Satellite A200 turn itself right after I turned on

Similar Questions

• Satellite A200 - turns off randomly

  My Satellite A200 turns off randomly, I don't know if it is the power supply or 32 file system. I have re-installed Windows Vista 32-bit. and the problem still persists.

  Would that my adapter or power suply?

  Your laptop may turn off due to overheating. Before you start with your problem, did you laptop computer cleaning?

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

• Dead by Satellite A200 - 1 c 3 after involuntary Bios Update

  Dead by Satellite A200 - 1 c 3 after involuntary Bios Update!
  Help, please!

  Hello

  It's a shame, but it seems that you need a help of a Toshiba ASP. technicians
  In the best of cases, only the ROM module must be flashed once more in the worst case that the motherboard could be damaged. :(

• Re: Satellite A200 turns off

  Hello

  I have a Toshiba Satellite A200. After 12 months of owning in, its has started to turn off his car, then does not supply power for some time, before giving up the ghost completely!
  I tried a new AC adapter and battery, but no joy, I have read it could be the power supply? Is this a case of buying a new one and soldering in place?

  Thank you very much

  Adam

  Hello Adam

  You must understand that it is not easy to tell if this happens due to power or other reasons. Have you noticed that laptop rest without power (all LEDs are off)?
  Maybe your laptop overheats and shuts down. What do you think about this?

• All new Satellite A200 turn on the first time

  I bought a Satellite A200 yesterday and can't turn it on. The power button turns on power, but the start does not start if the power light is on.

  I have to turn on and off at least three times until he decided to start.

  Is there a secret method?

  Hello

  Hmm in your case I would be to remove the battery from the laptop and unplug the power adapter.
  Wait a bit (~ 20 min), then reconnect the two parts.

  I put t know why your laptop didn't start for the first time, but I recommend this behavior of monitoring specifications.
  If this will happen again, and the more often you should contact the authorized service provider in your country to control the laptop.
  If something is wrong that the warranty should cover it.

  Good bye

• Satellite A200 turn off when power plugs

  Computer laptop Toshiba Satellite A200 works fine on battery, taken soon hand, he goes on immediately but it works with the power of the network while its in safe mode.
  Help, please.
  Thank you

  Laptop works fine with AC power only, when the battery is removed?

• Satellite M100-233: stops right after the "XP" logo

  Hello
  I have a Satellite M100-233 with XP Home Edition SP3 (in Portuguese)
  When it is connected to the mains and the battery is not fully charged, sometimes the yellow light does not shine.
  Check the voltmeter application when this happens, tells me that the battery is on, the energy source is the sector, but the battery runs down.
  As I continue to use the laptop, the amount of the battery is reported as progressively less, until he tends to zero, then the laptop just turned off, as if she was not connected to the mains.
  Even if I start with the battery charged to 100%, after a couple of hours (sometimes more, sometimes less) the same thing happens.

  From an authorized dealer, they told me that it was probably a short battery shorted out.

  Get not that: * if she take the battery out of the laptop and turn it on:
  -Most of the time it turns off right after the "XP" logo.
  -It seems that this happens more often when the battery was fully charged the last time that I used it (strange! "I imagine this?)
  -Also sometimes happens after that I use the laptop for a while

  The only unusual bios message I get is "no TPM or TPM has a problem." I guess it has to do with the cryptographic protection, so I imagine that this has nothing to do with this issue.
  About two years ago, there was a problem with the battery (it ceased to be recognized as present by the laptop) which has been repaired under warranty: they told me that they had replaced the motherboard then. However, at this time there that I could continue to work normally without the battery, which is not the case now.

  I would be grateful for any advice. The most annoying is that this problem follows an irregular pattern, and the diagnosis, the dealer gave me seems hard to believe. As I use my laptop to collect data for research abroad, it is quite a risk for me to use it if I can't be sure when it will turn off on its own.

  Hello

  To be honest, I doubt that anyone here in the forum would be able to provide an exactly the answer to this question
  I think that it of almost impossible to say what's wrong without running any hardware checks.

  But to me it looks like a card mother number possibly it s power of electronic power supply which is part of the motherboard.

  What to say, maybe you need a new motherboard, but the new mobo is an expensive item, and in my opinion, you should first check if it is s to replace the motherboard or buy a laptop second hand for the same money.

• Satellite A200-13R - black screen after cleaning the fan

  Model name: Satellite A200-13R
  Model no: PSAE0E-011014GE

  I clean the fan, and I put new thermal paste to the processor. After finishing this job button press / the laptop works but the screen is black. The laptop shows that read the hard drive and the processor works well. I'm trying to remove the battery, disconnect the power, hold the button works / power off for 60 seconds, turn on computer with power plug, then stop, add the battery and restart * but the screen is always black *. I try to press Fn + F5 reboot screen * but again is black *.

  Any solution please?

  Thank you

  Nick

  You have disconnected the display while you cleaned up the laptop?
  Are you sure that the display is connected correctly?
  Check the cable?

  > The laptop shows that read the hard drive and the processor works well.
  How do you know that? Flashing LED HDD?
  You know, it's not easy to say what may be the problem.

  You can also try testing with external monitor.

• Satellite A200 23W stop seconds after pressing the power button / stop

  Hello all :)

  I just bought a laptop Toshiba Satellite A200 23W a few hours ago.
  I turn it on and let it complete the installation of Vista.

  After the installation of Vista finishing it asket to resturn laptop and from that moment, the laptop is "dead".
  After pressing on restart the computer (from Vista) computer turns off without problem, but he never did it again!
  After a few minutes of waiting, I tried to start it by pressing the power button.

  Now when I press the power button, I can hear the HDD work and most of the time until I see something on the screen of the laptop computer stops!
  Now, I noticed that both the battery indicator AND the DC IN light are hot flushing and stop Flash at times.
  Reading the manual, I guess that the DC IN indicator should Flash in all not well.

  I tried to uninstall the battery and try to start the laptop, but in this case I can't even listen to the HDD, commissioning!
  I try to unplag and replag (on the laptop as well as Jack) power cable but again no result.

  Any ideas of what past?
  Thank you very much

  I don't know what the problem is here and, in my view, should not be so important to you. Contact your dealer as soon as possible and to talk with him. Explain the situation. You will get may be new notebook. Otherwise, please contact the nearest authorized maintainer and let check your laptop.

  The laptop is brand new and it should work. Please do not wait too long.

• Satellite A200 PSAE6E: unknown devices after installing XP

  I have a Satellite A200 PSAE6E and it came with Vista.
  Now I downgraded to XP my self and installed all the drivers I could find on the toshiba site
  I still have these problems:

  1. I have a pci memory controller which is not identiyfied by windows and I want to solve that

  2. when I connect my video camera pit 4 pin firewire to my laptop not found and when I do it by USB ieee1394, I get the usb device not recognized (trieed download of drivers for the cam, but they do not work)

  Please help me :)

  thnx

  Hello

  Regarding the point * 1: *.
  The "PCI memory controller" or "Mass Storage Controller means the former Turbo Memory module Robson." This feature is only available on Vista, and that's why drivers are not available for Win XP.

  Check this box:
  [No driver Windows XP for PCI memory controller | http://aps2.toshiba-tro.de/kb0/TSB83023N0000R01.htm]

  (* 2) * I put t know how it works with your camera, but I need to first install the cam drivers then I connected the camera to the laptop with a FireWire / USB 2.0 and then I turned on the video camera.
  My A200 she recognized immediately.

• Satellite A200 - no audio device after the awakening of the mode 'sleep' or 'putting into hibernation'

  I own a Satellite A200 laptop computer with Windows Vista.

  Sometimes when I put my laptop in 'stand by' mode or 'Hibernate', he wakes up with no audio device. (Error - no installed audio device). The problem is solved by restarting my computer, or by placing it in the back to 'stand by' and turning it back on.

  I reinstalled my OS using the recovery cd - and the exsists yet problem.
  (Version 1.30, Audio bios driver ver. 6.0.1.5374)

  Is this a known problem or is it just my computer? I'm afraid that it is a hardware problem. (The laptop is less then 1 month).

  Thanks (and sorry for my "rusty" English :-()

  Tomer

  Hi guys

  Can you please check this Microsoft article? Maybe this will help.

  http://support.Microsoft.com/kb/929685/en-us

  By the way: is your A200 with or without built-in webcam?

• BSOD on Satellite A200 - 1 m 8 after the release of the standby or hibernation mode

  Hey...

  I have a laptop: Toshiba Satellite A200 - 1 m 8 OS: Win Xp Sp3

  After taking over my computer in standby or hibernation, I got the blue screen "appeal of dysfunction - parity error - hardware your... provider etc..." »

  I checked my GPU drivers updates and checked the memory RAM models, but all seem ok.
  I also put the count to run with the base of msconfig drivers but wtihout any positive results.

  Any idea what the problem might be?

  ....

  Hello

  As far as I know on the Satellite A200 BIOS should be updated to the version of the BIOS Win XP if Win XP has been installed on the machine.

  Update you the BIOS to the version of Win XP? If this is not the case, this->.

  I searched a bit on the pages of knowledge of MS for some details about this error and found this page:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q222973 &

  Microsoft means that this error could be related to the failure of hardware.

  This could be fair and I think that in this case, you must contact the ASP in your country to verify the keyboard and the touchpad.
  Maybe the parts should be replaced.

  See you soon

• Re: Blank screen on Satellite A200-1 body weight after flashing the Bios

  I have a Satellite A200-1 of body weight, and I flashed my Bios when the laptop froze.
  So I had to restart now, the screen does not light.

  Any help on what to do?
  Do I need a new toshiba Bios Chip?

  I have a Satellite A210 - 16G and I decided to the new version of BIOS (2, 00-WIN32) flash. I downloaded the new version, the decompressed files two (setup.exe and alaa200a.rom), quit all running programs and disconnected from the internet and launch the setup.exe.

  After a program window apperared and it starts automatically check my bios version (strange thing - cooler system started working with maximum RPM) and after 5-10 seconds, this window became blink and at the top, there was a message 'no response '.

  I thought that it is ok and I expect about 15 minutes for a result...
  But I suck. I closed the window and tried to restart, but suddenly I got a white screen.

  I disabled a camputer in now the power button / stop.
  And after that I can depend on to it - I press the power button, then a power led lights and that's all, blinking screen, no response.

• Satellite A200-1SM is slow after installing Vista

  Hello.

  I have a problem with my Satellite A200-1sm computer.
  Yesterday I installed Alcohol 120% program and something happened.
  My computer stoped working and a restart and blue screen.

  After that, I installed the Windows Vista again and installed the driver.
  My processor is slow (before this happened was 3.8 after 4.6 and 4.5 memory after 2.7) and my memory is slow.

  Help

  Hello

  I installed the tool Alcohol 120% a few months ago too and as far as I know this software creates virtual drives and you can emulate max 31 readers.

  I m not 100% sure, but maybe this could be the reason for your BSOD issues possibly the software isn't 100% compatible with vista OS.

  However, after installation since the laptop recovery CD uses the factory settings and should work fine. I don t think that your laptop works done slower, is that Toshiba picture (from recovery CD) contains a large number of programs that regulates the functions of the laptop and run in the background of the OS. These processes need resources from the laptop, and so the Vista experience index may change.

  This is why I am 100% sure that your laptop is ok.

  You should visit the Websites of Microsoft and should read a little about this index, and how it works.

  Good bye

• Satellite A200 - 1C0 - no sound after installing XP

  Hello

  I have a problem.
  I have a Satellite A200 - 1C0.
  The original OS is Win Vista but I change Win XP profesional of Pentecost.

  I installed all the drivers, but it does not recognize my sound system.

  He told me that I have no hardware installed.

  What can I do?

  Hi dude

  Looking already here in the forum?
  I presume you didn't!

  This forum is a very large database and contains numerous threads on the same themes.

  IF your question has been discussed here 10,000 times.

  Check this one:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=112885

  Concerning