problem persists with the AC adapter is plugged in and the battery removed.
    The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
    The laptop will not work under the battery power for 30 minutes max.
    I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

    Is this only a problem of AC adapter or the problem with the laptop?

    Thanks in advance...

    The Canada Gazette

    I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

  • Satellite A200 - 15l (PSAE2E) - BSOD play Sims 3

    Hello

    I've been running the Sims 3 on my laptop for a few days.
    It had been fine until last night when I had the * _display driver igfx stopped responding and has managed to recovered_ error.
    This led to the screen, blacking out and eventually turn to blue.

    I have a Toshiba Satellite A200 - 15l

    Model # :* PSAE2E - 00J00CAV
    Processor: * Genuine Intel(r) CPU T2080 @ 1.73GHz 1.73GHz
    RAM * 2.00 GB
    System type: * 32-bit operating system

    I use Windows Vista Home Premium w / service pack 1.

    I'm not very tech savvy, so you will have to bare with me, my apologies for that, I'm not sure where to find what graphic card I don't have 100%.
    I found "+ Mobile Intel (r) Express Chipset family 945 + y ' tab display of maps in the management of the computer if this is useful.
    If this isn't the case, could you please tell me how to find any additional information, you may be able to help me with this problem.

    I've updated the Express CHipset Family driver, I have just mentioned, installed all updates of windows my computer found and tried to run the game out of full screen in xp compatibility as well, but none of this stopped the game crashing.

    Any advice would be very helpful, sorry if I have not provided all the necessary information.

    Martin

    Hello

    Normally to reinstall the display driver should solve the problem, but before that, you first remove the old version of the driver.
    Your laptop is equipped with an Intel 943GML graphics controller and driver can be based on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    The same error on my laptop's girlfriend with the SIMS 3 and update the display driver solves the problem. :)

  • Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure

    Hello

    I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.

    Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.

    When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.

    I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.

    Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
    Would this work?
    Anyone have any ideas?

    Here's an interesting article from Microsoft Knowledge:
    http://support.Microsoft.com/kb/270008/en-us

    You must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
    Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Reboot the laptop and check if the CD/DVD drive would work again!

  • After the last update of BIOS that Satellite P100 locks with BSOD

    Hello

    Due to several problems meeting with updated Toshiba Satellite P100-221 (PSPA6E) launch second online BIOS updated. I have download and I solve problems with my video card and the race of missing keyboard. After a short period, they put on the update of the BIOS rd page 3 drivers.

    I'm trying to find what ever they change with this new update, but I na? t find anything. So I decided to update my BIOS again. Now as a result my system crash very often when I quit & restart my computer (blue screen).

    Microsoft advised me to reduce the video acceleration for video adjustment.
    Maybe can someone explain to me why I have this problem?
    I use the same drivers and software same as in the second update
    I can find BIOS previous to rewrite again, because this one works very well with my laptop?

    Thank you!

    Hi Sebasian

    I use very long books and I've never updated the BIOS if not necessary. What laptop works well, OS stabile, why should I do it? I don t care if new BIOS update is available or not. I've always been skeptical about the updates to the BIOS. That's just my opinion.

    As far as I know, it is not possible to downgrade the version of the BIOS without special tools and it can be done by service partners. It is not easy to tell if the BIOS is responsible for this, but if possible, try to send us illustrated if BSOD errors.

    If I were you I backup all important data and reinstall the recovery image, configure OS for my needs, and make sure that everything is clean pre-installed. My experience with BSOD were always related software.

  • Satellite A200 - interfacing with Sky HD box, via the i.Link on my laptop.

    Satellite A200-1VP

    I'm trying to find away to check my laptop DVD, my disk drive hard SKY HD boxes, so I can copy the recorded programs from the HDD to DVD discs from the sky.

    But don't have a HDMI interface port, only the AVI & output VGA, which does not have a digital input, only the other signal output as we understand it.

    So I thought to using the port i.Link (IEEE 1394-a), as it was designed to send DVD date camcorder to the laptop to be registered? wouldn't the camcorder DVD send a digital signal, and if this is the case, shouldn't it work this way? Is there a device or cable on the market that I could use to make the possible interface to do this?

    I have watched cable, through the Internet but can't seem to find a HDMI / i.Link (IEEE 1394-a) lacking USB i.Link (IEEE 1394-a), but seem to be under the impression that the USB 2 is unable to deliver the date at a fast enough speed to make it work...

    Any ideas would help thanks.

    Why don't you talk with your local dealer and experts for this?
    If you do not have matching port on your laptop, you need another external solution.

    Check http://www.pinnaclesys.com/PublicSite/uk/Home/ and all products here.

  • Satellite A60 crashes with BSOD using the WLan connection

    Hello

    The son laptop works well 24/7 If you use the local cable network on web access, but as soon as we install Wifi it crashes on a regular basis (2 or 3 times an hour) with BSOD error messages - normally those helps Microsoft cant (via the event viewer report) with but it is often talking about Toshiba phone services but no solution.

    Tried two (netgear) pcmcia & usb (agere) wifi cards - exactly same problem can not maps.

    In desperation re-formatted & resettled Xp & all drivers Toshiba of original Cd of Tosh, then Xp Sp2 & then all the updates/fixes engineering including the bios from site Web of Tosh. Still crashes.

    If the software has - v installed or not makes no difference.

    A 512 extra ram on top of 256 original.

    Any ideas?

    Please believe me that it is not easy to say why the BSOD appears!
    From my personal experience, that the BSOD can occurs because of the problem of critical software, or because of the problem of equipment.

    In your case, it looks like a hardware problem (this is my personal opinion)
    Generally, the laptop should work with the external WLan USB card. I put t see no reason why it shouldn't work t.

    You said that you have updated the RAM on this laptop, I noticed on many laptops than similar issues after a RAM upgrade.

    For example; I inserted the new 1 GB RAM on my old Satellite and received a BSOD. I used a compatible but the BSOD appeared sometimes.
    After the passage of the modules to another location memory my laptop works properly!

    Please check this box. Maybe you could check if the same thing happens with your old module!

    Good luck

  • Satellite A200 starts

    Hello

    I had Satellite A200 given to me will not post.
    Long warranty, but what I like to know what error or light mean because he try to post.

    I get two 2 blue lights on it, power and ms in.

    If remove the ram I get no beeps or anything.
    If do USB floppy and try the crisis on that disc search disc playback as it try re-flash bios?

    I think I got the same problem.

    I had to get it fixed, but it was on warranty... almost a week.
    They have changed motherboard with CPU and graphics card too...

  • How can I watch a movie DVD on my Satellite A200-1HE with Windows XP Home edition?

    Hello

    I bought a laptop Satellite A200-1HE and have uninstalled Windows Vista. Now I have installed my own purchased copy of Windows XP and downloaded the drivers from the Toshiba web site. But now I want to use the computer to watch DVD or write CD disks, for example, and I can't find the software that came with the laptop (Intervideo, creator of disc, etc.).

    Do I have rights for this software? How do I download and install for FREE, because I just don't want Vista, I want to use XP?
    Thank you

    Wagner R. Landgraf

    > How do I download and install them for FREE, because I just don't want Vista, I want to use XP?

    This additional software was shipped only with the image of Toshiba and cannot be downloaded for free! You must understand that there are different copyright restrictions and original Toshiba software (drivers & Utilities) can be downloaded from the Toshiba page.

  • Crashing - Satellite A200-171 with Vista Home

    I recently moved to the UK Turkey and brought a satellite 210-171 with me (need an English keyboard as Turkish alphabet is different).

    The machine is only 7 weeks and started to plant almost daily. Simply, the screen becomes black and must be restarted to bring back to life. To do this, this race of battery and network.

    I hope that it's wrong to finger. I dread the idea of trying to get it fixed here I believe that the only authorized service center is based in Istanbul, some 14 hour drive from here where I live.

    Any advice would be much appreciated

    Hello

    something like your problem must first be troubleshooted on a software level. Yes, thinkabout software you´ve installed recently... remove it. Then, if the system fails again, perform a recovery on your computer and update then all your drivers/bios/tools.

    If it fails again, check your memory, if they are defective. This could be done by downloading * prime95 *, which is a very good program for stress testing your CPU/RAM.

    And if you're still out of luck then contact ASP in Turkey and send the machine for them. I think they should manage the repair very quickly since your machine is still under warranty.

    Welcome them

  • Windows 2008 R2 on HP ML115 restored to VM does not start with BSOD Stop 0x0000007B

    As a contingency plan for our server HP ML115 running Windows Server 2008 R2 Foundation, we want to restore the backup created with windows (optional bare metal) backup to a virtual machine under VMware player 3.1.2. Restored boot fails with BSOD Stop 0x0000007B. Initially, the machine works with the integrated Nvidia RAID controller. We tried with the converter to migrate the image to the new disk controller, but the virtual machine does not start. Any attempts to install the driver LSI SAS 3000 in the physical machine failed because the seller and models do not appear in the console devmgmt even if we are using the corresponding diskette/driver.

    Any tips are appreciated. Thank you.

    You may need to start the virtual machine with an Image of CD/DVD/ISO OS appropriate Live with the ability to edit the Windows registry on the client, and clear the nonexistent controller while allowing the new virtual controller and add the driver if necessary and check the .vmx config file is to show the controller suitable as well.  I did not go with your particular scenario however have done with similar cases so it's doable.

Maybe you are looking for