Satellite A30-232: SD-R6112 cannot burn CD/DVD

Similar Questions

• Satellite A30: Error number (11122) cannot load the bitmap with recovery CD

  I have a Toshiba A30 I want to reformat with the recovery disk. I get that day then I get an error that reads:

  The error number (11122) cannot load the bitmap file. Height max = 100

  The hard drive has now been deleted and I can't sent this message to reformat.

  Can someone help me on this please.

  Hello

  Satellite A30 is quite old and I wonder what report you something like this after so long. I put t know exactly what is happening, but it will be interesting to know a few things:

  Have you noticed a similar problem before?
  Are you using the original disk or some copy?
  Is there a problem with the HARD drive?

  Please do a little bit more about these things.

• Satellite A20-130: SD-R2412 cannot read that DVD burned in some optical drives

  Hello

  I have a laptop Satellite A20-130, running Windows XP and Ununtu Dapper in a double score. My 2nd laptop is not a Toshiba. When I burned the DVD (DVD + R) with my laptop Toshiba no and played against them in my Satellite everything has worked well.

  However, when I bought a new optical drive for my 2nd my Toshiba laptop suddenly stopped playing DVDs burned in this new optical disc (I was using exactly the same brand of disc and the same format - DVD + R). I tried the old DVD (those burned in the laptop before that material from the optical drive has been upgraded) and they can still read perfectly well.

  This problem applies to both Ubuntu and Windows XP. Computer support portable 2nd said that sounds like a problem of firmware with my Toshiba. I updated the driver for my optical drive Toshiba R2412 SD (which according to the manual of the leader, seems to fix a DVD-Ram compatibility issue). Now the reader occasionally reads some of the new DVDs burnt (after doing lots of noise and waiting for ages), but more often that not, I get an error message saying that the device cannot be read, because the format is wrong or the device needs to be formatted.

  This computer non-Toshiba laptop read DVD, it burns using the optical drive improved perfectly.

  Hello

  Satellite A20 is old enough laptop model, and after intensive use, it may be that the disc is more sensitive. If all this happens occasionally there no explanation just why this happens.

  I know it's pretty boring, but I don't see any magic solution. In the end, you should test with new disc.

• Satellite P20: Device DVD Player reads only the DVD but cannot burn CD & DVD

  Hello

  I have a toshiba P20, and I'm having a lot of problems with it. One of them is my DVD UJ811. I don't really know what is happening, the drive was already replaced and a few weeks later, it was exactly like the front, and the service provider made me pay almost 70EUR for a budget of 400EUR rejected.

  I would like to know what really should do, I can't read the CD and I can not burn CD/DVDs, I can just read DVDs, nothing else.

  I have seen some forums on the net, too many people in the world has the same problem I have and I really need to know what is the best solution for me.
  Thank you

  Hello Rafael

  I'm very surprised by your post it here because I've used Satellite P20-303 (a red) about two years. Laptop is now used by my brother and it works perfectly. I don't really know what problems you have, but I never noticed anything suspicious. Up to now I removed the cooling Grill on the bottom twice to clean the unit, and that's all. After that laptop computer cleanup runs a lot more quiet then before.

  Back to ad: I have to be honest and say that I traded with TEAC DV - W22E DVD - rom. original drive was DVD - RW and TEAC DV-W22E DVD-RAM. My brother use it pretty extensively, but until now there is no problem at all.

  I don't really know what the service is doing, but if possible replace the drive TEAC one. I can tell you with certainty, it works very well. Moreover, according to the description of your problem, I am sure that the drive is faulty.
  You can replace one. It's very simple to do.

• Re: Satellite Pro A300 - not able to burn the DVD

  I am able to read a cd, I am able to record on a cd, I can read a DVD but I'm not able to record to a DVD.

  The device driver is TS-L632H - it says on the side of the DVD Player Recorder DVDs, DVD RW rewritable multi.
  I tried updating the driver but it says that it is up-to-date.

  I am trying to record to DVD RW 16 x memorex. The regional setting is correct.

  Evidence Wally assistance would be much appreciated.

  Have you tried to burn various DVDs from different manufacturers?
  No, this!

  I couldn't t burn various DVDs until I tested the TDK DVD-R my burner drives agreed this drive and I was able to burn successfully.

  Check it out!

• Satellite Pro L450 - 13G - able to burn a DVD?

  It is clearly said DVD + rewritable outside the disc tray and CD + RW, but put an end to any attempt to burn a DVD in any burner "found." A burner is one of the main reasons I chose this model.
  Nobody really knows if he is supposed to be an engraver of DVD in the L450 - 13g?

  The MS software is there. I checked Device Manager and all I get is CDDVDW TS L633C which is not useful.

  Otherwise, it should not be printed on the Board.

  Hey Buddy,

  Exactly, what program you use for burning discs?

  As wrote Akuma that it could be linked to the high - and lowerfilters that you should remove in the Windows registry. Therefore, follow the instructions on the Microsoft Knowledge Base.

  If it doesn t work you can test another burning like CD Burner XP program. It s freeware tool compatible with all versions of Windows.

• After the upgrade of Windows 10 cannot burn a DVD

  After upgrade to 8.1 Windows 10 I get the following message when I try to burn a DVD

  "Something is preventing a burn DVD success.

  Use the ISO, saved to the following location to burn your disc more later:

  Svc.ISO of C:\Users\Kenneth\Documents\2015-08-09 of worship.

  Is there a setting that I missed in the upgrade?  In addition, I can't locate the ISO image file mentioned or at least I'm not in this directory?

  osprey20

  What you describe is probably a problem first elements 13/13.1 you may encounter on Windows 10 64-bit or 64-bit Windows 8.1.

  It is it happened 10 Windows. I did the upgrade even you did and all of my programs to Premiere Elements survived successfully. One of the first things I checked after the upgrade was the burn on DVD-video on DVD and AVCHD on DVD.

  First Elements ATR troubleshooting: PE: Premiere Elements on Windows 10 daily discoveries

  From your description of your results, go to edit Menu/preferences/general and look at the effect with and without the following preference disabled

  "Use hardware acceleration (works on Intel HD Graphics 2000 or higher)"

  Also, go to the folder of encoded files and delete its contents (encoding of temporary disk files)? Make sure that this folder is located in an area with lots of free space on the hard disk. See change preferences/Menu/Scratch disks and disk encoding category that goes back to the hard drive folder of encoded files.

  Let us start here and then decide what then.

  Thank you.

  RTA

• Satellite Pro M30 - cannot burn CD/DVDs

  Hello!

  Since I got my machine, I was not able to burn CDs or DVDs either. I get a 'power calibration error' that normally I guess means the disc broke. But, because it is a whole new drive (less then a month) and it can read all CD and DVD I throw at it, I doubt that it's a hardware problem. After a few minutes of Googling, I came across a thread made by other people encounter the same problem with this same drive (Mat * a UJ - 820 s), but no good solution (at least none that worked for me).

  Here is a log from Nero (6.6.0.1 (also tried older versions)). I hope this is of some use, because this is getting very frustrating... Thank you.

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver = 2.0.1.68, size = 160016 bytes, created 28/07/2004 16:51:12
  Nero version: 6.6.0.1
  Recorder: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected: ATAPI
  CD-ROM: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD-RAM UJ-820 s atapi Port 1 ID 0 DMA: on
  CdRomPeripheral: Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

  = CDRom-Device-map =.
  CARPET * a DVD-RAM UJ-820 s D: CDRom0
  Generic DVD-ROM E: CDRom1
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 74448896 (0) byte
  ShowDrvBufStat: 0
  BUFE: 0
  Physical memory: 510 MB (523184 KB)
  Free physical memory: 228MB (233560kB)
  Memory in use: 55%
  QUERIES PFiles: 0x0
  Static write speed table: 0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2004
  CD-ROM (ISO)
  14:02:51 #1 text 0 file Isodoc.cpp, line 6165
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  14:02:51 text 0 file Burncd.cpp, line 2832 #2
  CARPET * A DVD - RAM UJ-820 S
  Protection against the imbedding of buffer enabled

  14:02:51 #3 text 0 file Reader.cpp, line 127
  Player running

  14:02:51 #4 text 0 file Writer.cpp, line 122
  Writer MATT * A DVD-RAM UJ-820 s running

  14:02:51 #5 ISO9660GEN-11 file geniso.cpp, line 3286
  First address writeable = 0 (0x00000000)

  14:02:51 #6 text 0 file Burncd.cpp, line 3117
  Turn on Track-at-once, using CD-R/RW media

  14:02:51 #7 Text 0 File DlgWaitCD.cpp, line 256
  Last possible write address on media: 359845 (79:59.70)
  Last address to be written: 51106 (11:23.31)

  14:02:51 #8 Text 0 File DlgWaitCD.cpp, line 268
  Write in overburning mode: No. (enabled: CD)

  14:02:51 #9 Text 0 File DlgWaitCD.cpp, line 2309
  Recorder: MAST * a DVD-RAM UJ-820 s;
  CDR code: 00 97 26 66; Entry YSOS of: CMC Magnetics Corporation
  ATIP data:
  Special Info [hex] 1: D0 00 98, 1 a 2: 61 42 (LI 97:26.66), 3: 4F 3 b 47 (LO 79:59.71)
  Additional info [hex] 01:00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

  14:02:51 #10 Text 0 File DlgWaitCD.cpp, line 430
  > Protocol of DlgWaitCD activities:
  =========================================

  14:02:51 Text 0 File ThreadedTransferInterface.cpp, Line 844 #11
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 51107 (51107) original disc POS = #51107 / 11:21.32
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51105 blocks [MAST * a DVD-RAM UJ-820 s]
  --------------------------------------------------------------

  14:02:51 #12 text 0 file ThreadedTransferInterface.cpp, line 1047
  Prepare recorder [MAST * a DVD-RAM UJ-820 s] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 104974336, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _RecDep_ | _CtrlAdr_
  -150 | Lead-in | 0 | 0x00 | 0x41
  -150 | 1. 0 | 0x00 | 0x41
  0 | 1. 1. 0x00 | 0x41
  51107 | Lead-out | 1. 0x00 | 0x41

  14:02:51 text 0 file ThreadedTransferInterface.cpp, line 1096 #13
  Removed 2 blocks from end of track 1. Length: 51107-> 51105.

  14:02:52 #14 phase 24 file dlgbrnst.cpp, line 1853
  Caching of files started

  14:02:52 #15 text 0 file Burncd.cpp, line 4003
  Cache writing successful.

  14:02:52 #16 phase 25 file dlgbrnst.cpp, line 1853
  Caching of files completed

  14:02:52 #17 phase 36 file dlgbrnst.cpp, line 1853
  Burn process started at 16 x (2 400 KB/s)

  14:02:52 #18 text 0 file ThreadedTransferInterface.cpp, line 2497
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  14:02:52 #19 text 0 file Mmc.cpp, line 20673
  Set BUFE: Protection against embedding of stamp-> ON

  14:03:11 #20 SCSI-1106 file Cdrdrv.cpp, line 1432
  SCSI Exec, HA 1, YOU 0, LUN 0, buffer 0x03D90000
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x2A 0x00 0x00 0x00 0 x 01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
  Sense data: 0xF1 00 x 0 0 x 03 0xFF 0xFF 0xFF 0x6A 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:11 #21 CDR-1106 file Writer.cpp, line 311
  Power calibration error

  14:03:11 #22 text 0 file ThreadedTransfer.cpp, line 229
  all writers idle, stopping conversion

  14:03:12 #23 text 0 file ThreadedTransfer.cpp, line 223
  conversion idle, stopping reader

  14:03:12 #24 CDR - 201 file WriterStatus.cpp, line 200
  Invalid write state
  CARPET * A DVD - RAM UJ-820S\H1 T0

  14:03:12 #25 TRANSFER file-18 WriterStatus.cpp, line 200
  Could not perform PlageFin

  14:03:12 #26 text 0 file Mmc.cpp, line 15477
  start closing a Session

  14:03:12 #27 SCSI-1106 file Cdrdrv.cpp, line 1178
  SCSI Exec, HA 1, YOU 0, LUN 0
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
  Sense data: 0 x 70 0x00 0x03 0x00 0x00 0x00 0 x 00 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:12 #28 CDR-1106 file WriterStatus.cpp, line 249
  Power calibration error

  14:03:12 #29 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  14:03:12 #30 text 0 file WriterStatus.cpp, line 258
  falling back to disc fixation

  14:03:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
  Set remaining time: 0:00,000 (0ms)-> OK

  14:03:12 #32 phase 38 file dlgbrnst.cpp, line 1853
  Burn process failed at 16 x (2 400 KB/s)

  Existing drivers:
  File ' Drivers\PXHELP20. SYS: Ver = 2.02.62a, size = 20016 bytes, created 28/10/2003 11:02 (Prassi/Veritas driver for win 2 K)
  File 'Drivers\atapi.sys': Ver = 5.1.2600.2180 (xpsp_sp2_rtm.040803 - 2158), size = 95360 bytes, created 03/08/2004 21:59:44 (driver for rec)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Here's how I just fixed my misfortunes:

  In short: go to controller - device manager and select IDE ATA/ATAPI: try to change only "PIO" mode instead of "Ultra DMA Mode" on the IDE channel that uses your DVD player, namely the secondary IDE channel (since 1 is probably your drive). It should say "Location 1" on the tab where the reader is NOT zero.

  Ultra-DMA is obviously more recent and faster and better, but I think that it infiltrates the specified performance of the PIO-mode. It took me about 10 minutes to write about 3 gigs.

  (1) uninstall manually each device driver that seemed even remotely connected to the "Mat * one" or "DVD" or "CD" INCLUDING "Standard dual channel PCI IDE Controller" and "secondary IDE channel".

  (2) to ensure a hard reboot (power off)

  (3) Windows to automatically detect any material it appears after reboot begins

  (4) one of these elements has been the "secondary IDE channel"... or in any case... go to Panel of-> system-> hardware: secondary IDE channel.
  b change of "Ultra DMA mode" "PIO" mode only

  (5) go to control panel-> hardware-> device-> IDE ATA controllers Manager / ATAPI-> secondary IDE channel: Transfer Mode = "PIO only" to ensure that this relocation, you just live kept this adjustment, otherwise set it as such and again, DO NOT change your "location 0" define, show your secondary ide channel tab should say "location 1". "

  (5) - hard reboot again

  (6) the system should come in and automatically detect your CD-ROM / DVD-ROM / Optical Drive / DVD - RAM drive both at the next reboot.

  It should then work.

• Satellite A40-S435: the drive cannot burn CD-R/CD-RW but can read DVD-ROM

  Hello
  my laptop is Toshiba A40-S435.
  I'm currently problems writing CD - R or CD - RW drive CD - RW?
  There is noise whenever I insert the CD - RW into the CD - RW drive!
  But able to read DVD-R and sometimes intermittent reading CD - R disc?
  Is - this CD - RW drive is defective? My burner is TEAC DW 224th - a 7.2 A

  Or would that be the problem of software that may have a break on my CD - RW drive?

  My current configuration are:
  Configuration of the device is all devices
  Technology HT is Enable with PM
  Dynamic CPU frequency mode is always high

  Speed session is seeing no tick on silent mode SET or SET Normal Mode?

  You can send an e-mail and respond to [email protected]

  Please help and advise.

  Hello

  I think it s not a question of setting wrong, but it could be a malfunction of the player.
  Maybe the lens can not calibrate correctly.
  I think noise appears during the insertion of the disc because the drive is trying to read or to recognize the CD.
  In this case there is not much to do. You can try using different media and if this does not work if the disk needs to be replaced.

• "Session Fixation error" - cannot burn CD/DVD with Qosmio F45-AV11

  Hello... m from Saudi Arabia. I have a problem with my DVD - RW Drive (TEAC DV-W28SL) drive with my Qosmio F45-AV11. When I try to burn CDs, it is always 'Mistake of Fixation of Session', "could not perform Fixation" etc and I lost a lot of blank CD, I can't burn successfully. Please help me how to solve this problem:

  Here is the text of newspaper which shows:

  Toshiba
  -***-3005-4001-0556-76E0-0900-4026-X8E5-*** (*)

  Windows XP 6.0
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 169792 bytes, created 14/03/2007 12:02:04

  NT-SPTI used
  Nero Version: 7.5.14.2
  Internal Version: 7, 5, 14, 2
  (Nero Express)
  Recorder: Version: M.6A - HA 1 YOUR 0 - 7.5.14.2
  Adapter driver: HA 1
  Drive buffer: 2000kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: M.6A - HA 1 YOUR 0 - 7.5.14.2
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: TOSHIBA MK2035GSS iaStor Port 0 ID 0 DMA: on

  = CDRom-Device-map =.
  TEAC DV-W28SLCTF F: CDRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 83886080 (0) bytes
  BUFE: 0
  Physical memory: 2037 MB (2086720 KB)
  Free physical memory: 993MB (1017672kB)
  Memory used: 51%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2008
  Digital Jukebox (MP3, WMA, Nero)
  21:35:30 #1 text 0 file SCSIPTICommands.cpp, line 411
  LockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  21:35:31 #2 text 0 file Isodoc.cpp, line 6517
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: REAL
  Multisession: FALSE
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  21:35:31 #3 text 0 file Burncd.cpp, line 3178
  TEAC DV-W28SLCTF
  BURN-Proof activated

  21:35:31 ISO9660GEN #4-11 file Geniso.cpp, line 3341
  First address writeable = 0 (0x00000000)

  21:35:31 #5 text 0 file Burncd.cpp, line 3490
  Turn on Track-At-Once, using CD-R/RW media

  21:35:47 #6 Text 0 File DlgWaitCD.cpp, line 307
  Last possible write address on media: 359848 (79:59.73)
  Last address to be written: 314215 (69:51.40)

  21:35:47 #7 Text 0 File DlgWaitCD.cpp, line 319
  Write in overburning mode: No.

  21:35:48 Text 0 File DlgWaitCD.cpp, line 2940 #8
  Recorder: TEAC DV - W28SLCTF;
  CDR code: 00 97 27 28; Entry YSOS of: Princo Corporation
  ATIP data:
  Special Info [hex] 1: F0 00 80, 2:61 1 b 1 c (LI 97:27.28), 3: 4F 3 b 4 a (LO 79:59.74)
  Additional info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

  21:35:48 #9 Text 0 File DlgWaitCD.cpp, line 493
  > Protocol of DlgWaitCD activities:
  =========================================
  Insert the disc to write to.
  (Average in drive: CD - R.) Medium required by compilation: CD-R/RW.)

  21:35:49 text 0 file ThreadedTransferInterface.cpp, line 792 #10
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 20217 (20217) original disc POS = #20217 / 4:29.42
  relocatable, pos to drive for the cache-write implementation not required / required
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 20215 blocks [F: TEAC DV-W28SLCTF]
  --------------------------------------------------------------

  21:35:50 #11 text 0 file ThreadedTransferInterface.cpp, line 995
  Prepare [F: TEAC DV-W28SLCTF] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Session closed, fixed disk
  3 to 3 titles: Idx 0 Idx 1 next Trk
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 41711616, ISRC ""
  Introduction DAO:
  ===========
  ___Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | ___Size_ | ___NWA_ _ | _RecDep___
  293849 | Lead-in | 0 | 0x41. 0 | 0 | 0x00
  293849 | 3. 0 | 0x41. 0 | 0 | 0x00
  293999 | 3. 1. 0x41. 20217 | 293999 | 0x00
  314216 | Lead-out | 1. 0x41. 0 | 0 | 0x00

  21:35:50 #12 text 0 file ThreadedTransferInterface.cpp, line 1066
  2 blocks from output taken at the end of track 3. Length: 20217-> 20215.

  21:36:10 #13 text 0 file SCSIPTICommands.cpp, line 231
  Error LockVolume: access is denied.

  21:36:10 #14 Text 0 File SCSIPTICommands.cpp, Line 254
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  21:36:12 #15 text 0 file SCSIPTICommands.cpp, line 209
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  21:36:12 #16 text 0 file Burncd.cpp, line 4263
  Caching options: cache CDRom or network-Yes, small files-no)<>

  21:36:12 #17 phase 24 file dlgbrnst.cpp, line 1760
  Caching of files started

  21:36:12 #18 text 0 file Burncd.cpp, line 4382
  Cache writing successful.

  21:36:12 #19 phase 25 file dlgbrnst.cpp, line 1760
  Caching of files completed

  #20-21: 36:12 Phase 36 file dlgbrnst.cpp, line 1760
  Burn process started at 24 x (3 600 KB/s)

  21:36:13 #21 text 0 file ThreadedTransferInterface.cpp, line 2712
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to 293999 #.

  21:36:14 #22 text 0 file MMC.cpp, line 22351
  Set BUFE: BURN - Proof-> ON

  21:36:14 #23 text 0 file ThreadedTransfer.cpp, line 269
  Size of the memory pipe 83836800

  21:37:20 #24 text 0 file MMC.cpp, line 17112
  start closing a Session

  21:37:23 #25 SPTI-1176 file SCSIPassThrough.cpp, line 179
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1176)
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0 x 72
  Meaning of Qual: 0x03
  CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 71 00 05 00 00 00 00 0E 00 00 00 00 72 03

  21:37:23 #26 CDR-1176 file ThreadedTransferInterface.cpp, line 1244
  Session fixation error
  F: TEAC DV-W28SLCTF

  21:37:23 #27 text 0 file MMC.cpp, line 17112
  start closing a Session

  21:37:24 #28 SPTI-1176 file SCSIPassThrough.cpp, line 179
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1176)
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0 x 72
  Meaning of Qual: 0x03
  CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 71 00 05 00 00 00 00 0E 00 00 00 00 72 03

  21:37:24 #29 CDR-1176 file ThreadedTransferInterface.cpp, line 1244
  Session fixation error
  F: TEAC DV-W28SLCTF

  21:37:24 #30 phase 38 file dlgbrnst.cpp, line 1760
  Burn process failed at 24 x (3 600 KB/s)

  21:37:24 #31 Text 0 File SCSIPTICommands.cpp, Line 254
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  21:37:28 #32 text 0 file Cdrdrv.cpp, line 11061
  DriveLocker: UnLockVolume completed

  21:37:28 #33 text 0 file SCSIPTICommands.cpp, line 411
  UnLockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  Existing drivers:
  File ' Drivers\ADPU160M. SYS: Ver = 6.4.645.100 (NT.051018 - 1332), size = 98408 bytes, created 02/11/2006 12:50:35

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

  Waiting for your valuable response.

  It s pretty cool that you post the log file but I doubt that it could be useful.
  To my eyes the CD/DVD drive is faulty or the CD that you used are not entirely compatible.

  I had some burning questions with my CD/DVD drive, but I could solve this problem by using a different CD and DVD from another manufacturer.
  I have read that many people recommend using TDK CD - R or DVD - R media.
  I checked these discs and my drive supports it fully.

  Maybe you should try it too.

  Welcome them

• Have downloaded video 40mins Humax box flash drive, then to Windows Media player, I can play but cannot burn to DVD, HELP please.

  As it is said above, why can I not burn on a DVD + RW 4.7 GB.

  This problem happened to me before, what program did you use to burn DVDs, windows media player can only burn songs on CD/DVD, not work for video files. You can try another call convertxtodvd DVD burning program, it solve my problem, and here is a guide step by step on How to use it to burn videos to DVD to play on DVD player. Write me if you need another Assistant.

• Cannot create Windows DVD, burning the disc - Satellite L350

  Can someone help I'm on a Toshiba satellite L350
  I'm trying to burn a DVD with Windows DVD maker. It is the fourth I've done and the previous ones were all OK.

  I can't burn the DVD, I tried both types of disc and made about 10 attempts today.
  When I try to burn it starts OK then I get about 34% and get an error message

  I had two different error messages, it says "cannot create the DVD error unspecified.". "
  The other says "cannot create DVD catastrophic failure"

  As Akuma wrote, it can be a problem creating Windows DVD and has nothing to do with the functionality of optical disc drive. It is good to check the updates.

  Can you test the WEIRD feature using a different burning application?

• Satellite U505 - S2960 - drive external Supermulti cannot burn

  I use Satellite U505 - S2960 and I bought just driver Toshiba external supermulti for burning of jobs.

  After I connected the external hard drive, it can read DVD but cannot burn a DVD.
  The USB Sleep and Charge page always pop up the same I disable so I just uninstall.

  It seems that the problem is not there...
  I wonder how can I do my laptop to work with my new external dvd burner that is the same brand...

  Either way, I am using Windows 7

  Thanks in advance for any suggestions

  Hello

  What exactly is the problem?
  Why are you not able to write anything on a DVD? Do you get any error messages?

  Sleep function & load allows to recharge USB devices like mobile phones or other devices using the USB port even if the laptop is in sleep mode.

  I put t see a link between sleep & charge and external DVD drive

  By the way; What burning software do you use? I use Nero. For me the best burning software

• Re: No sound on Satellite A30

  Hi all

  I have a Toshiba Satellite A30-232 model. For awhile I have no sound. First of all, I tried to re-install the audio driver unfortunately when I try to deinstallieren driver restarts at the window (a blue screen appears) so thay only I can delete is safe mode. After so many try, I decided to use the recovery disk, but again the same problem it really is strange no? (I'm sure that the sound card is ok because in safe mode, I hear the beep).

  Please me know because I think for a long time, but I found no solution.

  Thank you very much

  Yes, it's really strange.

  Have you checked Manager and State of the card device after the installation of clean operating system?
  Have you checked the sound settings and volume knob?

  The same situation with headphones?

• Update the BIOS on Satellite A30 303

  Having a Satellite A30-303.
  With no intern work DVD.
  Have a usb DVD boot.

  I wonder if I can update Bios from Ubuntu. I need execute a .exe.

  Or if I can take a floppy and run the file BACK.

  Hello!

  For the Satellite A30 only one based on windows BIOS update is available.
  I think this will not work on Ubuntu and install Windows to make this update.

  Normally on Windows systems, you need to download the BIOS update, extract the .exe file and start it. That's all.

  Good bye